Repair Work Of Tikkamal Road Of Municipal Corporation Jaipur Heritage , Sumangalam Community Center Located At Kishpole Bazar . , Jaipur-Rajasthan

TDR : 26129011

Tender Notice
BOQ

Expired

Jaipur , Rajasthan

Tender Brief : Repair Work Of Tikkamal Road Of Municipal Corporation Jaipur Heritage , Sumangalam Community Center Located At Kishpole Bazar .

Document Fees
₹ 500 /-

EMD
₹ 40760.0 /-

Tender Value
₹ 20.38 Lakhs /-

Submission Date
10-12-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: uxj fuxe t;iqj gSfjVst ds fVDdey dk jkLrk] fd'kuiksy cktkj esa fLFkr lqeaxye~ lkeqnkf;d dsUnz dh ejEer dk dk;ZA
1	1	Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.
2	2	Cement Concrete Grade M-15 and above and PCC blocks.	24	Cum
3	3	Lime Concrete, cement concrete grade M-10 (1:5:10) and below	16	Cum
4	4	Carriage of Materials by mechanical transport including loading, unloading and stacking :: Stone, boulders, gravelly material upto lead 10KM.	40	Cum
5	5	Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.	16	Cum
6	6	Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction,expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. PCC M-20	24	Cum
7	7	40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush. White sand stone.	48	Sqm
8	8	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size).	6	Cum
9	9	Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand	6.75	Cum
10	10	1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).	8	Cum
11	11	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)	10	Cum
12	12	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank	2000	Ltr
13	13	Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.	500	Kg
14	14	Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in : 24.5.1 Cement mortar 1:6 (1 cement : 6 coarse sand)	13.8	Cum
15	15	Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories.Cement mortar 1:4 (1 cement :4 coarse sand)	60	Sqm
16	16	Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Green / Black 1501 Cm2 to 3600 Cm2 Tiles	6	Sqm
17	17	Extra for Mirror polishing on marble work where ever required to give high gloss finish complete.	480	Sqm
18	18	Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work	10	Mtr
19	19	Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laidon bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the the cost of cement plaster on wall and pillar) Size 600mm x 600mm	50	Sqm
20	20	Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm inwalls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).	50	Sqm
21	21	Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A'30 mm thickDecorative teak veneer One side	7.095	Sqm
22	22	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm	6	Each
23	23	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm	6	Each
24	24	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm	6	Each
25	25	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm	6	Each
26	26	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.	6	Each
27	27	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:	250	Kg
28	28	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces	12	Sqm
29	29	Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm	60	Sqm
30	30	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer	50	Kg
31	31	Providing and fixing GI wire gauge of average width of aperture 1.56mm with wire of 0.45mm to existing steel door, window shutter frames with necessary M.S. strip beading 20x3mm with suitable screw at not exceeding 150mm distance etc. complete	288	Sqm
32	32	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase	60	Mtr
33	33	Add or deduct for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.	120	Mtr
34	34	Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand)	150	Sqm
35	35	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.	3250	Sqm
36	36	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete	1651.5	Sqm
37	37	Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).	1650	Sqm
38	38	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer.	1620	Sqm
39	39	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work	360	Sqm
40	40	Lettering with black Japan paint of approved brand and manufacture	1000	Per letter\nper cm\nheight
41	41	Precast terrazo tiles 22mm thick with graded marble chips of size upto 12mm laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade using white cement.	160	Sqm
42	42	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore	20	Rmt
43	43	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - 25 mm dia. nominal bore	20	Rmt
44	44	Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall.15MM DIA NOMINAL BORE	20	Rmt
45	45	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)15 mm nominal bore	4	Each
46	46	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)25 mm nominal bore	4	Each
47	47	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore	2	Each
48	48	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore.	6	Each
49	49	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore	2	Each
50	50	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x 450 mm with a pair of 15mm C.P. brass pillar taps.	2	Each
51	51	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.	1	Each
52	52	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.	1	Each
53	53	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore.	2	Each
54	54	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern.	4	Each
55	55	Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore	2	Each
56	56	Wiring of light point /fan point/exhaust fan point/ cell point with 1.5 sqmm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sqmm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit & its accessories, round tiles 18 SWG M.S. box with earth terminal screwlees cage connectors for neutral looping in switch board & false ceiling point, 6A switch. 3,0mm thick phenolic laminated sheet zinc plated/brass screws cup washers making connections, testing etc. as required (Group-1)
57	57	(A)short point upto 3 mtr.	10	P. Point
58	58	(B) Medium Point upto 6 mtr.	10	P. Point
59	59	(C) Long point (up to 10 mtr..)	10	P. Point
60	60	Wiring of 3 pin 5 amp. light plug point with 1.5 sqmm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sqmm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit & its accessories, 18 SWG M.S. box with earth terminal screwlees cage connectors for neutral looping in switch board & false ceiling point, 6A switch. 6A socket, 3,0mm thick phenolic laminated sheet zinc plated/brass screws cup washers making connections, testing etc. as required (Group-1) on board	5	Each
61	61	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor I/ sl marked (IS:694) of 1.1 KV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required, (Gr.1)
62	62	(a) 1 x 1.5 sq.mm	10	P.rm
63	63	(b) 1 x 2.5 sq.mm	10	P.rm
64	64	P/F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D/ tripping characteristic) ISI marked IS: 8828 (1996) conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required : single pole MCB & Neutral MCB 6A to 32A rating (Gr.1)	1	Each
65	65	P/F 240/415 V Isolator confirming to IS:13947-III/IEC 60947-3 on existing board/ sheets including making connections with lugs testing etc. as required double pole lsolators 30A /40A rating (Gr.1)	1	Each
66	66	P&F recessed/surface mounting heavy duty horizontal type sheet steel distribution board phpphatised/powder painted complete with 100A copper bus, shorting link, neutral link, earth link and din bar, conforming to IS:13032& IS: 8623 including making intemal DB terminations with copper plugs, testing etc. (Gr.1) (a) Single door (three phase) 4 way	1	Each
67	67	P&F Strip type fluorescent tube fittings fabricated from (CRCA sheet and finished with powder coating/stove enameled paint) (extruded non corrosive UV resist EP channel) complete with accessories like (OCCB, starter, starter seat)/EB rotor holder, terminal block duly prewired with copper conductor including making connection testing etc. as required (without tube)1X36 watt with OCCB (Group-1)	10	Each
68	68	P&F fluorescent tube rod in existing fixture as required: Fluorescent powder coated 36/40 watt (Gr.1)	10	Each
69	69	P&F of Heavy duty capacitor start 900/ 1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 380 mm sweep (900/ 1400 RPM)	6	Each
70	70	Installation of submersible motor pump set in tube-well/open well complete (labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose.	1	Each
71	71	P & L of PVC insulated submersible cable confirming to IS 694 with flexible copper conductor including making connection etc as required 4.00 sqm m 3 core.	10	Mtr.
72	72	Providing and fixing gun metal gate valve I C.I. wheel of approved quality (screwed end) 25mm nominal bore	1	Each
73	73	P & F IP-65 protected street light luminaire on existing bracket suitable for HPSV/ MH LAMP, made out from powder coated single piece die cast aluminium housing, electrochemically brightened and anodized POT optics aluminium reflector, heat resistant and toughened glass cover and accessories like copper ballast, electronic ignitor, capacitor, holder prewired up to terminal block etc. as required including making connection testing etc. as required (without lamp) 1 X 70 Watt	1	Each
74	74	P & F High pressure sodium vapour/High pressure mercury vapour/ Metal halide/ Halogen lamp as required.HPSV tubular lamp normal output 70 Watt	4	Each
75	75	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, balconies, etc.	60	Sqm
76	76	Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.	50	kg
77	77	Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm.	160	Sqm
78	78	Kota stone slab flooring 25mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) Area of each slab 900 to 2000 sqcm	100	Sqm
79	79	P&F double ball bearing capacitor start ceilling fan of approved make complete with regulator and other accessories as required 1200mm sweep	6	Each
80	80	Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With bricks.	2	Each
81	81	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment.	200	Sqm
82	82	110 mm dia U-PVC pipes with rubber ring (working pressure 6 kg / cm^2) as per IS: 4985	30	Mtr.
83	83	Providing and fixing in position collapsible steel shutters with rticalchannels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.	5.75	SQM

