Proposed Renovation And Revamping Of Building S . E . W . A . Lucknow At Building No . 474/246/4 , Brahma Nagar , Near Raghuwar Kripa Marriage Hall , Sitapur Road , Lucknow ( U . P . )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Dec 2020
0 days left
EMD
1.46 Lakhs
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KANPUR → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Renovation And Revamping Of Building S . E . W . A . Lucknow At Building No . 474/246/4 , Brahma Nagar , Near Raghuwar Kripa Marriage Hall , Sitapur Road , Lucknow ( U . P . )
BOQ
| Name of Work: PROPOSED RENOVATION AND REVAMPING OF BUILDING S.E.W.A. LUCKNOW AT BUILDING NO. 474/246/4, BRAHMA NAGAR, NEAR RAGHUWAR KRIPA MARRIAGE HALL, SITAPUR ROAD, LUCKNOW (U.P.) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | (PART -1 : RENOVATION (LOWER GROUND FLOOR) | |||
| 2 | 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm (Size of Tile 600x600 mm) | 307.92 | Sqm. | |
| 3 | 3 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 5 | Cum. | |
| 4 | 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 851.82 | Sqm. | |
| 5 | 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 43.57 | Cum. | |
| 6 | 6 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil | 123.95 | Cum. | |
| 7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) | 18.97 | Cum. | |
| 8 | 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (Foundation) | 27.99 | Cum. | |
| 9 | 9 | Brick work with common burnt clay (non modular) bricks of class 150 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). | 14.25 | Cum. | |
| 10 | 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 32.96 | Qtl | |
| 11 | 11 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 coarse sand. | 163.36 | Sqm | |
| 12 | 12 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. 1 cement : 6 coarse sand. | 284.58 | Sqm | |
| 13 | 13 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) | 279.93 | Sqm | |
| 14 | 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 123.95 | Sqm | |
| 15 | 15 | Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Size of Tile 600x600 mm) | 232.55 | Sqm | |
| 16 | 16 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | 43.21 | Sqm | |
| 17 | 17 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | 28.92 | Sqm | |
| 18 | 18 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work (1st quality (Royal, Silk) Asian/Berger). | 564.51 | Sqm | |
| 19 | 19 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 163.36 | Sqm | |
| 20 | 20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 727.87 | Sqm | |
| 21 | 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 50 | Sqm | |
| 22 | 22 | Two coats of Melamine polishing on wood work including rubbing and polishing etc. complete. | 69.63 | Sqm | |
| 23 | 23 | Providing and laying 20 mm thick layer for water proofing treatment with asphalt felt over existing basement floor consisting of Asphalt of grade VG-30 of approved quality to Indian standard applied in three layers with stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface grading etc. complete. | 247.89 | Sqm | |
| 24 | 24 | Providing and laying 20 mm thick layer for water proofing treatment with asphalt felt over existing basement floor consisting of Asphalt of grade VG-30 of approved quality to Indian standard applied in three layers with stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface grading etc. complete. | 279.93 | Sqm | |
| 25 | 25 | TOTAL PART - 1 | |||
| 26 | 26 | (PART -2 : RENOVATION (UPPER GROUND FLOOR) | |||
| 27 | 27 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm | 467.48 | Sqm | |
| 28 | 28 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 2.89 | Cum. | |
| 29 | 29 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | 27.06 | Cum. | |
| 30 | 30 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 2091.51 | Sqm | |
| 31 | 31 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 108.07 | Cum. | |
| 32 | 32 | Reparing of M.s./Aluminium/ wooden doors, windows and ventilators required all complete and the directions of Engineer-in-charge. | 148 | Sqm | |
| 33 | 33 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil | 26.05 | Cum. | |
| 34 | 34 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | 3.26 | Cum. | |
| 35 | 35 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (Foundation) | 2.82 | Cum. | |
| 36 | 36 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (Plinth Beam/band) | 2.53 | Cum. | |
| 37 | 37 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 1.22 | Cum. | |
| 38 | 38 | Brick work with common burnt clay (non modular) bricks of class 150 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). | 9.69 | Cum. | |
| 39 | 39 | Brick work with common burnt clay (non modular) bricks of class 150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand). | 30.14 | Cum. | |
| 40 | 40 | Centering and shuttering including strutting, propping etc. and removal of form for : | |||
| 41 | 41 | Foundations, footings, bases of columns, etc. for mass concrete | 8.68 | Sqm | |
| 42 | 42 | Suspended floors, roofs, landings, balconies and access platform | 3.44 | Sqm | |
| 43 | 43 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | 21.99 | Sqm | |
| 44 | 44 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 9.21 | Qtl | |
| 45 | 45 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 coarse sand. | 431.69 | Sqm | |
| 46 | 46 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. 1 cement : 6 coarse sand. | 1196.51 | Sqm | |
| 47 | 47 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) | 379.75 | Sqm | |
| 48 | 48 | Extra for lining out plaster to imitate stone or concrete blocks walling. | 46.24 | Sqm | |
| 49 | 49 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as rvilinear portions of the building, for all heights and all levels etc. including: | |||
| 50 | 50 | a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and unctional design. | |||
| 51 | 51 | b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 nd polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. | |||
| 52 | 52 | c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 ins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item ncludes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. | |||
| 53 | 53 | Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding including width of groove) shall be measured in sqm. up to two decimal places. | 18.9 | Sqm | |
| 54 | 54 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by approved make & colours), of 1st quality conforming to IS : 15622, of approved make, in colours & shade, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | 16.09 | Sqm | |
| 55 | 55 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 83.56 | Sqm | |
| 56 | 56 | Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Size of Tile 600x600 mm) | 253.89 | Sqm | |
| 57 | 57 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | 165.1 | Sqm | |
| 58 | 58 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | 137.23 | Sqm | |
| 59 | 59 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work (1st quality (Royal, Silk) Asian/Berger). | 1576.26 | Sqm | |
| 60 | 60 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 431.69 | Sqm | |
| 61 | 61 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 2007.95 | Sqm | |
| 62 | 62 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 115.65 | Sqm | |
| 63 | 63 | Two coats of Melamine polishing on wood work including rubbing and polishing etc. complete. | 161.07 | Sqm | |
| 64 | 64 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. | |||
| 65 | 65 | With 16 mm thick beveled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO 5 (class 100 ) specifications | 116.41 | Sqm | |
| 66 | 66 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | |||
| 67 | 67 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 3794.96 | Kg | |
| 68 | 68 | Providing and fixing stainless steel (Grade 304) railing made of hallow tubes, chanells, plates etc. including welding grinding buffing, polising and making corvechare (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge.(for payment purpose only weight of stainless steel members shall be considered excluding fixing assessories such as nuts, bolts, fasteners etc. | 718.6 | Kg | |
| 69 | 69 | Providing and fixing of Tuflite/DPI 16mm thick Multicell UV protected Polycarbonate Panel System with 5 cells and 6 walls structure over structure Steel/MS purlin as per approved colour/shade. Co-extruded UV protected panels shall have width of 900mm to ensure best performance for wind uplift, vibration, oil canning, and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Welding or gluing up of standing seam is not acceptable. Panels shall be fixed on purlins with Stainless Steel retention clip of SS-304 grade and connectors. Snap-on connectors to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability. Panels shall have End-cap/Aluminium U-profile/Glazing bar for ends as per requirement. Panel shall be co-extruded with special anti-glare compound (if required) to make it anti-glare/soft light to prevent glare and sun streaks. | |||
| 70 | 70 | Polycarbonate panels shall not have yellowness index more than - 6.86 as per ASTM G 155 when tested for minimum of 1000 hours exposed to UV light source under Xenon Arc Lamp with irradiance 0.35 W/m2 @340 mm. | |||
| 71 | 71 | The polycarbonate panels must satisfy Dart drop impact test as per IS-14443 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a minimum of 1000 hours as per ASTM G 155. Panels shall be fixed over structural steel/MS purlins (will be paid extra) conforming to the detail technical specifications and as per approved architectural drawings. (U value - 1.62, Light transmission & Colour as approved). | 8.3 | Sqm | |
| 72 | 72 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). | 30.56 | Sqm | |
| 73 | 73 | Providing and fixing glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : with 5.0 mm thick liquor glass panes (weight not less than 12.5 kg per sqm) | 15.28 | Sqm | |
| 74 | 74 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete :25 mm thick | 192.93 | Sqm | |
| 75 | 75 | Door Fittings | |||
| 76 | 76 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | 2 | Each | |
| 77 | 77 | Providing and fixing approved brand and manufacture SS 304 grade D type 900mm Pull Handle with 32mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge. | 4 | Each | |
| 78 | 78 | Providing and fixing approved brand and manufacture SS 304 grade Glass to Glass Lock Round type with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge. | 2 | Each | |
| 79 | 79 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood | 0.58 | Cum. | |
| 80 | 80 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 6.3 | Sqm | |
| 81 | 81 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. | 2511.42 | Sqm | |
| 82 | 82 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: | 34.41 | Sqm | |
| 83 | 83 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) | 16.09 | Sqm | |
| 84 | 84 | Providing & laying of 40 mm brick ballast and sand under floor of toilet /sunken roofs including compacting as per directed by E/I. | 4.82 | Cum. | |
| 85 | 85 | Extra for providing, laying, designing and fixing of additional interior work in Double height entrance lobby as per direction by engineer-in charge or Architect. The rate shall include cost of labour, temporary timbering (shuttering), scaffolding / ladder, shifting of furniture items, lifting up and down, mechanical transportation, loading, unloading, any or special T&P for proper completion of the works. | 69.35 | Sqm | |
| 86 | 86 | (PART -3 : RENOVATION (FIRST FLOOR) | |||
| 87 | 87 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm | 417.77 | Sqm | |
| 88 | 88 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 1687.95 | Sqm | |
| 89 | 89 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 67.1 | Cum. | |
| 90 | 90 | Reparing of M.s./Aluminium/ wooden doors, windows and ventilators required all complete and the directions of Engineer-in-charge. | 120 | Sqm | |
| 91 | 91 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 coarse sand. | 324.75 | Sqm | |
| 92 | 92 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. 1 cement : 6 coarse sand. | 959.32 | Sqm | |
| 93 | 93 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) | 335.17 | Sqm | |
| 94 | 94 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by approved make & colours), of 1st quality conforming to IS : 15622, of approved make, in colours & shade, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | 12.98 | Sqm | |
| 95 | 95 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 68.71 | Sqm | |
| 96 | 96 | Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Size of Tile 600x600 mm) | 298.53 | Sqm | |
| 97 | 97 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | 68.64 | Sqm | |
| 98 | 98 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work (1st quality (Royal, Silk) Asian/Berger). | 1294.49 | Sqm | |
| 99 | 99 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 324.75 | Sqm | |
| 100 | 100 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 1619.24 | Sqm | |
| 101 | 101 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 50 | Sqm | |
| 102 | 102 | Two coats of Melamine polishing on wood work including rubbing and polishing etc. complete. | 215.8 | Sqm | |
| 103 | 103 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) | 12.98 | Sqm | |
| 104 | 104 | Providing & laying of 40 mm brick ballast and sand under floor of toilet /sunken roofs including compacting as per directed by E/I. | 3.9 | Cum. | |
| 105 | 105 | (PART -4 : RENOVATION (SECOND FLOOR) | |||
| 106 | 106 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm | 539.27 | Sqm | |
| 107 | 107 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 2436.71 | Sqm | |
| 108 | 108 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | 396.54 | Sqm | |
| 109 | 109 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 149.96 | Cum | |
| 110 | 110 | Reparing of M.s./Aluminium/ wooden doors, windows and ventilators required all complete and the directions of Engineer-in-charge. | 104 | Sqm | |
| 111 | 111 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. | |||
| 112 | 112 | (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : | |||
| 113 | 113 | With average thickness of 120 mm and minimum thickness at khurra as 65 mm. | 396.54 | Sqm | |
| 114 | 114 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. 1 cement : 6 coarse sand. | 2343 | Sqm | |
| 115 | 115 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by approved make & colours), of 1st quality conforming to IS : 15622, of approved make, in colours & shade, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | 17.56 | Sqm | |
| 116 | 116 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 93.71 | Sqm | |
| 117 | 117 | Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | 266.62 | Sqm | |
| 118 | 118 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | 186.38 | Sqm | |
| 119 | 119 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work (1st quality (Royal, Silk) Asian/Berger). | 2086.6 | Sqm | |
| 120 | 120 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 779.49 | Sqm | |
| 121 | 121 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 2866.09 | Sqm | |
| 122 | 122 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 593.9 | Sqm | |
| 123 | 123 | Two coats of Melamine polishing on wood work including rubbing and polishing etc. complete. | 242.12 | Sqm | |
| 124 | 124 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | |||
| 125 | 125 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | 8857.31 | Kg | |
| 126 | 126 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade | 622.8 | Sqm | |
| 127 | 127 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) | 17.56 | Sqm | |
| 128 | 128 | Providing & laying of 40 mm brick ballast and sand under floor of toilet /sunken roofs including compacting as per directed by E/I. | 5.28 | Cum | |
| 129 | 129 | PART -5 : PLUMBING WORK | |||
| 130 | 130 | SUB HEAD - A : (SANITARY FIXTURES & INTERNAL PLUMBING) | |||
| 131 | 131 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | 8 | Each | |
| 132 | 132 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap | 12 | Each | |
| 133 | 133 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms | 12 | Each | |
| 134 | 134 | Providing and fixing 600 x 450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete in all respect | 12 | Each | |
| 135 | 135 | Providing and fixing C.P. brass towel ring with C.P. brass wall brackets & C.P brass screws complete in all respect | 12 | Each | |
| 136 | 136 | Providing and fixing unplasticised PVC connection pipe with brass unions, 45 cm length. 15 mm dia nominal bore | 33 | Each | |
| 137 | 137 | Providing and fixing C.P. soap dish of approved make including providing & fixing screws, washers, cutting & making good the walls. | 12 | Each | |
| 138 | 138 | Providing and fixing toilet paper holder. C.P. brass | 8 | Each | |
| 139 | 139 | Providing and fixing CP brass twin coat hooks fixed on toilet door/wall with CP brass screws, complete in all respect | 8 | Each | |
| 140 | 140 | Providing and fixing stainless steel kitchen sink as per I.S.13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required complete in all respect Kitchen sink with drain board 510 x 1040 bowl depth 200 mm | 2 | Each | |
| 141 | 141 | Providing, fixing, testing and commissioning of C.P. brass single hole sink mixer with CP wall flange, swinging spout complete as required and making good. 15 mm nominal dia. | 2 | Each | |
| 142 | 142 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | 4 | Each | |
| 143 | 143 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing | 4 | Each | |
| 144 | 144 | Providing and Fixing, testing & commissioning of ABS Health Faucet (complete with hook and flexible tube min. Length 1.0 m) as required complete in all respect | 8 | Each | |
| 145 | 145 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore | 4 | Each | |
| 146 | 146 | Providing and Fixing, testing & commissioning C.P.brass wash basin mixer 15 mm nominal bore | 12 | Each | |
| 147 | 147 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore | 8 | Each | |
| 148 | 148 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore | 16 | Each | |
| 149 | 149 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore | 33 | Each | |
| 150 | 150 | SUB HEAD - B : (SOIL, WASTE, RAIN WATER AND VENT PIPES) | |||
| 151 | 151 | Providing and fixing 6 kg/sqcm soil, waste and vent pipes. 150 mm dia pvc pipe | 319 | Meter | |
| 152 | 152 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 150 mm diameter | 47 | Each | |
| 153 | 153 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rsoil, waste and vent pipes conforming to IS Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 150 mm diameter | |||
| 154 | 154 | Door bend | 14 | Each | |
| 155 | 155 | Plain bend | 16 | Each | |
| 156 | 156 | Heal rest | 10 | Each | |
| 157 | 157 | Double equal plain 100x100x100x100 mm | 2 | Each | |
| 158 | 158 | Single equal plain junction 100x100x100mm | 6 | Each | |
| 159 | 159 | Single unequal plain junction 100x100x100mm | 6 | Each | |
| 160 | 160 | Terminal guard. | 10 | Each | |
| 161 | 161 | Collar | 97 | Each | |
| 162 | 162 | Providing and fixing M.S. stays and clamps for sand cast iron / centrifugally cast (spun) iron pipes of diameter : 100 mm | 50 | Each | |
| 163 | 163 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: (F.T. + U.T.).(MAKE-SKF) 100 mm inlet and 100 mm outlet (Sand cast iron S&S as per IS: 3989 | 34 | Each | |
| 164 | 164 | Providing and fixing G.I. (class-C) pipes and fittings conforming to IS: 1239 clamps and hinges including cutting chases and holes and making good the walls and ceiling for waste pipes from wash basins, urinals kitchen sink and equipment waste connections pump deliveries & suction & condensate drainage as directed. | |||
| 165 | 165 | 40 mm nominal bore | 44 | Meter | |
| 166 | 166 | 50 mm nominal bore | 16.5 | Meter | |
| 167 | 167 | Providing, fixing and jointing UV stabilized uPVC rain water pipes conforming to IS:4985 (working pressure 6 kg/sqcm.) including all fittings such as bends, clamps, tees, cowls, clean out plugs etc including Fixing at wall / ceiling level supported by steel clamps & hangers etc. including Cutting, chases/holes in floors / walls / slab and making good the same after pipe have been duly laid and testing complete in all respects. Single socketed pipes 110 mm diameter | 176 | Meter | |
| 168 | 168 | Providing & fixing 75mm x 50mm G.I. waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to GI / CI waste pipe. | 15 | Each | |
| 169 | 169 | Providing and fixing Heavy Class SS grating with of approved design including setting in floor with cement motor to match with floor finish as per architect requirement . | 15 | Each | |
| 170 | 170 | Providing and fixing Heavy Class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and FT | 34 | Each | |
| 171 | 171 | Providing and fixing G.I. EXTENSION PIECE for 100 mm dia floor trap formed out of main pipe (Type A) with multiple side inlets, suitable for various dia pipes, side connections, including all fixtures and fittings as per site conditions and as per standard details and water tight sealing of joints and area surrounding the grating and as directed. | 15 | Each | |
| 172 | 172 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. | |||
| 173 | 173 | 300 X 300 MM | 4 | Each | |
| 174 | 174 | 450 X 450 MM | 4 | Each | |
| 175 | 175 | SUB HEAD - C : (WATER SUPPLY) | |||
| 176 | 176 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) SDR-11 pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall | |||
| 177 | 177 | 15 mm dia nominal bore | 83 | Meter | |
| 178 | 178 | 20 mm dia nominal bore | 132 | Meter | |
| 179 | 179 | 25 mm dia nominal bore | 121 | Meter | |
| 180 | 180 | 32 mm dia nominal bore | 66 | Meter | |
| 181 | 181 | Providing and fixing, testing and commissioning of chlorinated polyvinly chloride (CPVC) CTS SDR 11 hot & cold water pipes conforming to IS capable to withstand 27.6 kg/cm² at room tempreature water and 7.03 kg/cm² at 82°C and all fittings of CPVC SDR 11 like elbow, tee, reducers, couplers, brass threated male & female (adapoters, elbow, tees) and pipe clamps at 1.00 m spacing. The pipe fitting joining to be done with solvent cement as per manufacturers specifications & recommendations. This includes testing of joints complete as per direction of Engineer-Incharge. Concealed work, including cutting chases and making good the walls etc. | |||
| 182 | 182 | 15 mm dia nominal bore | 165 | Meter | |
| 183 | 183 | 20 mm dia nominal bore | 72 | Meter | |
| 184 | 184 | Providing and fixing, testing and commissioning of GI pipes Class-C and fittings conforming to IS:1239 (heavy class) complete with GI fittings (union and clamps including cutting holes in wall, makes chases in wall and making good the same in cement mortar 1 : 2 (1 cement : 2 coarse sand) as directed by Project Manager, complete in all respects for internal works) including pipe supports with galvanised MS slotted angle iron, clamps, spacers as required and making good where required. Internal work - Exposed on wall | |||
| 185 | 185 | 15 mm dia nominal bore | 10 | Meter | |
| 186 | 186 | 20 mm dia nominal bore | 110 | Meter | |
| 187 | 187 | 25 mm dia nominal bore | 275 | Meter | |
| 188 | 188 | 32 mm dia nominal bore | 220 | Meter | |
| 189 | 189 | 40 mm dia nominal bore | 132 | Meter | |
| 190 | 190 | 50 mm dia nominal bore | 44 | Meter | |
| 191 | 191 | Painting of exposed pipes with two or more coats of synthetic enamel paint of approved quality over a coat of red oxide zinc cromate primer including painting of legends in English with direction arrows. | |||
| 192 | 192 | 15 mm dia nominal bore | 10 | Meter | |
| 193 | 193 | 20 mm dia nominal bore | 110 | Meter | |
| 194 | 194 | 25 mm dia nominal bore | 275 | Meter | |
| 195 | 195 | 32 mm dia nominal bore | 220 | Meter | |
| 196 | 196 | 40 mm dia nominal bore | 132 | Meter | |
| 197 | 197 | 50 mm dia nominal bore | 44 | Meter | |
| 198 | 198 | Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. | |||
| 199 | 199 | 15 mm dia | 2 | Each | |
| 200 | 200 | 20 mm dia | 4 | Each | |
| 201 | 201 | 25 mm dia | 4 | Each | |
| 202 | 202 | 32 mm dia | 2 | Each | |
| 203 | 203 | 40 mm dia | 2 | Each | |
| 204 | 204 | 50 mm dia | 1 | Each | |
| 205 | 205 | Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete. | |||
| 206 | 206 | 40 mm dia. | 1 | Each | |
| 207 | 207 | Providing and fixing mosquito proof stainless steel overflow grating for over head water storage tanks vent pipes. 100 mm dia | 2 | Each | |
| 208 | 208 | Providing & Fixing of Butterfly Valve ISI marked with welding of flange and fitting with packing & complete in all respect, make: SIR/ KARTAR | |||
| 209 | 209 | 100 MM | 4 | EACH | |
| 210 | 210 | Providing & Fixing of Non Return Valve Dual PlateType ISI marked with welding of flange and fitting with packing & complete in all respect, make: SIR/ KARTAR | |||
| 211 | 211 | 100 MM | 1 | EACH | |
| 212 | 212 | Providing & Fixing of Non Return Valve Single PlateType ISI marked with welding of flange and fitting with packing & complete in all respect, make: SIR/ KARTAR | |||
| 213 | 213 | 100 MM | 1 | each | |
| 214 | 214 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : Make JINDAL/ SURYA | |||
| 215 | 215 | 100 MM | 80 | Meter | |
| 216 | 216 | Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m make: LIFE GURAD / SAFE PRO | 8 | EACH | |
| 217 | 217 | Supply of Hose Reel Fittings like Boll valve 25 MM1 No, Nippul 25 x 100 MM 4 No, Nippul 25 x 150 MM 4 No, MS Socket 25MM 1 No, Union 25 MM 1 No, | 8 | EACH | |
| 218 | 218 | Supplying and fixing single headed Internal Hydrant Valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal Make: LIFE GURAD / SAFE PRO | 8 | EACH | |
| 219 | 219 | Providing and fixing INTERNAL fire hose cabinet fabricated from 20 gauge M.S. Sheet with single glazed front door (with 4 mm thick glass) and locking arrangement, including Iran Angle necessary supports approximate size. | 8 | EACH | |
| 220 | 220 | Providing and fixing of Short Branch Pipe (SS) 63 mm X 15 mm ISI marked make : SAFEPRO/LIFEGUARD | 8 | EACH | |
| 221 | 221 | Supply & fixing of Iran Bracket for holding MS pipe 100 MM | 8 | EACH | |
| 222 | 222 | Providing & fixing of F B Inlet two way with flang, Packing , & Nut Bolt make: LIFE GURAD / SAFE PRO | 1 | EACH | |
| 223 | 223 | Supplying and fixing 63 mm dia, 15 m long RRL Hose Pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Gun Metal Make: LIFE GUARD/ SAFEPRO | 8 | 1 Length | |
| 224 | 224 | Supply & fixing of Pressure Release valve 25 MM make: PRATAP with Boll valve 25 MM | 1 | EACH | |
| 225 | 225 | Core cutting for passing ms pipe 100 mm with 6\" Diameter | 10 | 14 Nos | |
| 226 | 226 | SUB HEAD - B : FIRE EXTINGUISHER | |||
| 227 | 227 | Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. make: LIFEGUARD/ SAFEPRO | 24 | EACH | |
| 228 | 228 | Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. make: LIFEGUARD/ SAFEPRO | 2 | EACH | |
| 229 | 229 | SUB HEAD - C : Terrace Pump For Hydrant | |||
| 230 | 230 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required : Terrace Pump | 1 | job | |
| 231 | 231 | Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 | |||
| 232 | 232 | Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. | |||
| 233 | 233 | M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. | |||
| 234 | 234 | Suitable cement concrete foundation duly plastered and with anti vibration pads. | |||
| 235 | 235 | 900 lpm at 35 m Head | |||
| 236 | 236 | Supply & fixing of Electric panel suitable for terrace pump with automation facility assembled with L&T Parts | 1 | JOB | |
| 237 | 237 | Supply & fixing of Pressure Gauge make: H GURU & Pressure switch DENFOSS | 1 | SET | |
| 238 | 238 | Supply & fixing of Aluminium cable 4 C X 10 Sq.mm make: HAVALLS/ POLYCAB | 50 | Meter | |
| 239 | 239 | Supply & fixing of Copper cable 2 C X 1.5 Sq.mm make: HAVALLS/ POLYCAB | 50 | Meter |
AI Tender Summary
Tender Timeline
Dec 03, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 14, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 15, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender