Development Of New A Site Kisan Seva Kendra Between Birauli Chowk And Tara Chowk On Birauli- Kalyanpur Road At Madhopur Bhual, Block- Kalyanpur, Dist- Samastipur, Bihar Under Begusarai Divisional Office Of Bihar State Office, Biraualidistsamastipur-Bihar

TDR : 26122599

Tender Notice
BOQ

Expired

Biraualidistsamastipur , Bihar

Tender Brief : Development Of New A Site Kisan Seva Kendra Between Birauli Chowk And Tara Chowk On Birauli- Kalyanpur Road At Madhopur Bhual, Block- Kalyanpur, Dist- Samastipur, Bihar Under Begusarai Divisional Office Of Bihar State Office

Document Fees
Refer document

EMD
₹ 51000.0 /-

Tender Value
Refer document

Submission Date
07-12-2020

Competition Type
Indian

Bidding Type
Auction

Need a Business Loan? Apply Now !

Name of Work: Development of new A site Kisan Seva Kendra between Birauli chowk and Tara Chowk on Birauli- Kalyanpur Road at Madhopur Bhual, Block- Kalyanpur, Dist- Samastipur, Bihar under Begusarai Divisional Office of Bihar State Office
1	1	New KSK at Madhopur Bhual: Civil Works	b1
2	2	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600	b2
3	3	i) All kinds of Soil	b3	133	M3
4	4	Extra for levelling & neatly dressing of disposed soil completely as directed by engineer in charge	b4	50	M3
5	5	Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil	b5	20	M3
6	6	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m	b6	45	M3
7	7	Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete.	b7
8	8	i) Local Fine Sand within grading zone IV	b8	27	M3
9	9	Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level:	b9
10	10	iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)	b10	6	M3
11	11	v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)	b11	7	M3
12	12	Centering and shuttering including strutting, propping etc. and removal of form work for:	b12
13	13	i) Foundations,footings,bases of column	b13	36	M2
14	14	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level	b14
15	15	ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm	b15	7	M3
16	16	Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement :	b16
17	17	ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm	b17	4	M3
18	18	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size)	b18	11	M3
19	19	Providing and laying RCC work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).	b19	1	M3
20	20	Centering and shuttering including strutting, propping etc. and removal of form for :	b20
21	21	i) Foundations,footings,bases of columns, etc. for mass concrete	b21	15	M2
22	22	v) Columns, Pillars, Piers, Abutments, Posts and Struts.	b22	42	M2
23	23	vii) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards	b23	26	M2
24	24	viii) Suspended floors, roofs,landings balconies and access platform with water proof ply 12mm thick	b24	48	M2
25	25	ix) Lintels, beams, plinth beams, girders, bressumers cantilevers and with water proof ply 12mm thick	b25	19	M2
26	26	Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels	b26
27	27	ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786	b27	1600	KG
28	28	Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth	b28
29	29	ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH	b29	25	M3
30	30	iv) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL	b30	14	M3
31	31	x) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement:4 coarse sand in superstructure ABOVE PLINTH level & UP TO FLOOR V LEVEL	b31	17	M2
32	32	Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks	b32	26	M2
33	33	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels.	b33
34	34	iv) Granite of any colour and shade having Area of slab over 0.50 sqm	b34	3	M2
35	35	Providing & fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.including priming coat with approved steel primer (fixed to steel windows by welding) all complete.	b35	85	KG
36	36	Providing & fixing chrome plated brass100mm mortise latch with one dead bolt with 6 levers & a pair of lever handles with necessary screws etc. complete (best make of approved quality).	b36	1	EA
37	37	Providing & fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete :	b37
38	38	i) 250x10 mm	b38	2	EA
39	39	ii) 200x10 mm	b39	8	EA
40	40	Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete :	b40
41	41	i) 125 mm	b41	10	EA
42	42	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover	b42	20	M2
43	43	Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in- charge.(area of grill to be measured).	b43	6	M2
44	44	Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement	b44	30	M2
45	45	Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.	b45	45	M2
46	46	Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete.	b46	8	M2
47	47	Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified	b47
48	48	i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4	b48	9	M2
49	49	iii) Skirting with size of Tiles 60x60Cm in Cement mortar 1:3	b49	7	M2
50	50	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.	b50
51	51	ii) 110 mm diameter	b51	15	M
52	52	Providing and laying cement plaster on surfaces with Coarse sand including curing etc.	b52
53	53	ii) 12mm Cement plaster of mix 1:6 (1 cement: 6 coarse sand)	b53	149	M2
54	54	Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc.	b54
55	55	i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand)	b55	75	M2
56	56	Providing Neat cement punning	b56	10	M2
57	57	Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete	b57	190	M2
58	58	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :	b58	110	M2
59	59	Finishing walls with Acrylic Smooth exterior paint of required shade (2 or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior Primer applied @ 2.20kg/10 sqm)	b59	100	M2
60	60	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats	b60	120	M2
61	61	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture.	b61	70	M2
62	62	Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plant at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface & compacting with vibratory power roller to achieve the desired density, complete as per specification & direction of Engineer-in-charge.	b62
63	63	iii) With material confirming to grade-III (size 26.5 mm to .075 mm) having CBR value -20, Thickness as desired	b63	108	M3
64	64	Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge	b64	113	M3
65	65	i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern	b65	1	EA
66	66	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :	b66
67	67	ii) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap	b67	4	EA
68	68	Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan)with seat lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.	b68	4	EA
69	69	Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.	b69	4	EA
70	70	Providing & fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete	b70
71	71	iii) With Flexible pipe of 32 mm dia	b71	4	EA
72	72	Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.	b72	4	EA
73	73	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall	b73
74	74	i) 15 mm nominal outer dia Pipes	b74	20	M
75	75	ii) 20 mm nominal outer dia Pipes	b75	25	M
76	76	iii) 25 mm nominal outer dia Pipes	b76	25	M
77	77	v) 40 mm nominal outer dia Pipes	b77	65	M
78	78	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.	b78
79	79	ii) 20 mm nominal outer dia Pipes	b79	25	M
80	80	iii) 25 mm nominal outer dia Pipes	b80	32	M
81	81	Providing and fixing B class G.I. pipes complete with G.I. fittings & clamps, i/c cutting & making good the walls etc. Internal work Exposed on wall.	b81
82	82	i) 15 mm nominal outer dia Pipes	b82	20	M
83	83	Providing and fixing brass bib cock of approved quality :	b83
84	84	i) 15 mm nominal bore	b84	4	EA
85	85	Providing and fixing brass stop cock of approved quality :	b85
86	86	i) 15 mm nominal bore	b86	4	EA
87	87	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :	b87
88	88	i) 25 mm nominal bore	b88	2	EA
89	89	iii) 40 mm nominal bore	b89	1	EA
90	90	Constructing masonry Chamber 30x30x50 cm, inside, in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with CI surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S (non modular) bricks of class designation 7.5	b90	4	EA
91	91	Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank	b91	1000	L
92	92	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty	b92
93	93	ii) 150 mm dia. R.C.C. pipe	b93	28	M
94	94	Providing and laying non-pressure NP3 class (Medium class) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.complete	b94
95	95	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5	b95	1	EA
96	96	Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M 25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with, bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by Crawler, mounted, Telescopic Boom Hydraulic pilling Rig all complete. including removal of excavated earth with all lifts & leads (Length of pile for payment shall be measured upto bottom of pile cap). Truck mounted rotary/TMR/Tubewell boring machine shall not be used	b96
97	97	i) 300 mm dia piles	b97	2	M
98	98	Extra over item for Single under ream pile for providing additional bulb in under reamed piles, under specified dia meter (Only the quantity of extra bulbs are to be paid)	b98
99	99	i) 300 mm dia piles	b99	2	EA
100	100	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately)	b100
101	101	i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections	b101	100	KG
102	102	iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)	b102	80	KG
103	103	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):	b103
104	104	ii) With float glass panes of 5.0 mm thickness (weight not less than 12.5kg/sqm)	b104	20	M2
105	105	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.	b105
106	106	i) With stainless steel cover plate	b106	1	EA
107	107	Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge.	b107
108	108	i) Powder coated minimum thickness 50 micron aluminium tubular handle bar	b108	2	EA
109	109	Boring/drilling bore well of required dia for casing/ strainer pipe by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge,	b109
110	110	iv) 300mm dia in all types of soil up to 90m depth below ground	b110	70	M
111	111	Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium well casing (CM) pipe of required dia,conforming to IS:12818, including required hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.	b111
112	112	i) 100 mm nominal size dia	b112	45	M
113	113	ii) 150 mm nominal size dia	b113	20	M
114	114	Supply and packing Gravel in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.	b114	1	M3
115	115	Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:	b115
116	116	i) 100 mm dia	b116	1	EA
117	117	Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete	b117
118	118	i) 100 mm dia clamp	b118	1	EA
119	119	Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).	b119
120	120	i) 100 mm dia	b120	1	EA
121	121	Providing & laying factory made reflective type Lacquered finish Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately)	b121
122	122	ii) M40 grade 80 mm thick reflective type Lacquered finish	b122	500	M2
123	123	CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items	b123
124	124	iv) 3 Core x 2.5 sq. mm Copper Cable FRLS	b124	10	M
125	125	xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS	b125	65	M
126	126	SUPPLY AND LAYING OF FLAT CABLES	b126
127	127	i) 3core, 2.5 sq.mm copper Flat Cable for submersible pump	b127	70	M
128	128	Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil	b128
129	129	ii) 200mm x 50mm x 2mm	b129	10	M
130	130	Providing, fixing, testing and commissioning of FLP junction box of approved make for cable connection/ jointing.	b130
131	131	i) For cables 2.5 to 4 sqmm XLPE / AYFY	b131	1	EA
132	132	Providing & fixing flexible copper cable PVC insulated of 16sqmm for connecting the earth grid/earth strip with the crocodile clip i/c cost of 1 no. crocodile clip (for tanker earthing & other job)	b132	2	EA
133	133	i) Electrical insulating mats made of PVC Elastomer 3mm Thick & 1 mtr wide near swichboards, etc as per direction of Engineer In charge. Mat should conform to IS 15652 Class A - suitable for safe working voltage of upto 33 kV. Test certificate to be provided with supply. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip.	b133	2	M2
134	134	ii) 6 mm thick chequered plate on cable trench inside swtich room, DG room, earthing pit including cutting, painting, lifting hooks, etc	b134	2	M2
135	135	iii) Supply and fixing of shock treatment chart in English, Hindi & local language framed in glass framework.	b135	1	EA
136	136	ii) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.	b136	25	EA
137	137	Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make	b137
138	138	ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire	b138	35	M
139	139	Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc.	b139
140	140	ii) Upto 32A DP MCB	b140	5	EA
141	141	Supply and installation of MCB distribution board having Double door complete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. without incoming isolator and MCBs	b141
142	142	ii) 2+8 way SPN	b142	1	EA
143	143	Supplying & fixing of approved make 4 pole change over switch in steel sheet enclosure with side handle operation onload type grouting in C.C. Complete as per direction of Engineer-In-Charge.	b143
144	144	ii) 63 Amps., 4 Pole	b144	1	EA
145	145	CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type:	b145
146	146	iii) 1200 mm sweep	b146	2	EA
147	147	EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan).	b147
148	148	ii) 9\" dia light duty, make Khaitan or equivalent	b148	2	EA
149	149	SUBMERSIBLE PUMP Supply,erection,testing & Commissioning of foll.submersible water pump with starter panel board, non return valve, gate valve etc. complete.	b149
150	150	ii) 33 LPM 100m head	b150	1	EA
151	151	Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watts with fittings and accessories, having IP65 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc.	b151	6	EA
152	152	S/F of 09 Watt LED Bulb	b152	15	EA
153	153	Supplying and fixing of 10mm thick mirror polished black granite tiles for pump island edges etc. over 12mm thick CM 1:4 including cost of all materials and labour etc. complete.	b153	2	M2
154	154	S/F OF ACP SHEET IN ALUM - DOORS	b154	7	SQM
155	155	S/F TOWEL RAIL	b155	4	EA
156	156	S/F SOAP TRAY	b156	4	EA
157	157	HEALTH FAUCET & JET SPRAYS WITH 02 WAY BIB COCK IN TOILET	b157	4	EA
158	158	Supply and Installation of Flame Proof ESD Push Button	b158	2	EA
159	159	Supplying & Fixing of FRP Septic Tank of minimum capacity 1000 Litre	b159	1	EA
160	160	New KSK at Madhopur Bhual: P&M Works	b160
161	161	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600	b161
162	162	i) All kinds of Soil	b162	5	M3
163	163	Extra for levelling & neatly dressing of disposed soil completely as directed by engineer in charge	b163	7	M3
164	164	Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete.	b164
165	165	i) Local Fine Sand within grading zone IV	b165	1	M3
166	166	Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level:	b166
167	167	iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)	b167	2	M3
168	168	v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)	b168	5	M3
169	169	Centering and shuttering including strutting, propping etc. and removal of form work for:	b169
170	170	i) Foundations,footings,bases of column	b170	9	M2
171	171	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level	b171
172	172	ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm	b172	3	M3
173	173	Centering and shuttering including strutting, propping etc. and removal of form for :	b173
174	174	i) Foundations,footings,bases of columns, etc. for mass concrete	b174	8	M2
175	175	Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels	b175
176	176	ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786	b176	60	KG
177	177	Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth	b177
178	178	ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH	b178	9	M3
179	179	Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks	b179	2	M2
180	180	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels.	b180
181	181	iv) Granite of any colour and shade having Area of slab over 0.50 sqm	b181	13	M2
182	182	Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:	b182	500	KG
183	183	Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete.	b183
184	184	i) Hot finished welded type tubes	b184	150	KG
185	185	Providing and laying cement plaster on surfaces with Coarse sand including curing etc.	b185
186	186	ii) 12mm Cement plaster of mix 1:6 (1 cement: 6 coarse sand)	b186	10	M2
187	187	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :	b187	5	M2
188	188	Finishing walls with water proofing cement paint of required shade with Two or more coats applied @ 3.84 kg/10 sqm:	b188	5	M2
189	189	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture.	b189	10	M2
190	190	Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5	b190	1	EA
191	191	Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole including painting / doping with Shalimastic HD as applicable as per specifications complete. RCC works wherever mentioned shall be of grade M20	b191
192	192	ii) In earth pit with RCC matt raft as per standard Drg. ENG/314	b192	2	LS
193	193	Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping	b193
194	194	ii) S/L Threaded U/G HD MS Pipes of 80 mm dia with fittings,doping	b194	8	M
195	195	iv) S/L Threaded U/G HD MS Pipes of 40 mm dia with fittings,doping	b195	2	M
196	196	Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL Specifications including pipeline fittings like bends, tee etc as required and as directed for Above Ground pipeline including surface preparation according to standard SSPC ST2 and painting with 2 coats of red oxide zinc phosphate primer and 2 coats of Synthetic enamel / aluminium finish paint as per IOCL specifications	b196
197	197	ii) S/L Threaded A/G HD MS Pipes of 80 mm dia with fittings,Painting	b197	1	M
198	198	iv) S/L Threaded A/G HD MS Pipes of 40 mm dia with fittings,Painting	b198	12	M
199	199	Supply, fabrication, laying and testing of MS black, ERW welded, pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping	b199
200	200	iii) S/L Welded U/G HD MS Pipes of 50mm dia with fittings,doping	b200	70	M
201	201	Supply and installation of screwed type gun metal valves as per IOC specifications: Gate Valve	b201
202	202	i) S/I Screwed type GM Angular Check Valve of 50 mm dia	b202	4	EA
203	203	Supply and installation of ‘U’ type CS bend on the vent pipes including painting as per specifications and supplying and brazing wire mesh of 11 mesh per linear centi-meter of non-corrosive metal in two layers on both ends.	b203
204	204	iii) Supply & installation of U type CS bend on vent pipe of 40 mm dia	b204	1	EA
205	205	INSTALLATION OF SD/HD DISPENSING PUMPS (MONO /DUAL) Installation of supplied standard duty/heavy duty dispensing pump on existing pump island as per IOCL's drawings and instructions including supplying /filling required quantity of dry sand in the pit(s) below the pump	b205
206	206	i) Installation of DU Including providing necessary anchor bolts and C.C. foundation	b206	2	EA
207	207	Air compressor Supply and installation of horizontal air compressor assembly with delivery pressure of 12 kg/sq cm equipped with pressure gauge, non- return/safety/drain/delivery valves, automatic cut-off switch and suitable electrical connections & all standard accessories, including civil works:	b207
208	208	i) Horizontal air compressor Assembly of 2 HP (100-160 LITRES) including civil works	b208	1	EA
209	209	Tyre Inflator Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LED displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar (Excluding civil work for foundation,etc.)	b209	1	EA
210	210	Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor)	b210
211	211	iii) 15/20 KL Tank with fittings : 0 - 30 Km	b211	2	LS
212	212	iv) 15/20 KL Tank with fittings: Add extra for each addtnl. Km above 30km	b212	300	KM
213	213	viii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos,0-30 Km	b213	1	LS
214	214	ix) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos, Add extra for every additional Km above 30km	b214	150	KM
215	215	Replacing existing manhole gaskets for 15/20/50/70 KL U/G & A/G tanks including disconnecting the pipelines, removing nuts, bolts & manhole cover and supplying and fixing permanite oil gaskets, nuts & bolts and reconnecting the pipeline.	b215	4	LS
216	216	Supply and fixing Pressure Vacuum Valves of 2 inches for fixing to the Vent Pipes of Underground MS tanks. The valve should be in closed position at normal operating pressure of the tank. The Valve shall be capable for activation at set pressure of 3\" ± 0.5 water column to release excess pressure of tank to the atmosphere and open at vacuum of 8\" ± 2.0 water column to induce the atmosphere pressure to the tank. PV valve should be diaphragm of dead weight or spring loaded type or combination of any. The weight of the PV valve shall not exceed 2.0 kg. top of the valve shall be provided with cover/cap/ weather hood to prevent the entry of rain water. Valve material,Cover and adopter shall be of Aluminium/polypropylene, diaphragm if used should be of Neoprene, O ring should be of rubber/neoprene, Net/Mesh Pressure puppet ,Vacuum puppet,screws and spring should be of stainless steel. Suitable adopter with one end fitted with valve and the other end should have threading for fixing on Vent pipe of 40mm. PV valves shall have: UL 842 certification of CARB approval or test certificate from any Govt.lab. PV valve shall have PESO approval.	b216	1	EA
217	217	CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items	b217
218	218	iv) 3 Core x 2.5 sq. mm Copper Cable FRLS	b218	245	M
219	219	FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Baliga/CEAG-FCG /Flexpro/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.	b219
220	220	vi) 3 Core x 1.5 sq. mm.	b220	4	EA
221	221	vii) 3 Core x 2.5 sq. mm	b221	16	EA
222	222	PROVISION OF EARTHING	b222
223	223	ii) Providing earthing with 80 mm dia,3.0 M long GI (Heavy duty) perforated pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drwng. etc. all complete as per specif. & direction of Engineer-In-charge	b223	2	EA
224	224	Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :	b224
225	225	iii) 50 x 6 mm G.I. Strip	b225	200	M
226	226	ii) 32 x 6 mm G.I.strip	b226	25	M
227	227	v) 25 x 3 mm GI strip	b227	70	M
228	228	vii) 10 S.W.G. G.I. Wire (bare)	b228	2	M
229	229	Supplying and providing 100mm square hensel weather proof junction box for emblem pole/ light pole/yard light	b229	2	EA
230	230	PANEL BOARDS AND DISTRIBUTION BOARDS Supply, installation, testing and commissioning of cubicle type power and motor control centre panel fabricated out of 14 SWG sheet steel undergone 7 tank process,dust & vermin proof, floor mounting type, suitable for indoor use having cable entry from the bottom and having following specific components complete, control wiring etc. as per enclosed standard drawing. Any other components/hardware required to complete the panels but not mentioned here shall also be provided. Note: Both incomers should have mechanical interlock for proper & safe operation. The MCCB used for incomer feeder shall have short circuit, overload and earthfault protection and also shunt coil for ESD operation. The Bus Bar support shall be DMC/ SMC/Epoxy moulded. All equipment/components shall be mounted logically to have free access for maintenance, tightening of connections & visual inspection. All the metering equipment shall be Digital & mounted on the panel and size of meter shall be 96 mm x 96 mm. The Bus Bar shall be provided with heat shrunk PVC sleeves & all power terminals shall be stud type with properly shrouding to avoid accidental contact. Neoprene type gasket shall be provided at the doorof the panel. The enclosure of the Panel shall have IP52 degree of protection. 2 Nos earth terminal shall be provided at the Panel frame with extension link for earthing connections. Painting:The under surface shall be prepared by applying a coat of phosphate paint and coat of yellow zinc chromate primer. The under surface shall be made free from all imperfections before undertaking the finishing coat. After preparation of the under surface, the switchboard shall be spray painted with two coats of epoxy based final paint or shall be powder coated. Colour shade of final paint shall be RAL 7032.	b230
231	231	Kisaan Seva Kendra, Standard drawing No. ENG/IOCL/PDIL-3. List of Componets are: (a) 1 No. MCCB (3P+N) of 63 A, 25 KA with O/L, E/F & S/C Releases for incomer from Electricity Board (b) AC Digital Voltmeter (0-500V) with built in selector switch for incomer from Electricty Board (c) AC Digital Ammeter (0-60A) with built in selector switch for incomer from Electricity Board (d) 1 No. FP, On Load, 63 A, Manually Operated Change over switch suitable for connection of Mains supply and 10 KVA DG Set /5 KW Solar system with required No. of MCCB (63 A ,25 KA, 3P+N) for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with Indicating lamps. (e) 1 No. MCCB (3P+N) of 63A, 25 KA with UV coil O/L , E/F & S/C Releases for incomer from Electricity Board/DG Set/ Solar Supply & 1 No 6A , SP, Control MCB with 3 Nos LED Type (RYB) Indicating lamps (f) 3 Nos 60/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (g) 1 No DP MCB of 40 A, 10 KA for supply of essential loads (h) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (i) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as outgoings for essential loads (j) 415 V, TP & N, 100 A, Al Bus Bar (k) 4 Nos MCB (3P+N) of 40 A,10 KA for supply of outgoing feeders 1-4 (l) 6 Nos DP MCB of 10 A, 10 KA in Outgoing Feeder -1 (m) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-2 (n) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-3 (o) 6 Nos TP MCB of 16 A, 10 KA in outgoing Feeder-4 (p) Provision for Termination of Solar Power (Up to 10 KW) Incomer to Essential DB in Panel as per requirement of IOCL.	b231	1	EA
232	232	Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge.	b232
233	233	i) \"Y\" Pole	b233	2	EA
234	234	OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separatly) :	b234
235	235	iii) S/E of 5 Meter high galvanised Octagonal pole with top 60mm(A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 210 x 210 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides)	b235	2	EA
236	236	Supply & fixing of following items in Electronic Register Assembly of dispensing pumps (Make:L&T / MIDCO / Tatsuno / Nouvopignone) as applicable:	b236
237	237	i) 6V, 10AH dry rechargeable battery	b237	2	EA
238	238	DISPENSING PUMP CONNECTIONS	b238
239	239	ii) Providing dispensing pump power circuit connection with copper conductor single core PVC sheathed wire as per recommendations of the pump manufacturer (make of pumps: L&T /MIDCO /AVERY / Tatsuno/ Nouvopignone)	b239	2	EA
240	240	Supply and fixing of 100 W LED (Light Emitting Diode) light fixture with fittings and accessories for Yard lighting purpose having IP66 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc.	b240	4	EA
241	241	Supply & Fixing of Earthing Clip Box of Size 200x300x400 mm for keeping crocodile clip	b241	2	EA

Also Visit

Tenders

Bihar Tenders

Construction Tenders

Road Construction Tenders

Road Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Development Of New A Site Kisan Seva Kendra Between Birauli Chowk And Tara Chowk On Birauli- Kalyanpur Road At Madhopur Bhual, Block- Kalyanpur, Dist- Samastipur, Bihar Under Begusarai Divisional Office Of Bihar State Office, Biraualidistsamastipur-Bihar

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Development Of New A Site Kisan Seva Kendra Between Birauli Chowk And Tara Chowk On Birauli- Kalyanpur Road At Madhopur Bhual, Block- Kalyanpur, Dist- Samastipur, Bihar Under Begusarai Divisional Office Of Bihar State Office, Biraualidistsamastipur-Bihar

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us