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Road Construction Tenders

Road Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Repair Work Of Tikkamal Road Of Municipal Corporation Jaipur Heritage , Sumangalam Community Center Located At Kishpole Bazar . , Jaipur-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Name of Work: uxj fuxe t;iqj gSfjVst ds fVDdey dk jkLrk] fd'kuiksy cktkj esa fLFkr lqeaxye~ lkeqnkf;d dsUnz dh ejEer dk dk;ZA
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.
2	2	Cement Concrete Grade M-15 and above and PCC blocks.		24	Cum
3	3	Lime Concrete, cement concrete grade M-10 (1:5:10) and below		16	Cum
4	4	Carriage of Materials by mechanical transport including loading, unloading and stacking :: Stone, boulders, gravelly material upto lead 10KM.		40	Cum
5	5	Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.		16	Cum
6	6	Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction,expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. PCC M-20		24	Cum
7	7	40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush. White sand stone.		48	Sqm
8	8	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size).		6	Cum
9	9	Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand		6.75	Cum
10	10	1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).		8	Cum
11	11	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)		10	Cum
12	12	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank		2000	Ltr
13	13	Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.		500	Kg
14	14	Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in : 24.5.1 Cement mortar 1:6 (1 cement : 6 coarse sand)		13.8	Cum
15	15	Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories.Cement mortar 1:4 (1 cement :4 coarse sand)		60	Sqm
16	16	Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Green / Black 1501 Cm2 to 3600 Cm2 Tiles		6	Sqm
17	17	Extra for Mirror polishing on marble work where ever required to give high gloss finish complete.		480	Sqm
18	18	Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work		10	Mtr
19	19	Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laidon bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the the cost of cement plaster on wall and pillar) Size 600mm x 600mm		50	Sqm
20	20	Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm inwalls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).		50	Sqm
21	21	Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A'30 mm thickDecorative teak veneer One side		7.095	Sqm
22	22	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm		6	Each
23	23	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm		6	Each
24	24	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm		6	Each
25	25	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm		6	Each
26	26	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.		6	Each
27	27	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:		250	Kg
28	28	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces		12	Sqm
29	29	Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm		60	Sqm
30	30	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer		50	Kg
31	31	Providing and fixing GI wire gauge of average width of aperture 1.56mm with wire of 0.45mm to existing steel door, window shutter frames with necessary M.S. strip beading 20x3mm with suitable screw at not exceeding 150mm distance etc. complete		288	Sqm
32	32	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase		60	Mtr
33	33	Add or deduct for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.		120	Mtr
34	34	Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand)		150	Sqm
35	35	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.		3250	Sqm
36	36	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete		1651.5	Sqm
37	37	Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).		1650	Sqm
38	38	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer.		1620	Sqm
39	39	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work		360	Sqm
40	40	Lettering with black Japan paint of approved brand and manufacture		1000	Per letter\nper cm\nheight
41	41	Precast terrazo tiles 22mm thick with graded marble chips of size upto 12mm laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade using white cement.		160	Sqm
42	42	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore		20	Rmt
43	43	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - 25 mm dia. nominal bore		20	Rmt
44	44	Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall.15MM DIA NOMINAL BORE		20	Rmt
45	45	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)15 mm nominal bore		4	Each
46	46	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)25 mm nominal bore		4	Each
47	47	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore		2	Each
48	48	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore.		6	Each
49	49	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore		2	Each
50	50	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x 450 mm with a pair of 15mm C.P. brass pillar taps.		2	Each
51	51	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.		1	Each
52	52	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.		1	Each
53	53	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore.		2	Each
54	54	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern.		4	Each
55	55	Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore		2	Each
56	56	Wiring of light point /fan point/exhaust fan point/ cell point with 1.5 sqmm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sqmm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit & its accessories, round tiles 18 SWG M.S. box with earth terminal screwlees cage connectors for neutral looping in switch board & false ceiling point, 6A switch. 3,0mm thick phenolic laminated sheet zinc plated/brass screws cup washers making connections, testing etc. as required (Group-1)
57	57	(A)short point upto 3 mtr.		10	P. Point
58	58	(B) Medium Point upto 6 mtr.		10	P. Point
59	59	(C) Long point (up to 10 mtr..)		10	P. Point
60	60	Wiring of 3 pin 5 amp. light plug point with 1.5 sqmm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sqmm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit & its accessories, 18 SWG M.S. box with earth terminal screwlees cage connectors for neutral looping in switch board & false ceiling point, 6A switch. 6A socket, 3,0mm thick phenolic laminated sheet zinc plated/brass screws cup washers making connections, testing etc. as required (Group-1) on board		5	Each
61	61	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor I/ sl marked (IS:694) of 1.1 KV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required, (Gr.1)
62	62	(a) 1 x 1.5 sq.mm		10	P.rm
63	63	(b) 1 x 2.5 sq.mm		10	P.rm
64	64	P/F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D/ tripping characteristic) ISI marked IS: 8828 (1996) conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required : single pole MCB & Neutral MCB 6A to 32A rating (Gr.1)		1	Each
65	65	P/F 240/415 V Isolator confirming to IS:13947-III/IEC 60947-3 on existing board/ sheets including making connections with lugs testing etc. as required double pole lsolators 30A /40A rating (Gr.1)		1	Each
66	66	P&F recessed/surface mounting heavy duty horizontal type sheet steel distribution board phpphatised/powder painted complete with 100A copper bus, shorting link, neutral link, earth link and din bar, conforming to IS:13032& IS: 8623 including making intemal DB terminations with copper plugs, testing etc. (Gr.1) (a) Single door (three phase) 4 way		1	Each
67	67	P&F Strip type fluorescent tube fittings fabricated from (CRCA sheet and finished with powder coating/stove enameled paint) (extruded non corrosive UV resist EP channel) complete with accessories like (OCCB, starter, starter seat)/EB rotor holder, terminal block duly prewired with copper conductor including making connection testing etc. as required (without tube)1X36 watt with OCCB (Group-1)		10	Each
68	68	P&F fluorescent tube rod in existing fixture as required: Fluorescent powder coated 36/40 watt (Gr.1)		10	Each
69	69	P&F of Heavy duty capacitor start 900/ 1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 380 mm sweep (900/ 1400 RPM)		6	Each
70	70	Installation of submersible motor pump set in tube-well/open well complete (labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose.		1	Each
71	71	P & L of PVC insulated submersible cable confirming to IS 694 with flexible copper conductor including making connection etc as required 4.00 sqm m 3 core.		10	Mtr.
72	72	Providing and fixing gun metal gate valve I C.I. wheel of approved quality (screwed end) 25mm nominal bore		1	Each
73	73	P & F IP-65 protected street light luminaire on existing bracket suitable for HPSV/ MH LAMP, made out from powder coated single piece die cast aluminium housing, electrochemically brightened and anodized POT optics aluminium reflector, heat resistant and toughened glass cover and accessories like copper ballast, electronic ignitor, capacitor, holder prewired up to terminal block etc. as required including making connection testing etc. as required (without lamp) 1 X 70 Watt		1	Each
74	74	P & F High pressure sodium vapour/High pressure mercury vapour/ Metal halide/ Halogen lamp as required.HPSV tubular lamp normal output 70 Watt		4	Each
75	75	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, balconies, etc.		60	Sqm
76	76	Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.		50	kg
77	77	Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm.		160	Sqm
78	78	Kota stone slab flooring 25mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) Area of each slab 900 to 2000 sqcm		100	Sqm
79	79	P&F double ball bearing capacitor start ceilling fan of approved make complete with regulator and other accessories as required 1200mm sweep		6	Each
80	80	Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With bricks.		2	Each
81	81	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment.		200	Sqm
82	82	110 mm dia U-PVC pipes with rubber ring (working pressure 6 kg / cm^2) as per IS: 4985		30	Mtr.
83	83	Providing and fixing in position collapsible steel shutters with rticalchannels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.		5.75	SQM

Repair Work Of Tikkamal Road Of Municipal Corporation Jaipur Heritage , Sumangalam Community Center Located At Kishpole Bazar . , Jaipur-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us