| 1 | 1 | M&L for replacement of nuts and bolts, gaskets, copper winding and testing of electric motor 10 HP, 900 RPM,415 Volts, 3 Phase, 50 Hz with super enamelled copper wire of superior quality as per existing guage including varnishing, insulating material, replacement of defective bearing, greasing oiling etc and including reassembling fixing in position making connection testing and commissioning. complete all as specified & directed by Engr-in-Charge. (Make of bearing : SKF/TATA/NBC) | | 2 | Each Job |
|---|
| 2 | 2 | All as item No 1 here in above but of capacity 7.5 HP | | 2 | Each Job |
|---|
| 3 | 3 | All as item No 1 here in above but of capacity 5 HP | | 3 | Each Job |
|---|
| 4 | 4 | All as item No 1 here in above but of capacity 0.5 HP | | 3 | Each Job |
|---|
| 5 | 5 | Draining and cleaning of ETP tanks removing sludge and deposing the sludge complete all as specified and directed by Engineer in charge.\n\nNote:- No of Tank - 5 Tank clean in each month \n Total - 5 x 6 (Qty) = 30 Job | | 30 | Each Job |
|---|
| 6 | 6 | Supply & Fixing in replacement FASD Star Delta starter 17.5 HP Three phase complete all as specified and directed by Engineer in charge. (Make : Cat No. SS94362 of L&T or equivalent to Siemens/ Legrand/ABB) | | 2 | Each |
|---|
| 7 | 7 | Supply & Fixing in replacement pneumatic time delay relay 0-60 sec complete all as specified & directed by Engr-in-Charge. (Make : KRTPN10-1 of BCH or equivalent in L&T) | | 8 | Each |
|---|
| 8 | 8 | Supply & Fixing in replacement contactor ML1.5 415V AC complete all as specified & directed by Engr-in-Charge. (Make : cat part no. SS91851 of L&T or equivalent in Seiments / Legrand/ABB) | | 14 | Each |
|---|
| 9 | 9 | Supply & Fixing in replacement foot valve heavy duty of size 50mm complete all as specified and directed by Engr-in-Charge : (Make : Zoloto/Kirloskar/ Leader/ AUDCO) | | 2 | Each |
|---|
| 10 | 10 | Supply & Fixing in replacement AC induction tubular heater 9 KW, 415 volts, 3 phase of length 1.5m complete all as specified and directed by Engr-in-Charge. (Make - Telelec/Escort/USGC). | | 30 | Each |
|---|
| 11 | 11 | Supply & Fixing in replacement 3 pole power contactor 32 Amps type ML2 with 2NO+2NC complete all as specified and directed by Engr-in-Charge. (Make : Cat No. SS90701 of L&T or equivalent in Siemens/Legrand/ABB) | | 12 | Each |
|---|
| 12 | 12 | Taking out motor from 20 HP ,1400 RPM blower/pump set and rewinding of electric motor squirrel cage induction 20 HP, 1400 RPM, 415 Volts 3 Phase, 50 Hz with super enamelled copper wire of superior quality as per existing guage including varnishing, insulating material including reassembling fixing in position making connection testing and commissioning complete all as specified & directed by Engr-in-charge. | | 1 | Each Job |
|---|
| 13 | 13 | Supply & Fixing in replacement MCCB 3 pole, 415V AC, 200 Amp rating 36 KA rupturing capacity, thermal magnectic release, complete with any retrofit work, terminal links and copper thimbles complete all as specified & directed by Engr-in-charge (Make : Cat Part No CM980610000 of L&T or equivalent to Siemens/ Legrand/ABB) | | 2 | Each |
|---|
| 14 | 14 | Supply & Fixing in replacement MCB 3 pole, 415V AC, 32 Amp rating 10 KA rupturing capacity, thermal magnectic release, complete with any retrofit workcomplete all as specified & directed by Engr-in-charge . (Make : Cat Part No BB30320B of L&T or equivalent in Siemens/Legrand/ABB) | | 8 | Each |
|---|
| 15 | 15 | Supply & fixing in replacement 3 core 4 Sqmm PVC insulated & round sheathed bright annealed copper conductor flexible cable for voltage grade 1100 V as per IS: 694 complete all as specified & directed by Engr-in-charge (Make : Finolex/ Polycab/Kalinga/ Havells) | | 180 | RM |
|---|
| 16 | 16 | Supply & fixing in replacement 3 core 6 Sqmm PVC insulated & round sheathed bright annealed copper conductor flexible cable for voltage grade 1100 V as per IS: 694 complete all as specified & directed by Engr-in-charge (Make : Finolex/ Polycab/Kalinga/ Havells) | | 150 | RM |
|---|
| 17 | 17 | Supply & fixing in replacement single core 2.5 Sqmm PVC insulated unsheathed, FRLS & multistranded bare copper conductor for voltage grade 1100 V as per IS: 694 complete all as specified & directed by Engr-in-charge (Make : Finolex/ Polycab/Kalinga/ Havells) | | 200 | RM |
|---|
| 18 | 18 | M&L in replacement of Air break contactor AC3, 50Amps, 3 Phase, coil voltage 220V AC complete all as specified and directed by Engr-in-Charge. (Make :- Cat No LCID80 of Schneider or equivalent in L&T / Siemens/ Legrand/ABB) | | 2 | Each |
|---|
| 19 | 19 | M&L in replacement of Air break contactor AC3, 25Amps, 3 Phase, coil voltage 220V AC complete all as specified and directed by Engr-in-Charge. (Make :- Cat No LCID25 of Schneider or equivalent in L&T / Siemens/ Legrand/ABB) | | 3 | Each |
|---|
| 20 | 20 | M&L in replacement of Air break contactor AC3, 9 Amps, 3 Phase, coil voltage 220V AC complete all as specified and directed by Engr-in-Charge. (Make :- Cat No LCID09 of Schneider or equivalent in L&T / Siemens/ Legrand/ABB) | | 8 | Each |
|---|
| 21 | 21 | M&L in replacement over load relay of 5.5-8 Amp type LRE-12 complete all as specified and directed by Engr-in-Charge. (Make :- Schneider/L&T/Siemens/ Legrand/ABB) | | 2 | Each |
|---|
| 22 | 22 | M&L in replacement of MCB ,double pole 10 Amps B curve with 10 KA rupturing capacity complete all as specified and directed by Engr-in-charge. Cat No BB20100B of Make Schneider or equivalent in Siemens// L&T/ Legrand/ABB | | 2 | Each |
|---|
| 23 | 23 | M&L in replacement of stainless steel water Spray Nozzels 16LPM; 1/2 BSP complete all as specified and directed by Engr-in-Charge. (Make : as per sample) | | 150 | Each |
|---|
| 24 | 24 | M&L in replacement of monobloc Pump set of capacity 7.5 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection complete all as specified and directed by Engr-in-Charge. (Make : Model No KDS852 of Kirloskar or equivalent in Crompton / Beacon/ KSS) | | 1 | Each |
|---|
| 25 | 25 | M&L in replacement of monobloc Pump set of capacity 3.0 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection complete all as specified and directed by Engr-in-Charge. (Make : Model No KDS325 of Kirloskar or equivalent in Crompton / Beacon/ KSS) | | 1 | Each |
|---|
| 26 | 26 | M&L in replacement of monobloc Pump set of capacity 0.50 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection complete all as specified and directed by Engr-in-Charge. (Make : Model No KDS0510 of Kirloskar or equivalent in Crompton / Beacon/ KSS) | | 1 | Each |
|---|
| 27 | 27 | M&L in replacement of Non return valve 50mm complete all as specified and directed by Engr-in-Charge. (Make: Zoloto/ AUDCO/ KIRLOSKAR/ LEADER) | | 1 | Each |
|---|
| 28 | 28 | Supply and installation of 04 xLED Lamps Weather and Water proof (36W 600mm x 600 mm Square PL Armstrong quadra series) with cabling to be done through SS Capping Argon Welded with SS walls of the washing chamber suitable to the existing site with all fixing accessories complete all as specified and directed by Engr-in-Charge. (Make: Syska SSK-PL-36WSQ 5.7K or equivalent in Bajaj/ Phillips/ Havells) | | 25 | Each Job |
|---|
| 29 | 29 | Supply & Fixing in replacement of Hull resting trolley wheel of size 410mm x 95mm complete all as specified and directed by Engr-in-charge. | | 4 | Each |
|---|
| 30 | 30 | Supply and fixing of Exhaust fan heavy duty of size 600mm sweep of 900RPM, 3 Phase, 220 Volt, 50 Hz AC with metal body including all accessories, connections, testing, assembling and making good to disturbed surfaces of wall including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge. (Make: Model Turbo Force SP of Havells or equivalent in Bajaj/Philips/ Crompton Greaves) | | 1 | Each Job |
|---|
| 31 | 31 | Material and Labour for replacement of Drain Pump(ss304) with Motor 1 HP, as specified and directed by Engineer-in-Charge. Make: KSB/Kirloskar/Grundfos | | 1 | Each Job |
|---|
| 32 | 32 | Material and labour for overhauling of Hull pulling gear box of ratio 70:1 type 400 with taking out gears , rope drum with rope & replacement of gear shaft , locks , gasket set,nuts & bolts top up gear oil of standard grade , greasing, replaceing defective control panel and accessories comprising the following items. Rates to include replacement of minor spares (control copper wiring, aluminium lugs, nut bolts) complete all as specified and directed by Engr-in-Charge.\n(a) MCB 32Amp TP-01No (b) Power Contactor ML1.5-02No (c) Overload relay-01No. (c) MCB DP 6 to 10Amp-02No (d) Panel Enclosure SS304-01No . | | 1 | Each Job |
|---|
| 33 | 33 | M&L for replacement of Floating shaft made out of M.S. EN8 material medium carbon steel of Cylindrical shape of size dia100mm and length1.80mtr and shaft end both side machining with keyway slot as per sample weight approx. 110.98kg. Make –Speedage/USGC/ Speed-O-Controls. \n | | 2 | Each |
|---|
| 34 | 34 | M&L for replacement of Rotary geared limit switch ratio 48:1 with 2 contacts shunt type(1N.O. + 1N.C.) in IP54 Enclosure complete all as specified and directed by Engr-in-Charge. Make : Cat part no. RG/LS/2C of Make USGC or equivalent to Speedage /Speed-O-Controls. | | 1 | Each |
|---|
| 35 | 35 | M&L for replacement of Hydraulic thrustor brake 150mm 18kg type MDT150-18 complete all as specified and directed by Engr-in-Charge. Make- USGC or equivalent to Speedage/ Speed-O-Controls . | | 1 | Each |
|---|
| 36 | 36 | M&L for replacement of Hydraulic thrustor 18kg 3 phase 415V AC type ST-520 complete all as specified and directed by Engr-in-Charge. MakeUSGC or equivalent to Speedage/Speed-O-Controls. . | | 1 | Each |
|---|
| 37 | 37 | Supply and fixing in replacement of damaged degreasing washing chamber gate in two parts of size 2800mmx2260mmx50mm. Each gate made out of gate frame outer side by angle iron of size 50mmx50mmx5mm and inner side of gate made out of MS flat compartmental type with glass wool/acaustic material and gate frame covered (washing chamber side) by SS sheet grade 304, 1.6mm thick & outer side CRC MS sheet 1.6mm thick welded on Gate frame with suitable size factory made hinge and nut bolts with handles including cutting/welding/erecting and testing at site complete all as as specified and directed by Engineer-in-charge. | | 2 | Each |
|---|
| 38 | 38 | Supply and fixing in replacement of damaged Hull Painting chamber sliding gate in two parts of size 2500mmx3370mmx50mm. Each gate made out of gate frame outer side by angle iron of size 50mmx50mmx5mm complete sliding, gate fabricated box type by MS flat compartmental type frame work with acoustic material and sliding gate covered both side by CRS MS sheet 1.6mm, including supply and fixing of transparent double glass sheet of thickness 6 mm fixing in center of the gate of size 1780mmx840mm with frame and two suitable size wheel with bearing and wheel holding clamps and six holding MS roller with bearing and holding bolts with nuts complete all as specified and directed by Engineer in charge. Make of bearing : SKF/FAG/ZKL | | 2 | Each |
|---|
| 39 | 39 | Supply and fixing in replacement of damaged SS round grade 304 off size 25mmx5300mm by grouting on earth by holding clamp including cutting and welding complete all as specified and directed by Engineer-in-charge. | | 1 | Each Job |
|---|
| 40 | 40 | Supply and fixing in replacement of sliding gate system rack 1.3 meter on sliding gate with the help of welding, nut bolts (suitable for Nice Make ROBUS Operator Unit) complete all as specified and directed by Engineer-in-charge. | | 4 | Each |
|---|
| 41 | 41 | Supply and fixing in replacement of Pneumatic Solenoid valve 100NB with Air Pipe & Pipe with all connected accessories complete all as specified and directed by Engr-in-Charge. Make-Rotex/Trident/Aira (Model ECF100) | | 3 | Each |
|---|
| 42 | 42 | Supply and fixing in replacement of Pneumatic Solenoid valve 50NB with Air Pipe & Pipe connected accessories complete all as specified and directed by Engr-in-Charge. Make-Rotex/Trident/Aira (Model ECF50) | | 3 | Each |
|---|
| 43 | 43 | Supply and fixing in replacement of cotton filter with filter press of size 600mmx600mm complete all as specified and directed by Engr-in-Charge. | | 25 | Each |
|---|
| 44 | 44 | Supply and fixing in replacement of Bib cock 15mm in filter press madeout of Gun metal/Brass with necessary connections as per sample complete all specified and directed by Engr-in-Charge. Make- Sant/Zoloto/Rotex | | 25 | Each |
|---|
| 45 | 45 | Supply and fixing in replacement of waste water collecting tray made out of CRC MS sheet of size 2565mmx260mmx220mm; 2mm thick duly powder coated painted with cutting welding on filterpress including waste water connection by 50mm GI pipe as per sample complete all as specified and directed by Engineer-in charge. | | 1 | Each |
|---|
| 46 | 46 | Supply and fixing in replacement of Heating Element protected SS tray (to protect overflow of alkaline chemical micelles), 1.6mm thick of size 4100mmx260mm resting on SS grade 304 pipe of size frame 38mmx38mmx5mm with welded on alkaline tank complete all as specified and directed by Engineer-in charge. | | 1 | Each Job |
|---|
| 47 | 47 | Supply and fixing in replacement of MCCB 250Amp 4Pole 36KA 415V AC with SS enclosure 2mm thick wall mounting type with locking arrangements and cable connections complete all as specified and directed by Engineer-in charge. (Make : Cat No CM98065OOPO of L&T or equivalent in Siemens/ Legrand/ABB) | | 4 | Each |
|---|
| 48 | 48 | Supply and fixing in replacement of Bus bar chamber 300Amp TPN 4 strip equal size with SS enclosure 2mm thick wall mounting type with cable connection complete all as specified and directed by Engineer-in-charge. (Make-Siemens/L&T/ Legrand/ Scheider) | | 1 | Each |
|---|
| 49 | 49 | Supply and fixing in replacement of vertical TPN DB 250Amp 6Way with MCB 32Amp SP-18Nos (6No in each phase) with SS grade 304 enclosure 2mm thick wall mounting type with cable connections complete all as specified and directed by Engineer-in-charge. (Make-L&T/Siemens/ Legrand/ABB) | | 4 | Each |
|---|
| 50 | 50 | Supply & fixing in replacement of single core 25 Sqmm PVC insulated unsheathed copper conductor flexible multistranded cable for voltage grade 1100 V as per IS: 694 complete all as specified & directed by Engr-in-charge (Make : Finolex/ Polycab/Kalinga/ Plaza/ Havells) | | 100 | RM |
|---|
| 51 | 51 | Supply and fixing in replacement of warm gear box S1 coupling with rubber block and warm gear box bearing with oil seal complete all as specified & directed by Engr-in-charge | | 1 | Each Job |
|---|
| 52 | 52 | Material and Labour of rewinding of 3HP SQ Cage induction motor 3 Phase 415V AC by Super enameled copper wire with class \"B\" insulation alongwith replacement of ball bearing complete all as specified & directed by Engr-in-charge | | 2 | Each |
|---|
| 53 | 53 | Supply and fixing in replacement of Fume exhausted blower mounted on roof of degreasing washing plant chamber including rewinding of 5HP Sq cage motor 3 Phase 415V AC height not less than 5 meter complete all as specified & directed by Engr-in-charge | | 2 | Each Job |
|---|
| 54 | 54 | Supply and fixing in repair of overhauling helical rotor pump /chemical pump series RN with replacement of oil seal and ball bearing complete all as specified & directed by Engr-in-charge. Make : Roto | | 1 | Each Job |
|---|
| 55 | 55 | Supply and fixing in replacement of rubber gasket of size 60mmx5mm mounted on hull painting sliding gate by adhesive with flap on both sides along the length of size 3370mm gate complete all as specified & directed by Engr-in-charge. | | 2 | Each Job |
|---|
| 56 | 56 | Supply and fixing in replacement of power contactor 50Amp AC1 coil voltage 220V AC complete all as specified & directed by Engr-in-charge. Make :Cat No. LCI321 of Schnieder or equivalent in L&T/Siemens | | 8 | Each |
|---|
| 57 | 57 | Material and labour for replacement of heating elements 9 kw 2\" BSP 3 phase 400V length 610mm complete all as specified & directed by Engr-in-charge. Make - Cat Part No. SHLX-1-90-610 of Escort or equivalent in Theeta / telelec / Spotheat | | 30 | Each |
|---|
| 58 | 58 | Supply and fixing in replacement of step down transformer 415/220V AC 500VA double wound complete all as specified & directed by Engr-in-charge. Make : Micro/USGC/National | | 4 | Each |
|---|
| 59 | 59 | Material & Labour for replacement floor paint filter size 0.8mx20mx50mm Mat Type – Class ‘A’ Glass Fiber Grade : G3 (EN779) Color : Green + White Thickness : 50 mm Weight : >250g/m2 Paint Hold Capacity : 2450 g/sqm Avg. Paint Arrest : 92% Rated Air Flow : 0.65 cum/sec Media Velocity : 2.5 m/sec Initial Temp Resistant : Up to 177 Degree ‘C’ Flame Resistant : Non Flammable complete with removal of old filter from floor after carefully taking out MS grating, removal of old filter and cleaning filter frame, replace filter media, refixing grating complete all as specified & directed by Engr-in-charge. Make : Automative solution/Environmental Engineering Co/Athlete. \n\n | | 60 | RM |
|---|
| 60 | 60 | Material & Labour for replacement of ceiling Air Filter Type : Progressively Structured , Polyester Thermally Bonded Impregnated, Grade : F5 (EN779) Thickness : 22 mm ,Weight : 600g/sqm Dust Hold Capacity : 437g/sqm Avg. Dust Arrest : 94% Rated Air Flow : 900cum/hr Media Velocity : 0.25m/sec ,Temp Resistanto 100 Degree complete with removal of old filter from ceiling after carefully taking down ceiling support and refixing after replacement of filters complete all as specified and directed by Engr-in-Charge. Make : Automative sulution/Environmental Engineering Co/Athlete | | 60 | Sqm |
|---|
