Military Engineer Services-MES has published Nit-26 Comprehensive Maint Of Md Accn At North BankUnder Ge ( South ) Akhnoor . . Submission Date for this Tender is 21-12-2020. Mechanical engineering Service Tenders in GE SOUTH AKHNOOR Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Dec-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-12-2020 |
| Name of Work: COMPREHENSIVE MAINT OF MD ACCN AT NORTH BANK UNDER GE (SOUTH) AKHNOOR. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SCHEDULE 'A' PART-I : BOQ OF WORKS FOR B/R WORKS. | |||
| 2 | 1.01 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), ncluding cleaning, removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed by Engineer-In-Charge. | 7.75 | Cum | |
| 3 | 1.02 | Plain cement concrete M-10(1:3:6), type C-2 (using 40mm graded crushed stone aggregate), 75mm thick, as in plinth protection, finish even and smooth without using extra cement, complete all as specified and as directed by Engineer-In-Charge. | 50 | Sqm | |
| 4 | 1.03 | Plain cement concrete M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregate), nominal mix, 40mm thick, as in floors, finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-In-Charge. | 100 | Sqm | |
| 5 | 1.04 | Glass dividing strips, 3.0mm thick and 38mm wide, as in flooring, complete all as specified and as directed by Engineer-In-Charge. | 80 | Per Running Metre | |
| 6 | 1.05 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engineer-In-Charge. | 545 | Sqm | |
| 7 | 1.06 | Non-skid, coloured, ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Per Square Metre but not exceeding 0.18 Per Square Metre, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including laid over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge. | 110 | Sqm | |
| 8 | 1.07 | Glazed ceramic tiles in vertical surface/ dado, size 300x200x6/7mm thick, 300x450x6/7mm or 400x400x6/7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/ colour of tiles including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed. | 225 | Sqm | |
| 9 | 1.08 | Chequered cement concrete coloured tiles, glossy finish, size 300mmx300mmx20/25mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over 20mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge. | 210 | Sqm | |
| 10 | 1.09 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each, complete all as specified and as directed by Engineer-In-Charge. | 35 | Each | |
| 11 | 1.1 | Taking down shutters of any descriptions area exceeding 1.00 Sqm but not exceeding 2.00 Sqm,complete all as specified and as directed by Engineer-In-Charge. | 30 | Per Leaf | |
| 12 | 1.11 | Taking down shutters of any descriptions, area exceeding 1.00 Sqm but not exceeding 2.00 Sqm and re-fixing in the same openning, complete all as specified and as directed by Engineer-In-Charge. | 15 | Per Leaf | |
| 13 | 1.12 | Second class hardwood in small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles not exceeding 200 Cucm each, complete all as specified and directed by Engineer-In-Charge. | 18 | Each | |
| 14 | 1.13 | Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing, including making good to disturbed surface of walls, complete all as specified and as directed by Engineer-In-Charge. | 141.9 | Per Running Metre | |
| 15 | 1.14 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing in SSR, complete all as specified and as directed by Engineer-In-Charge. | 46.5 | Sqm | |
| 16 | 1.15 | Factory made, plain framed, paneled shutter (two panel) 35mm thick, 2nd class hardwood with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed by Engineer-In-Charge. | 17.5 | Sqm | |
| 17 | 1.16 | Glazed and skeleton shutters in second class hardwood, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed by Engineer-In-Charge. | 35.1 | Sqm | |
| 18 | 1.17 | Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engineer-In-Charge. | 26.5 | Sqm | |
| 19 | 1.18 | Butt hinges, size 100mm, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed by Engineer-In-Charge. | 105 | Each | |
| 20 | 1.19 | Butt hinges, size 50mm, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed by Engineer-In-Charge. | 18 | Each | |
| 21 | 1.2 | Aluminium anodised, barrel tower bolts of extruded Section, size 150mm long and fixed, complete all as specified and as directed by Engineer-In-Charge. | 70 | Each | |
| 22 | 1.21 | Aluminium handles, cast type, anodised, size 150mm, complete all as specified and as directed by Engineer-In-Charge. | 70 | Each | |
| 23 | 1.22 | Mild steel spring for doors, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed by Engineer-In-Charge. | 20 | Each | |
| 24 | 1.23 | Mild steel pressed handles, size 150mm, oval type, stove enamelled black, complete all as specified and as directed by Engineer-In-Charge. | 60 | Each | |
| 25 | 1.24 | Mild steel barrel tower bolts, size 200mm, stove enamelled black, with bright bolt and fixed, complete all as specified and as directed by Engineer-In-Charge. | 60 | Each | |
| 26 | 1.25 | Securing glass of any description in existing wooden/metal frames glazed with putty/ beads including\nremoving loose or decayed putty/ beads, painting/ oiling one coat on rebates, grooves, reputtying and painting/ oiling puttied surface to match existing work (new length\nof frame reputtied shall be measured), complete all as specified and as directed by Engineer-In-Charge. | 210 | Per Running Metre | |
| 27 | 1.26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed by Engineer-In-Charge. | 180 | Sqm | |
| 28 | 1.27 | Sheet glass, 3.0mm thick, ordinary quality and glazing with oil putty or with wooden beadings, fixing in square not exceeding 0.50Sqm in each pane, complete all as specified and as directed by Engineer-In-Charge. | 170 | Sqm | |
| 29 | 1.28 | Sheet glass, 4.0mm thick, figured glass, pin head type and glazing with oil putty in squares area not exceeding 0.50 Sqm in each pane, complete all as specified and as directed by Engineer-In-Charge. | 10 | Sqm | |
| 30 | 1.29 | Taking up or down steel tubing of 15mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge. | 80 | Per Running Metre | |
| 31 | 1.3 | Taking up or down steel tubing of 20mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge. | 60 | Per Running Metre | |
| 32 | 1.31 | Tubes, 'medium grade' galvanised, 15mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.\nNote: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates. | 65 | Per Running Metre | |
| 33 | 1.32 | Tubes, 'medium grade' galvanised, 20mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.\nNote: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates. | 50 | Per Running Metre | |
| 34 | 1.33 | Old tubes, 'any grade' galvanised, 15mm bore, with all new fittings such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-In-Charge.\nNote: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates. | 15 | Per Running Metre | |
| 35 | 1.34 | Old tubes, 'any grade' galvanised, 20mm bore, with all new fittings such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-In-Charge.\nNote: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates. | 10 | Per Running Metre | |
| 36 | 1.35 | Bib taps, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 30 | Each | |
| 37 | 1.36 | Bib taps, long body, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 10 | Each | |
| 38 | 1.37 | Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, fixed in repairs, complete all as specified and as directed by Engineer-In-Charge. | 25 | Each | |
| 39 | 1.38 | Stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, fixed in repairs, complete all as specified and as directed by Engineer-In-Charge. | 10 | Each | |
| 40 | 1.39 | Angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, fixed in repairs, complete all as specified and as directed by Engineer-In-Charge. | 20 | Each | |
| 41 | 1.4 | Centre hole basin mixer, chromium plated, with round sport without pop up waste system for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 8 | Each | |
| 42 | 1.41 | Centre hole wall mixer, chromium plated, with round sport without pop up waste system for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 10 | Each | |
| 43 | 1.42 | PVC connections 15mm size with brass nuts of length 450mm, complete all as specified and as directed by Engineer-In-Charge. | 70 | Each | |
| 44 | 1.43 | PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, capacity 10.0 litres and making good to dismantled/ damaged floor/ surfaces, fixing in repair, complete all as specified and as directed by Engineer-In-Charge. | 25 | Each | |
| 45 | 1.44 | Vitreous China squatting pan, ‘Orissa’ pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to dismantled floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), fixing in repair, complete all as specified and as directed by Engineer-In-Charge. | 15 | Each | |
| 46 | 1.45 | Vitreous China wash hand basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32mm dia, waste coupling of PTMT (half or full threaded), fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 5 | Each | |
| 47 | 1.46 | Brass chromium plated shower rose 125mm size, fancy type, fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 20 | Each | |
| 48 | 1.47 | PVC waste pipe, 32mm bore with cup washers, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 40 | Each | |
| 49 | 1.48 | PVC waste pipe, 40mm bore with cup washers, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 25 | Each | |
| 50 | 1.49 | Rotational moulded polyethylene water storage tanks of 500 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 35 | Each | |
| 51 | 1.5 | Rotational moulded polyethylene water storage tanks of 1000 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 15 | Each | |
| 52 | 1.51 | Plate rack (kitchen stand) stainless steel, size 760x910x230mm, thickness of stainless steel sheet not less than 0.80mm, weight not less than 8.00Kg each, fixing by means of electrical drill machine, fasteners and screws, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 12 | Each | |
| 53 | 1.52 | Bevelled edge mirror, size 600mmx450mm, selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 25 | Each | |
| 54 | 1.53 | Marble work 18 to 20mm thick (table rubbed and polished), green colour, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and as directed by Engineer-In-Charge. | 5 | Per Square Metre | |
| 55 | 1.54 | Dismantling of old/ damaged existing roof treatment with concrete and cleaning all waste and dirt by wire mesh, picking, sweeping and washing down with water to remove dust, etc, and removal of all material out side the cant area, complete all as specified and as directed by Engineer-In-Charge. | 615 | Sqm | |
| 56 | 1.55 | Waste coupling of PTMT (half or full threaded) for 32mm bore/ dia of discharge pipe, complete all as specified and as directed by Engineer-In-Charge. | 25 | Each | |
| 57 | 1.56 | PVC (SWR) floor trap of 75mm dia outlet, plain with grating including jointing with solvent cement, complete all as specified and as directed by Engineer-In-Charge. | 15 | Each | |
| 58 | 1.57 | Applying one coat of neat cement slurry with 3.0 Kg of cement per Sqm on cleaned surfaces of roof, evenly, complete all as specified and as directed by Engineer-In-Charge. | 615 | Sqm | |
| 59 | 1.58 | Rendering 10mm thick on fair faces of brick work or concrete surfaces, in cement mortar 1:4, including mixing water proofing compound @ 3% by weight in cement, rendering is to be finished even and smooth (without using extra lime or cement), complete all as specified and as directed by Engineer-In-Charge.\nNote: Cost of water proofing compound shall deemed included in quoted rates. | 615 | Sqm | |
| 60 | 1.59 | Water proof treatment on roof top with APP (Ataxic Poly Propylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density polyethylene film, minimum weight not less than 3.0 Kg/ Sqm, 2.0mm thick, centre core is sandwiched on both sides by high quality polymeric mix with properties of high softening point, high heat resistance and cold resistivity to make it ideal for all water proofing treatment, with polymeric mix protection on both sides with 20 micron HMHDPE film, laid over one coat of bituminous primer conforming to IS: 3384, applied @0.40 Kg/ Sqm and one coat of hot blown bitumen of 85/25 grade, conforming to IS:702, applied @1.20Kg/ Sqm on prepared surfaces of roof, overlap should be not less than 150mm at ends and 75mm at sides, joints and overlaps uniformly bounded with LPG torch flame including applying of one coat of semi hot blown bitumen of 85/25 grade, @1.20 Kg Sqm and fine screened sand in dry condition @0.50 Kg/ Sqm after laying the membrane, complete all as specified and as directed by Engineer-In-Charge. | 615 | Sqm | |
| 61 | 1.6 | Precast machine pressed factory made PCC tiles, size 300x300mm and 20mm thick, with grey cement and no pigment, pointed in cement mortar 1:3 and laid over 15mm thick bedding layer in cement mortar 1:4 mixed with creosote oil @5% by weight of cement, complete all as specified and as directed by Engineer-In-Charge. | 615 | Sqm | |
| 62 | 1.61 | Flush pointing, to 30cm by 15cm brick tiles of bricks, laid flat in pavings, in cement mortar 1:3, complete all as specified and as directed by Engineer-In-Charge. | 10 | Sqm | |
| 63 | 1.62 | Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified. | 5 | Cum | |
| 64 | 1.63 | Brickwork with subclass ‘B’ bricks, old size bricks, straight or curved on plan exceeding 6.0mtrs mean radius built in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge. | 5 | Cum | |
| 65 | 1.64 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified. | 800 | Sqm | |
| 66 | 1.65 | Rendering 15mm thick on bricks or concrete masonry surfaces, on walls, in cement mortar 1:6, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed. | 650 | Sqm | |
| 67 | 1.66 | Rendering 5mm thick on any type of surfaces, on ceiling, in cement mortar 1:3, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed. | 75 | Sqm | |
| 68 | 1.67 | Rendering 15mm thick on bricks or concrete masonry surfaces, on walls, in cement mortar 1:4, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed. | 75 | Sqm | |
| 69 | 1.68 | Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement paint over one coat lime wash, complete all as specified and as directed. | 75 | Sqm | |
| 70 | 1.69 | Preparation of old/ decorated plastered or unplastered surfaces of walls and applying one coat of cement paint, complete all as specified and as directed. | 405 | Sqm | |
| 71 | 1.7 | Preparation of new/ old plastered surfaces of walls and applying wall care putty, 3.0mm thick, as preparation of surfaces and making surfaces even and smooth including applying applying two coats of distemper oil emulsion over one coat of primer, complete all as specified and as directed by Engineer-In-Charge.\nNote: Colour shall be approved by GE. | 650 | Sqm | |
| 72 | 1.71 | Preparation of old plastered or unplastered surfaces of walls and applying one coats of distemper oil emulsion after preparing of surfaces, complete all as specified and as directed. | 650 | Sqm | |
| 73 | 1.72 | Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white washing, complete all as specified and as directed. | 75 | Sqm | |
| 74 | 1.73 | Preparation of old/ decorated plastered or unplastered surfaces of ceiling and applying one coat of white (Lime) washing, complete all as specified and as directed. | 405 | Sqm | |
| 75 | 1.74 | Ball valves, PVC, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 50 | Each | |
| 76 | 1.75 | Water storage tank lid, PVC lid , suitable for rotational moulded polyethylene water storage tanks of 500/ 1000 liters capacity, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 42 | Each | |
| 77 | 1.76 | PVC (SWR) pipes, 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, fixed on wall with mild steel/ PVC clamps, fixing in repairs,complete all as specified. | 105 | Per Running Metre | |
| 78 | 1.77 | PVC (SWR) bends of 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, any radius, fixing with adhesive, complete all as specified and as directed. | 8 | Each | |
| 79 | 1.78 | Preparation of new or previously untreated wood or wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed. | 102 | Sqm | |
| 80 | 1.79 | Preparation of old painted wood/ wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. | 155 | Sqm | |
| 81 | 1.8 | Preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying one coat of synthetic enamel paint, complete all as specified and as directed. | 100 | Sqm | |
| 82 | 2 | Amount of Schedule of credit of for Rs 63,570.00 shall be deducted from quoted amount. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
