}

Repair/Renovation Of Advance Make Slip Ring Rotor Starter For Set No . 5 6 At Idgah Bps Re-Invited, EEEANDMWSCN-Delhi

Delhi Jal Board-DJB has published Repair/Renovation Of Advance Make Slip Ring Rotor Starter For Set No . 5 6 At Idgah Bps Re-Invited. Submission Date for this Tender is 14-12-2020. Starter Tenders in EEEANDMWSCN Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

26194413
Repair/Renovation Of Advance Make Slip Ring Rotor Starter For Set No . 5 6 At Idgah Bps Re-Invited
Open Tender
Indian
Delhi
EEEANDMWSCN
14-12-2020

Tender Details

Repair/Renovation Of Advance Make Slip Ring Rotor Starter For Set No . 5 6 At Idgah Bps Re-Invited , dismantling of the slip ring rotor starter 100 hp & 150 hp installed at idgah bps , removing of cable connection etc . , top contact , corner contact , bottom contact , moving tip , resistance set wound on porcelain tube , base board bakelite , manually operated oil immersed stator rotor sheet steel clad , floor mounting type m-osr3 suitable for 150 hp rotor controller oil cooled with operating handle suitably interlocked such that the stator can not be switched on unless the rotor is in full off position for ac slipring motors , 415v , 3 phase , 50 hz without oil . make:-advance , transformer oil make:-savita/power , replacement of copper lead of 120 sq . mm with thimble and tapping from rotor to motor . , fitting/installation of the rotor at set no . 6 , removing the cable connection , cleaning the site & making cable connection with in rotor & mccb at site etc . , complete servicing , over hauling and changing of the above spares parts in place of defective parts in rotor , greasing& cleaning of the mechanical parts . interlocking of cb with rotor starter testing & commissioning on load at site .

Key Value

Document Fees
INR 500 /-
EMD
INR 4700.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:Repair/renovation of advance make slip ring rotor starter for set No. 5 & 6 at Idgah BPS Re-invited
Sl. No. Item Description Item Code / Make Quantity Units
1 1.01 Dismantling of the slip ring rotor starter 100 HP & 150 HP installed at Idgah BPS, removing of cable connection etc. item1 2 Jobs
2 1.02 Top Contact item2 15 Nos
3 1.03 Corner contact item3 3 Nos
4 1.04 Bottom contact item4 15 Nos
5 1.05 Moving Tip item5 3 Nos
6 1.06 Resistance set wound on porcelain tube item6 1 Set
7 1.07 Base Board Bakelite item7 2 Nos
8 1.08 Manually operated oil immersed stator rotor sheet steel clad,floor mounting type M-OSR3 suitable for 150 HP rotor controller oil cooled with operating handle suitably interlocked such that the stator can not be switched on unless the rotor is in full off position for AC slipring motors,415V,3 Phase,50 Hz without oil. Make:-Advance item8 1 No
9 1.09 Transformer oil Make:-Savita/Power item9 150 Ltr
10 1.1 Replacement of copper lead of 120 sq.mm with thimble and tapping from rotor to motor. item10 60 Mtr
11 1.11 Fitting/installation of the rotor at set no.6,removing the cable connection, cleaning the site & making cable connection with in rotor & MCCB at site etc. item11 1 Job
12 1.12 Complete servicing, over hauling and changing of the above spares parts in place of defective parts in rotor, greasing& cleaning of the mechanical parts. Interlocking of CB with rotor starter testing & commissioning on load at site. item12 1 Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail