Guru Gobind Singh Indraprastha University-GGSIU has published Remodeling And Up-Gradation Of Vc Secretariat Of Ggsip University , Dwarka , New Delhi 110078 Sh Modular Furniture. Submission Date for this Tender is 11-12-2020. Civil Work Tenders in Project Manager, UWD GGSIPU Sector 16C, Dwarka Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: Remodeling and Upgradation of VC Secretriat of GGSIP University, Dwarka, New Delhi-110078 (SH: Modular Furniture). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Manufacturing, providing and placing in position machine made factory assembled Table of make Rockworth _ Zen Series or equivalent of STEEL CASE/HAWORTH/GODREJ INTERIO make (as\nper finally approved sample by department) of following dimensions with the following specifications. Providing and placing Cabin Table , Main table of Size : 1500(W) x 750(D) x 740(H) Return table of Size: 900W x 450D X 740mmH made of minimum 35mm thick MDF with approved shade of natural Veneer(minimum thickness of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type II. The exposed edge of worktop shall be secured with 1.5 mm-2 mm thick PVC edge banding tape of approved colour. The height of Worktop shall be 740-760 mm from ground level. The MDF board should be E-1 Grade with pvc edge banding. Top supported on MDF legs & modesty panel of 35 mm thick MDF with approved shade of natural Veneer (minimum thickness of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type II. The exposed edge of panale secured with 1.2mm-1.5mm thick PVC edge banding tape of approved colour. The wiring tray is made of steel sheet thickness 1.2mm. Epoxy powder coated spray color, baked at temperature 200 C°.Raceways contain the horizontal cable channel that fitted below table top and modesty panel tidily and effectively fitted betwwen the legs. Table should be provided with 3 drawer Metal pedestal of overall dimensions internal and external dimensions 400-420 mm (W) x 500-\n520 mm (D) x 600-620 mm ( H). Drawer should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x 300- 310 mm (W). Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra stability. All hardware shall be of reputed make/brand e.g. Hefele, Hettich, Dorma as per sample finally approved by the department. Product should be BIFMA rated SCSglobal certified for inhouse air quality and with 5 years warranty. | BI01010001010000000000000515BI0100001113 | 3 | Each |
| 2 | 2 | Manufacturing, providing and placing in position machine made factory assembled Storage of make Rockworth _ Zen Series_Cabinet or equivalent of STEEL CASE/HOWARTH/GODREJ INTERIOR make\n(as per finally approved sample by department) of following dimensions with the following specifications.Back Storage : The storages should be made of minimum Top 35mm thick MDF and 16-19 mm thick door, sides and shelves with approved shade of natural Veneer(minimum thickness of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type II. The exposed edge of worktop shall be secured with 1.5 mm-2 mm thick PVC edge banding tape of approved colour. The height of Worktop shall be 740-760 mm from ground level. The MDF board should be E-1 Grade with pvc edge banding. The exposed edge of panale secured with 1.2mm-1.5mm thick PVC edge banding tape of approved colour. The wiring tray is made of steel sheet thickness 1.2mm.\nProduct should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 5 years warranty.Back Storage 1650mmW x450mmD x740mmH | BI01010001010000000000000515BI0100001114 | 4 | Each |
| 3 | 3 | Highback Chair : Manufacturing, providing and placing in position machine made factory assembled Chair of make Rockworth_ Senses HB or equivalent series of STEELE/HAWORTH/GODREJ INTERIO (as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing in position of High back revolving chairs , Chair seat made up of insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back is made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture. Armrests should be adjustable with 120-160 mm adjustability with PU padded. Base: Black nylon base with 5 nos. nylon castors. Chair should be of 360 degree swivel Posture Control with multi pointer locking and synchro tilt mechanism and hydraulic gas lift gas lift to allows 90-100 mm. of height adjustment. Seat size 440 - 550 mm depth, Seat width of 530-550 mm Seat Height of 420-510mm with hydraulic height adjustability of 90-100mm. Sub assembly back size 550 - 620 mm height. Effective back height from Seat - 570mm, polyurethane foam for seat having density 65-70 kg/m3. Pedestal made of nylon base fitted with 5 nos. twin wheel castors (castor wheel dia. 60-70 cm), base pedestal dia 60-70 mm and pitch center dia. 700-720mm with castors, twin wheel castors injection moulded in Nylon etc. all complete as per manufacturers specification, approved sample and direction of Engineer-in-Charge. Chair should be SGS Gold BIFMA Certified product. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 5 years warranty. | 4 | Each | |
| 4 | 4 | Midback Chair : Manufacturing, providing and placing in position machine made factory assembled Chair of make Rockworth\n_ Senses mB or equivalent series of STEEL CASE/HAWORTH/GODREJ INTERIO (as per\nfinally approved sample by department) of following dimensions with the following specifications.Providing and placing in position of medium back revolving chairs. Chair seat made up of insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back is made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture. Armrests should be adjustable with 120-160 mm adjustability with PU padded. Base: Black nylon base with 5 nos. nylon castors. Chair should be of 360 degree swivel Posture Control with multi pointer locking and synchro tilt mechanism and hydraulic gas lift gas lift to allows 90-100 mm. of height adjustment. Seat size 440 - 480 mm depth, Seat width of 450-480 mm Seat Height of 460-530mm with hydraulic height adjustability of 90-100mm. Sub assembly back size 550 - 620 mm height. Effective back height from Seat - 570mm, polyurethane foam for seat having density 65-70 kg/m3. Pedestal made of nylon base fitted with 5 nos. twin wheel castors, base pedestal dia 600-650 mm and pitch center dia. 710mm with castors, twin wheel castors injection moulded in Nylon etc. all complete as per manufacturers specification, approved sample and direction of Engineer-in-Charge. Product should be BIFMA gold rated SCS global certified for inhouse air quality and with 5 years warranty. | 4 | Each | |
| 5 | 5 | Low Back Non Revolving Reading Chair : Manufacturing, providing and placing in position machine made factory assembled Chair of make Rockworth_ Senses Visitor or equivalent series of STEEL CASE/HAWORTH/GODREJ INTERIO(as per\nfinally approved sample by department) of following dimensions with the following specifications.Providing and placing in position of Visitor Chair . Seat made up of insert moulded polyurethane foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture, seat size 525 mm width (approx.), 540 mm depth (approx.), sub assembly back size 485 mm max. width, 620 mm height.(approx.), effective back height from Seat 570 mm. (approx.), polyurethane foam for seat moulded with density 65±4 kg/m3, sledbase leg frame welded assembly made of MS ERW round tube having outer dia 24mm (approx.) and thickness 2mm. including powder coating, based shoes on frame etc. all complete as per manufacturers specification. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 5 years warranty. | 8 | Each | |
| 6 | 6.1 | WORKSTATIONS: Manufacturing, providing and placing in position machine made factory assembled workstation of make Rockworth_ Rubix Series or equivalent of STEEL CASE/HAWORTH/GODREJ INTERIO\nmake (as per finally approved sample by department) of following specifications:Frame Work, Partition and Cable management : Frame work shall consist of main spine and return spine of aluminium extruded section of minimum thickness of\n1.2 mm. The overall thinkness of Panel base System should be 60-70 mm. The panel will be hollow inside to accommodate wiring for electrical/data and outer frame of panel should be made of extruded aluminium.The panel shall be made up of 3 mm thick MDF both sides of the wooden frame to create the hollow for the wire management. Finishes of panel above the worktop: Above the top fabric pinup with raceway on main spine between workstation. The hollow panel made of MDF and 3mm thick foam which is upholstered with 0.5mm thick fabric with half fabric pinup + half glass marker board. The thickness of partition panel should be 60-70 mm for main & 25mm thick return spine. Finishes of panel below the worktop: Below the top the hollow panel should be made of MDF tile and 0.5mm thick steel sheet pasted on MDF which is powder coated with EPC finish 80-90 microns for durability on the inside as well on the outside. The thickness of partition panel should be 60-70 mm for main spine & 25mm thick return spine . The panel outer aluminium frame is designed such a way that it can be easily slide in to the columns/ Connectors by means of stacking one over the other.Horizontal race way should be 150-170 mm height aluminium profile. There shall be complete cable management arrangement with openable raceway below worktop with provision for fitting electrical/data switches and holes for passing cable. Connectors/ Post Description: End Post: Aluminium 60-70 mm width – 1200-1250 mm height. One way post: Aluminium 60-70 mm width – 1200-1250 mm height. Two way post: Aluminium 60-70 mm width – 1200-1250 mm height. Three way post: Aluminium 80-120 mm width – 1200-1250 mm height. Four way post: Aluminium 80-120 mm width\n– 1200-1250 mm height. Brackets: Table top support: 50-60mm width steel bracket. Table top to table top connector: 150-170 mm Width x 120-140 mm Depth width connector. WIRE MANAGEMENT trolley connected to Top of table should contain the horizontal cable channel that fitted with a modesty panel tidily and effectively. Raceway should be made out of CRCA steel of thickness 2mm duly powder coated. Powder coating should of 60-70 micron thickness to be provided fitted to the under structure legs of table. Powder coating should be scratch resistance (cross hatch test 6x6 grid method). | 1 | Each | |
| 7 | 6.2 | Linear WORKSTATION – 1 group of two persons (Size : 1200mm x 600mm (Worktop Height) x 1200-1250 mm (Height of panel from Ground) for each person. | 1 | Each | |
| 8 | 7 | Providing & fixing of floor covering with modular carpet tiles of Vito Floor or equivalent of tile size 50*50cm or 25*100cm as per approved sample by Engineer-in-charge, fibres of Nylon material average pile height 4mm+/- 0.5mm with eco backing of class 2, heavy commercial use, sanitized, anti-microbial treatment (MRSA) with resilient waterproof backing, anti allergic certified by British allergy foundation, anti static, thickness 4.00mm and approximate weight of 500gm/sqm. The reaction to fire should be as per EN 13501-1: Bfl-s1. Shade as approved by client and installed by approved applicator of manufacturer. Carpet should be fixed by adhesive approved by carpet manufacturer. Carpet should be laid as closure to each other. Contractor will care for level matching with other area flooring. Scope includes Modular Carpet Tiles of Vito Floor or equivalent make material, labour, under lay material, disposal of debris, necessary cutting of carpet without damaging the edges to protect and cleaning etc., Complete. All works are to be carried as per detail drawing and instruction of Engineer-in-charge. Before laying carpet contractor shall prepare even surface up to 3mm. Cost of self leveling compound if required will be provided by the agencies and included in the scope of work. | 65 | Sqm | |
| 9 | 8 | Manufacturing, providing and placing in position machine made factory assembled Cubical Partition of make Rockworth or equivalent of STEEL CASE/HAWORTH/GODREJ INTERIO make (as\nper finally approved sample by department) of following dimensions with the following specifications.Providing and placing pf Frame Work, Partition and Cable management : Frame work shall consist of main spine and return spine of aluminium extruded section of minimum thickness of 1.2 mm. The overall thinkness of Panel base System should be 60- 70 mm. The panel will be hollow inside to accommodate wiring for electrical/data and outer frame of panel should be made of extruded aluminium.The panel shall be made up of 3 mm thick MDF both sides of the wooden frame to create the hollow for the wire management.Finishes of panel above the worktop: Above the top fabric pinup with raceway on main spine between workstation. The hollow panel made of MDF and 3mm thick foam which is upholstered with 0.5mm thick fabric with half fabric pinup + half glass marker board. The thickness of partition panel should be 60-70 mm for main spine. Finishes of panel below the worktop: Below the top the hollow panel should be made of MDF tile and 0.5mm thick steel sheet pasted on MDF which is powder coated with EPC finish 80-90 microns for durability on the inside as well on the outside. The thickness of partition panel should be 60-70 mm for main spine \nThe panel outer aluminium frame is designed such a way that it can be easily slide in to the columns/ Connectors by means of stacking one over the other.Horizontal race way should be 150-170 mm height aluminium profile. There shall be complete cable management arrangement with openable raceway below worktop with provision for fitting electrical/data switches and holes for passing cable. | 15 | Sqm | |
| 10 | 9.1 | Providing & Placing sofa, Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and applying anti- termite paint of approved brand & manufacture to ensure stability of the frame, On the wooden base frame of the sofa to be provided with M.S. helical spring, sides & back with jute strips, with polyfill covered with jute & finished with thick marking cloth before doing final finished with leathrite have basic cost not less than 1000/- Pet Mt. Seat - 40-45Kg/cum density PU Foam, 100mm thick, Back - 35-40Kg/cum density PU foam, 60mm thick, Sides (inside) - 40-45 Kg/cum density PU Foam, 45 mm thick Sides (outside) & back (back side) - 35-40 Kgcum density PU foam, 25mm thick. Seat shall rest on SS square frame of size 25mm x 25mm supported solid wooden section of height 225mm. All SS work should be in grade 304. Base of sofa should be infilled with suitable woode sections so as to give proper support to the seat. Height of the base of sofa shall be 200- 250mm(approx). Finished width of arm shall be 100mm after upholstery work. Sofa to be fully upholstered using approved leatherite of A grade of desired shade duly embossed including providing & fixing of all other related materials including hardwares etc. complete as directed by the Engineer in charge. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality 3 Seater Sofa | 1 | Each | |
| 11 | 9.2 | Providing & Placing sofa, Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and applying anti- termite paint of approved brand & manufacture to ensure stability of the frame, On the wooden base frame of the sofa to be provided with M.S. helical spring, sides & back with jute strips, with polyfill covered with jute & finished with thick marking cloth before doing final finished with leathrite have basic cost not less than 1000/- Pet Mt. Seat - 40-45Kg/cum density PU Foam, 100mm thick, Back - 35-40Kg/cum density PU foam, 60mm thick, Sides (inside) - 40-45 Kg/cum density PU Foam, 45 mm thick Sides (outside) & back (back side) - 35-40 Kgcum density PU foam, 25mm thick. Seat shall rest on SS square frame of size 25mm x 25mm supported solid wooden section of height 225mm. All SS work should be in grade 304. Base of sofa should be infilled with suitable woode sections so as to give proper support to the seat. Height of the base of sofa shall be 200- 250mm(approx). Finished width of arm shall be 100mm after upholstery work. Sofa to be fully upholstered using approved leatherite of A grade of desired shade duly embossed including providing & fixing of all other related materials including hardwares etc. complete as directed by the Engineer in charge. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality1 Seater Sofa | 2 | Each | |
| 12 | 10.1 | Centre & Corner Table : Manufacturing, providing and Placing Centre & Corner Table Set of M/s Rockworth make Soft Seating or equivalent series of STEEL CASE/HAWORTH/GODREJ INTERIO(as per the sample finally approved by the department). Providing and fixing tables of Centre table Size - 1200mm W x 600mm D x 365-400mm H for whose top is made of Particle board wood Grade E-1(Environmental Friendly), thickness 25mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992).The understructure is made of SS CHROME BASE. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality . | 1 | Each | |
| 13 | 10.2 | Centre & Corner Table : Manufacturing, providing and Placing Centre & Corner Table Set of M/s Rockworth make Soft Seating or equivalent series of STEEL CASE/HAWORTH/GODREJ INTERIO(as per the sample finally approved by the department). Providing and fixing tables of Side table Size - 600mm W x 600mm D x 365-400mm H for whose top is made of Particle board wood Grade E-1(Environmental Friendly), thickness 25mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992).The understructure is made of SS CHROME BASE. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality . | 2 | Each | |
| 14 | 11 | Providing and fixing 12mm thick toughened glass of make Saint Gobin or equivalent with edge polishing on all sides in requirement shape and size in partition including making holes, cutouts, filling the gaos with silicon sealant for fixing of patch fittings etc. all complete as per existing site and directions or Engineer Incharge. (Patch fittings to be paid seperatily) | 15 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
