

Name of Work: uxj fuxe t;iqj gSfjVst ds v/khu fofHkUu LFkkuks ij uohu cksfjax fuekZ.k@ejEer dk dk;ZA ¼Okkf"kZd nj lafonk½ | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 200 mm dia Nominal bore. | 1100 | Mtr. | |
2 | 2 | Construction of tube-well from ground levels and upto 100 Meter depth and above to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water). 200 mm dia Nominal bore. | 770 | Mtr. | |
3 | 3 | Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. | 60 | Hr. | |
4 | 4 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. 200 mm dia | 720 | Mtr. | |
5 | 5 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. 200 mm dia | 144 | Mtr. | |
6 | 6 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size: 200 mm dia | 15 | Each | |
7 | 7 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. | 30 | Each | |
8 | 8 | Providing & lowering of G.I. Pipes, flange pipe including rubber washer and nuts of 8 mm dia complete in all respect I.S.I. Make. B Class 50mm dia | 1500 | Mtr. | |
9 | 9 | Installation of submersible motor pump set in tube-well/open well complete (labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose. | 15 | Each | |
10 | 10 | P & L of PVC insulated submersible cable confirming to IS 694 with flexible copper conductor including making connection etc as required 4.00 sqm m 3 core. | 1800 | Mtr. | |
11 | 11 | Providing P.V.C. insulated & P.V.C. sheathed cable of 1.1 kg grade with aluminum conductor of IS : 1554 P-1 of group –II of approved make in ground as per IS ; 1255 including excavation of 30cm x 75cm size trench 25mm thick under layer of sand IInd class bricks covering refilling earth compaction of earth making necessary connection testing etc. as required of size 6.0 sqm mm 4 core. | 461 | Mtr. | |
12 | 12 | Providing and fixing gun metal non return valve of approved quality (screwed end) 50mm nominal bore Horizontal | 15 | Each | |
13 | 13 | Providing and fixing gun metal gate valve I C.I. wheel of approved quality (screwed end) 25mm nominal bore. | 15 | Each |
Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail