Bharat Sanchar Nigam Limited-BSNL has published Rate Contract For Rectification Of Initial Defects Of Dea Sets At Various Sites Under Bsnl Ed-Ludhiana . ( Phase-I ) . Submission Date for this Tender is 14-12-2020. Wrenches and Drivers Tenders in Ludhiana Punjab. Bidders can get complete Tender details and download the document.
Name of Work:-Rate Contract for rectification of initial defects of DEA sets at various Sites under BSNL ED-Ludhiana.(Phase-I) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Providing maintenance free New Lead acid Batteries as a replacement of existing old batteries of following types/rating complete with first fill of electrolyte & first charging i/c replacement of leads, nut bolts ,terminals/thimbles complete as reqd. | |||
2 | 1.01 | 12 V, 150 AH ( M/S Exide Express Model No. FXPO-XP1500 or equivalent model of Similar Superior make) | Item1 | 15 | Nos |
3 | 1.02 | 12V, 130 AH ( M/S Exide Express Model No. FXPO-XP1300 or equivalent model of Similar Superior make) | Item2 | 20 | Nos |
4 | 2 | Supply Installation Testing commissioning of Super capacitor based DG cranking system consisting of suitable nos. of Supercapacitors and battery cahrger. The DG cranking device shall be suitable for starting of DG sets upto 25 KVA capacity as per specification attached. (M/S Delta/ Intelux/VNT or similar superior make) | Item3 | 45 | Nos |
5 | 3 | Replacement of following defective accessories in the existing DG sets with new accessories, complete as reqd. [ Dismantled defective accessories shall belong to vendor, credit for same has to be considered while quoting rates.] | Item4 | ||
6 | 3.01 | Stop Solinoid 12 volt (Engine shut off solenoid) | Item5 | 85 | Nos. |
7 | 3.02 | Mechanical Type RPM Cum Hour Meter | Item6 | 10 | Nos. |
8 | 3.03 | RPM Cum Hour Meter Chain | Item7 | 10 | Nos. |
9 | 3.04 | 12 Volt Electrical Battery Charger (SMPS ) i/c Transformer, Rectifier unit and Filter Circuit etc. complete as reqd. | Item8 | 23 | Nos. |
10 | 3.05 | Oil pressure gauge | Item9 | 20 | Nos. |
11 | 3.06 | Oil temperature meter with safety | Item10 | 18 | Nos. |
12 | 3.07 | Water temperature meter | Item11 | 20 | Nos. |
13 | 3.08 | Starting key switch | Item12 | 25 | Nos. |
14 | 3.09 | 100 amps MCCB 25 KA | Item13 | 20 | Nos |
15 | 3.1 | VAF meter | Item14 | 100 | Nos |
16 | 3.11 | 32 Amp 4 pole MCB | Item15 | 10 | Nos |
17 | 3.12 | 63 Amp 4 Pole MCCB | Item16 | 15 | Nos |
18 | 3.13 | DC voltmeter | Item17 | 100 | Nos |
19 | 3.14 | DC voltmeter | Item18 | 100 | Nos |
20 | 3.15 | Auto / manual Rotary switch | Item19 | 25 | Nos |
21 | 3.16 | Overspeed safety | Item20 | 100 | Nos |
22 | 4 | SITC of Automation relay in AMF panel for following rating of DG set compatible with all makes of EA sets complete as required ( ECON-ABT model of M/S Procom or equivalent model of Similar Superior make) | |||
23 | 4.01 | 15 KVA-50 KVA | Item22 | 55 | Nos |
24 | 5 | Automation relay in AMF panel for following rating of DG set ECON-ABT model of M/S Procom or equivalent model of Similar Superior make) | |||
25 | 5.01 | Upto 20KVA DEA set. | Item24 | 7 | Nos |
26 | 5.02 | Above 20KVA and upto 50KVA DEA sets | Item25 | 5 | Nos |
27 | 5.03 | Above 50KVA and upto 250KVA DEA sets | Item26 | 2 | Nos |
28 | 5.04 | Above 250KVA and upto 500KVA DEA sets | Item27 | 2 | Nos |
29 | 6 | Servicing of the self starter of DEA set i/c dismantling, cleaning of self with petrol, greasing and oiling of bearing i/c testing etc complete as reqd.(This item exclude the cost of parts associated with Self Starter.) | Item28 | 10 | Nos |
30 | 7 | Repairing of following faulty items in the self starter of DEA set i/c dismantling of unserviceable/ defective items, fixing with new one i/c connection, testing etc complete as reqd.[Note: Labour charges already covered in item No 3] | |||
31 | 7.01 | Carbon bush set | Item29 | 5 | Nos |
32 | 7.02 | Solenoid coil | Item31 | 5 | Nos |
33 | 7.03 | Bendex Gear | Item32 | 5 | Nos |
34 | 8 | Supply of 12 volt battery operated self starter suitable for engine alternator set in place of existing faulty self starter including fixing the same on the DG set making connection testing etc complete as required. | Item33 | 10 | Nos |
35 | 9 | Calibration of the fuel injection pump of following capacity of DEA sets of different makes and models under various exchanges I/c removal of fuel pump from site, transportation at Workshop, calibration of pump and nozzles, grinding and fixing the same after calibration at site in the existing DEA set etc complete as reqd. 1. Certificate from authorised service centre is to be submitted regarding calibration of fuel pump & nozzles. 2. This item exclude the cost of parts associated with fuel pump | |||
36 | 9.01 | up to 20 KVA DEA set | Item35 | 5 | Nos |
37 | 9.02 | More than 20 KVA and up to 50 KVA | Item36 | 5 | Nos |
38 | 9.03 | Above 50KVA and upto 250KVA DEA sets | Item37 | 5 | Nos |
39 | 9.04 | Above 250KVA and upto 500KVA DEA sets | Item38 | 5 | Nos |
40 | 10 | Extra charges for associated items of fuel pump, if required.[Note: Labour charges already covered in item No 9] | |||
41 | 10.01 | Delivery valve | Item40 | 5 | Nos |
42 | 10.02 | Delivery element | Item41 | 5 | Nos |
43 | 10.03 | Nozzle | Item42 | 5 | Nos |
44 | 11 | Repairing of cylinder head [if required] to stop the leakage after replacement of gaskets and repositioning of head (per head) etc. complete as reqd. | Item43 | 10 | Nos |
45 | 12 | Replacement / Repairing of faulty items in the existing Alternator up to 50 KVA Alternator at TE / BTS Sites i/c dismantling the faulty, replacement by new one i/c fixing, testing, commissioning etc. complete as reqd. | |||
46 | 12.01 | AVR Make National or S.S. | Item45 | 10 | Nos |
47 | 12.02 | Power Diode for Rotating Rectifier Assembly | Item46 | 5 | Nos |
48 | 13 | Rewinding of following parts of existing alternator upto 50 KVA with suitable size copper enamelled wire including providing of insulation of appropriate class, varnishing, assembling including transportation charges for alternator from Site to Workshop & back after repairing and dismantling, loading, unloading, transportation, safe Handling & Commissioning after repairing, testing etc complete as required. | |||
49 | 13.01 | Main Stator winding | Item48 | 5 | Nos |
50 | 13.02 | Main Rotor winding | Item49 | 5 | Nos |
51 | 13.03 | Exciter Stator winding | Item50 | 5 | Nos |
52 | 13.04 | Exciter Rotor winding | Item51 | 5 | Nos |
53 | 14 | Rewinding of following parts of existing alternator upto 50 KVA with suitable size copper enamelled wire including providing of insulation of appropriate class, varnishing, assembling including transportation charges for alternator from Site to Workshop & back after repairing and dismantling, loading, unloading, transportation, safe Handling & Commissioning after repairing, testing etc complete as required. | |||
54 | 14.01 | 12 Volts 88 AH | Item53 | 16 | Nos |
55 | 14.02 | 12 Volts 100 AH | Item54 | 10 | Nos |
56 | 14.03 | 12 Volts 130 AH | Item55 | 10 | Nos |
57 | 14.04 | 12 Volts 150 AH | Item56 | 10 | No |
58 | 14.05 | 12 Volts 150 AH | Item57 | 10 | No |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail