Repairing The Damaged Portions Of Wall Plastering. Providing External Plaster Of 12 Mm To 20Mm Thick And Match With Existing Surfaces With Cement Mortar 1:4 ( One Cement And Four Sand ) As Per Existing Design / Pattern And Thickness With Near Finish-Rajasthan

Repairing The Damaged Portions Of Wall Plastering. Providing External Plaster Of 12 Mm To 20Mm Thick And Match With Existing Surfaces With Cement Mortar 1:4 ( One Cement And Four Sand ) As Per Existing Design / Pattern And Thickness With Near Finish, In Patches To Match With The Adjoining Surfaces Including Carefully Chipping And Breaking The Existing Damaged Plaster At All Levels And Floors And Carting Away The Debris, Curing, Necessary Scaffolding Etc. Complete As Directed Areas To Be Jointly Assessed Before Take Up The Work. Vendor Is Strictly Advised To Visit And Assess The Quantum Of Work Specially For This Item. Chipping Of Unsound / Weak Concrete Material 75Mm Average Thickness From Slabs, Beams, Columns Etc. With Manual Chisel And / Or By Standard Power Driven Percussion Type Or Of Approved Make Including Tapering Of All Edges, Making Square Shoulders Of Cavities Including Cleaning The Exposed Concrete Surface And Reinforcement With Wire Brushes Etc. And Disposal Of Debris For All Lead And Lifts All Complete As Per Direction Of Engineerincharge Chipping Of Weak Concrete Material Of 50Mm Average Thickness From Slab Beam Column With Making Square Shoulders Of Cavities Reinforcement With Wire Brushes As Per Engineer Direction Chipping Of Unsound / Weak Concrete Material Of 25Mm Average Thickness From Slabs, Beams, Columns Etc. With Manual Chisel And / Or By Standard Power Driven Percussion Type Or Of Approved Make Including Tapering Of All Edges, Making Square Shoulders Of Cavities Including Cleaning The Exposed Concrete Surface And Reinforcement With Wire Brushes Etc. And Disposal Of Debris For All Lead And Lifts All Complete As Per Direction Of Engineerincharge Reinforcement Cleaning Of Reinforcement Of All Size From Rust From The Reinforcing Bars To Give It A Total Rust Free Steel Surface By Using Alkaline Chemical Rust Remover Cum Passivator Of Approved Make With Paint Brush And Removing Loose Particles After 24 Hours Of Its Application With Wi

Refer document

Refer document

Refer document