Providing Hand Ball, Basket Ball, Shuttle Court And Providing Internal, External Paintings & Plumbing, Sanitary And Civil Repairs To Old Existing Building To Emrs For Boys At Gandhari (V&M) In Kamareddy District
Tender Value
96.46 Lakhs
Estimated cost
Bid Submission
28 Dec 2020
0 days left
EMD
97000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KAMAREDDY → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Hand Ball, Basket Ball, Shuttle Court And Providing Internal, External Paintings & Plumbing, Sanitary And Civil Repairs To Old Existing Building To Emrs For Boys At Gandhari (V&M) In Kamareddy District
BOQ
| S.No | Subwork Name | Specification Number | Quantity | UOM | Rate(INR) | Amount(INR) |
|---|---|---|---|---|---|---|
| 1 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 51.00 | 1 Rmt | 483.43 | 24655.00 |
| Supply and laying of 3.5 Core 25 Sq.mm under ground PVC XLPE armoured alluminium cable of make Polycab/RPG/ Finolex/ Havells / Paragon / V-Guard, 1100V grade with ISI mark by excavating trench in soil upto 0.9Mt deep laying the cable on sand cushion twenty centi meter (20 cm) thick and covering the cable with bricks and back filling the trench with excavated earth witohout stones or hard materials and making the surface proper duly providing route indicators embedded in cement concrete including cost and conveyance of all materials to site, labour charges for laying the cables and connections as per IS 1244 and as directed by Engineer-in-charges complete for finished item of work. | ||||||
| 2 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 20.00 | Each | 92.00 | 1840.00 |
| Supply and fixing of 10A, 1 way Module Modular switch of makes Legrand/Schneidec etc., including cost and conveyance of all materials to work site., etc., complete for finished item of work. | ||||||
| 3 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 9.00 | Each | 7920.00 | 71280.00 |
| Supply and transportation of 90W LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range,P.F > 0.90, System having efficacy >90 lumens/watt, with Ingress protection IP66,Driver surge protection >10KV, THD<15%,CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, InbuiltElectrical protections like Over voltage,short circuit, Over load, Open CircuitMiswiring, etc complete with 5 yearswarranty. The contractor has to furnish the manufacturer warranty letter, LM 79 andLM 80 tificates.LUMINAIRE MAKE : VIN /HPL / GOLDMEDAL / GM / MILLION / C&S /RR Electric / IB LED / MIC / Promptec /Luker / Lumens (India) / Sieger / Renesola/ TRINIC / STANJO / PANASONIC / Rhino | ||||||
| 4 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 102.00 | Each | 1047.40 | 106835.00 |
| Supply and transportaion of 22W, +/10%, >/2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF>0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as pe IS, minimum CRI>80 etc., complete with 5 years warranty with BIS Certification with BIS Certification. LUMINAIRE MAKE : Phillips/OSRAM/GE Venture/Wipro/ Crompton/Bajaj/Havells/Jaquar/IB LED/Panasonic/ Halonix/ HPL/Syska/Eveready/Surya/Keselec/FIEM. LED MAKE : Phillips Lumileds/CREE/NICHIA/OSRAM/SAMSUNG/LG LEDs | ||||||
| 5 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 16.00 | Each | 11779.10 | 188466.00 |
| Supply and transportation of 90WATT . LED Flood light Luminaire made of pressure die cast aluminum housing with powdercoated, having toughened glass cover,IP 65/66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, input voltage range of 100 to 270 volts AC,power factor = 0.90, high power LED\s having efficacy 130lumens/watt and junction temperature < 85 degree centigrade of IP65 with optics, total harmonic distortion less than 10% at 110 Volts AC, driver efficiency =90% etc complete. LUMINAIRE MAKE : PHILIPS / OSRAM / GE / CROMPTON / BAJAJ / SCHREDER / VIN / HALONIX / HAVELLS / HPL.LED MAKE : PHILIPS LUMILEDS / CREE / N | ||||||
| 6 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 1.00 | 1 Rmt | 3836.21 | 3836.00 |
| Providing independent earthing for main switches integrated circuit cutouts and moters with 40mm dia Medium grade GI Pipe of TATA/Zenith/GST make of 2.5 m length duly providing 12mm dia 16 Nos. holes and rewired bolts, nuts and washers, checknuts, Humepipe ring 18 inches dia, 2 inch thick etc., as per IS specifications with necessary double GI earth wire NO. 8 SWG inclkuding filling with equal preparation of salt and charcoal in layers including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work. | ||||||
| 7 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 2.00 | Each | 4065.20 | 8130.00 |
| Supply and fixing 8 way SPN Distribution board with IP-20 protection of make Standard / Havells / HPL/Toyoma/ C &S.. suitable for single phase 40A Double pole Isolator of make Standard / Havells / HPL/Toyoma/ C &S. as incomer and 10KA-6-32A range single pole miniature circuit breakers Six numbers (6Nos) as out going with internal connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work. | ||||||
| 8 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 2.00 | Each | 2286.90 | 4574.00 |
| Supply and erecting fresh air exhaust fan of Crompton/Bajaj/.Orient make of light duty 250v AC 50 C/S 300 mm size (12\") 1350 RPM metallic body plastic blades, wire mesh, duly erected in an approved manner and painted with lettering by enamel paint the Sr. No. and date of erection including masonry work and making the hole and finishing including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work | ||||||
| 9 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 52.00 | Each | 2446.07 | 127196.00 |
| Supply and errecting Supply of 48\" (1200mm) Sweep 5 Star rated Ceiling Fan/Wall mounted fan without Regulator with 3 blades and double ball bearings and with condenser AC 250V 50 C/S of 48\" 1200mm sweep completely erected in position without regulator, canopy down rod up to 301.80 mm in length is provided with hook/clamps nuts and bolts and 24/02 flexible copper wire etc., complete and pointed with lettering by enamil paint the Sr. No. and date of errection including cost and conveyance of all materials and labour chargers etc., complete including 4% tornover tax on cost of all materials for finished item of work.Makes : Crompton HS Decora / Bajaj Regal star / Havells Fusion 50 / Orient Summer Crown / Usha technix decorative | ||||||
| 10 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 68.00 | Each | 2446.07 | 166333.00 |
| Supply and errecting Supply of 48\" (1200mm) Sweep 5 Star rated Ceiling Fan without Regulator with 3 blades and double ball bearings and with condenser AC 250V 50 C/S of 48\" 1200mm sweep completely erected in position without regulator, canopy down rod up to 301.80 mm in length is provided with hook/clamps nuts and bolts and 24/02 flexible copper wire etc., complete and pointed with lettering by enamil paint the Sr. No. and date of errection including cost and conveyance of all materials and labour chargers etc., complete including 4% tornover tax on cost of all materials for finished item of work.Makes : Crompton HS Decora / Bajaj Regal star / Havells Fusion 50 / Orient Summer Crown / Usha technix decorative | ||||||
| 11 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 38.00 | Each | 92.90 | 3530.00 |
| Supply and fixing of batten holder / slanting holder Anchor / Gold medal olive / Million zoom make with ISI mark in lieu of ceiling rose of light point with 40W bulb all connections including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work. | ||||||
| 12 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 64.00 | Each | 125.75 | 8048.00 |
| Supply and fixing of 6A 3/2 pin flush type socket with 6A switch control of Anchor / Gold medal olive / Million zoom make with ISI mark on a common switch board with earth continuity including wire leads, earth connections including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work | ||||||
| 13 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 250.00 | 1 Rmt | 76.85 | 19213.00 |
| Supply and run of 2 of 36/0.3mm (2.5Sq.mm) Fire Retardant P.V.C. insulated flexible copper cable of GM/L&T / RPG/ Havells / V-Guard /Power Flex/ Polycab/ Gold Medal/ Standard / Milion/ Vimal/ Suncab/ Paragaon /FortuneArt in existing metallic / non metallic pipe with run of 1 of 14/0.3mm (1Sq.mm) Finolex / RR kabel/ Fortune Art EBXL Fire Retardant P.V.C. insulated flexible copper cable including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work. | ||||||
| 14 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 122.00 | Point | 584.90 | 71358.00 |
| Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR P.V.C. insulated ISI Copper Cable GM/L&T/RPG/Havells/V-Guard/Power Flex/Polycab/Gold Medal/ Standard /Milion/ Vimal/ Suncab/ Paragaon/FortuneArt make in the existing metallic / non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings | ||||||
| 15 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 200.00 | 1 Rmt | 79.44 | 15888.00 |
| Supply and fixing of ISI mark 25mm dia 2.20mm thick PVC conduit pipe Sudhakar / GM/AKG/VIP / Modi make concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan pointand seperate plug point with M.S deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work. | ||||||
| 16 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 24.00 | Each | 1830.35 | 43928.00 |
| Supplying & Fixing Orissa Pan 580 mm x 440 mm white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap Hindware/ Parryware/ Neycer - ISI mark 580 mm x 440mm as approved by the Engineer-in-charge fixed in brick masonry with necessary ?S? trap of water closet, shall be encased in C.C. (1:2:4) 6\" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors. | ||||||
| 17 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 8000.00 | 1 Litre | 8.00 | 64000.00 |
| Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , Overheads & Contractors profit complete for finished item of work. | ||||||
| 18 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 24.40 | 1 Rmt | 928.25 | 22649.00 |
| Supplying & fixing 65mm Nominal bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , Overheads & Contractors profit complete for finished item of work. | ||||||
| 19 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 25.00 | Each | 257.95 | 6449.00 |
| Supplying & Fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors. | ||||||
| 20 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 20.00 | Each | 172.70 | 3454.00 |
| Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , Overheads & Contractors profit for finished item of work. | ||||||
| 21 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 20.00 | Each | 538.55 | 10771.00 |
| Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , Overheads & Contractors profit for finished item of work in all floors. | ||||||
| 22 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 20.00 | Each | 170.45 | 3409.00 |
| Supplying and fixing Ceramic soap dish heavy type of approved make ISI quality with NP screws etc., complete including cost and conveyance of all materials, labour charges for fixing , Overheads & Contractors profit for finished item of work in all floors | ||||||
| 23 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 28.00 | Each | 13480.45 | 377453.00 |
| Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3\-0\") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , Overheads & Contractors profit etc., complete for finished item of work as per Standard specification. | ||||||
| 24 | CIVIL ENGINEERING WORKS | 1301 & 1318 | 150.00 | 1 Rmt | 729.45 | 109418.00 |
| Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , Overheads & Contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318) for 152.40 mm dia to 914.40 (3\") depth | ||||||
| 25 | CIVIL ENGINEERING WORKS | 1301 & 1318 | 90.00 | 1 Rmt | 465.85 | 41927.00 |
| Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , Overheads & Contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318) for 101.60mm dia up to 914.40 ( 3\ ) depth | ||||||
| 26 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 60.00 | 1 Rmt | 431.75 | 25905.00 |
| Supply and fixing of 160mm dia 3 M Double Socket PVC/SWR Pipe - 4 Kg/cm and fixing all specials such as plain bends, offsets, door bends, single junctions double junctions as per site requirement fixing with PVC Clamps, if necessary with required number of including cost and conveyance of all materials etc., complete for finished item of work. | ||||||
| 27 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 150.00 | 1 Rmt | 223.82 | 33573.00 |
| S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 13.5 including cost and conveyance of all materials and labour charges , Overheads & Contractors profit complete for finished item of work for all floors. | ||||||
| 28 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 100.00 | 1 Rmt | 181.45 | 18145.00 |
| Supply and fixing of 110mm dia PVC/SWR Pipe - 4 Kg/cm and fixing all specials such as plain bends, offsets, door bends, single junctions double junctions as per site requirement fixing with PVC Clamps, if necessary with required number of including cost and conveyance of all materials etc., complete for finished item of work. | ||||||
| 29 | CIVIL ENGINEERING WORKS | 1326.0 | 31.00 | Each | 715.80 | 22190.00 |
| Supplying & fixing 150 mm x 100 mm SWG gully traps of ISI make conforming to ISI 651 & 4127 with C.I Grating & Constg. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12\"x9\") C.I Frame and hinged cover of standard make as directed, including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. (APSS No 1326) | ||||||
| 30 | CIVIL ENGINEERING WORKS | 1501 MORD. | 163.09 | Each | 6449.40 | 1051833.00 |
| Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, with water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. | ||||||
| 31 | CIVIL ENGINEERING WORKS | 1328.0 | 100.00 | 1 Rmt | 350.35 | 35035.00 |
| Supply and fixing of 110mm dia ISI mark PVC rain water spouts of 2.5mm thick including cost of necessary PVC bends, shoes and pipe clips and all other accessories and fixing in position including cost and conveyance of all materials to site sales and other taxes on all materials, all operational, incidental and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practicesuch as fixing in alignment etc., complete for finished item of work. (APSS NO. 1328) | ||||||
| 32 | CIVIL ENGINEERING WORKS | 1201, 1207 & 1212 | 572.74 | 10 Sqmt | 742.36 | 42518.00 |
| Painting to Old Iron work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ liter first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors | ||||||
| 33 | CIVIL ENGINEERING WORKS | 1201 & 1212 | 947.00 | 10 Sqmt | 1024.70 | 97039.00 |
| Painting to Old wood work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ liter first quality all shades to give an even shade over base coatof wood Primer finishing with putty for wood work after thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in All Floors | ||||||
| 34 | CIVIL ENGINEERING WORKS | 911.0 | 9940.00 | 10 Sqmt | 915.50 | 910007.00 |
| Painting to OLD External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911) | ||||||
| 35 | CIVIL ENGINEERING WORKS | 911.0 | 13217.00 | 10 Sqmt | 815.30 | 1077582.00 |
| Painting to Old internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911) | ||||||
| 36 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 309.82 | 1 Sqmt | 268.15 | 83078.00 |
| Providing Galvanized Iron fly proof wire mesh of not less than 20 guage of all materials to site, all labour charges and fixing in position etc., complete for finished item of work. | ||||||
| 37 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 128.47 | 1 Sqmt | 6921.00 | 889141.00 |
| Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter provision ? (only 2-glass shutters) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (80 mm x 52 mm) / (94 mm x 45 mm) x 2.20 mm for outer frames, (54 mm x 38 mm)/(39 mm x 58 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0 / 1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. | ||||||
| 38 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 240.54 | 10 Sqmt | 5395.50 | 129783.00 |
| Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, any brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, and all opertional, incidental and all labour charges such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work in all floors | ||||||
| 39 | CIVIL ENGINEERING WORKS | 701 & 707 | 79.14 | 10 Sqmt | 7711.74 | 61031.00 |
| Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work for Ground Floor | ||||||
| 40 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 510.00 | 1 Sqmt | 399.00 | 203490.00 |
| Supply and Fixing of Hot dipped Galvanized Iron Chain link mesh 8 guage - (4.0 mm) as per IS:2721-1979: 3\"X3\" (76mm x 76mm) - 8 Guage including cost and conveyance of all materials and labour charges etc., complete for finished item of work. | ||||||
| 41 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 320.00 | 1 Rmt | 443.00 | 141760.00 |
| Manufacturing, Supply and fixing of MS Angle 50x50x6mm \L\ Angle of size 0.90m and including cost and conveyance of all materials and labour charges etc., complete for finished item of work. | ||||||
| 42 | CIVIL ENGINEERING WORKS | 901, 903 & 904 | 255.36 | 10 Sqmt | 4329.04 | 110546.00 |
| Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work for Ground Floor | ||||||
| 43 | CIVIL ENGINEERING WORKS | As directed by the Engineer-in-charge | 283.20 | 10 Sqmt | 6108.10 | 172981.00 |
| Flooring with Rough Tandur / shahabad stone of minimum thickness 40mm thick, set over base coat of cement mortar (1:8) 12mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand and water etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work. | ||||||
| 44 | CIVIL ENGINEERING WORKS | 901906.0 | 592.86 | 1 Sqmt | 244.10 | 144717.00 |
| Plastering to even surfaces of wall with CM (1:4) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906) | ||||||
| 45 | CIVIL ENGINEERING WORKS | 402.0 | 3.55 | 1 Cum | 5152.70 | 18292.00 |
| Plain Cement Concrete M15 grade nominal mix (1:2.5:5) proportion (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Broken Granite (IS383, 1970) Machine Crushed graded metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work | ||||||
| 46 | CIVIL ENGINEERING WORKS | 601 & 615 | 109.63 | 1 Cum | 3856.50 | 422788.00 |
| Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 & 615) | ||||||
| 47 | CIVIL ENGINEERING WORKS | 501 & 504 | 222.73 | 1 Cum | 6183.15 | 1377173.00 |
| Brick Masonry in superstructure with CM (1:8) prop: using second class bricks of size 23 x 11 x 7 Cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work for Ground Floor | ||||||
| 48 | CIVIL ENGINEERING WORKS | 309 & 310 | 18.06 | 1 Cum | 242.85 | 4386.00 |
| Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310 | ||||||
| 49 | CIVIL ENGINEERING WORKS | 402.0 | 225.16 | 1 Cum | 4209.80 | 947879.00 |
| Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed | ||||||
| 50 | CIVIL ENGINEERING WORKS | 308.0 | 359.78 | 1 Cum | 336.55 | 121084.00 |
| Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, seigniorage charges, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building Foundation |
AI Tender Summary
Tender Timeline
Jan 01, 1900
11:30 IST
Tender Published
Tender notice published.
CompletedDec 28, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender