Tender For Soil Stabilization By Pressure Grouting And Additional Repair Jobs In Supply And Distribution Block At Polymer Terminal Ppmc Iocl As Detailed In Tender Document . , Panipat-Haryana
TDR : 26115575
Tender Notice
Corrigendum Details
BOQ
Expired
Panipat
Haryana
Corrigendum : Tender For Soil Stabilization By Pressure Grouting And Additional Repair Jobs In Supply And Distribution Block At Polymer Terminal Ppmc Iocl As Detailed In Tender Document .
Name of Work:Tender for Soil stabilization by pressure grouting and additional repair jobs in Supply and Distribution block at Polymer Terminal, PPMC, IOCL
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Detailed BOQ
2
1.01
Dismantling old plaster or skirting raking out joints and\ncleaning the surface for plaster including disposal of rubbish to\nthe dumping ground within 50 metres lead.\n
823
Sqm
3
1.02
Providing and injecting approved grout in proportion\nrecommended by the manufacturer into cracks/ honey-comb\narea of concrete/ masonry by suitable gun/ pump at required\npressure including cutting of nipples after curing etc. complete\nas per directions of engineer-in-charge. (The payment shall be\nmade on the basis of actual weight of approved grout\ninjection). \n\nEpoxy injection grout in concrete/ RCC work of approved make
221.333
kilogram
4
1.03
Providing & Fixing of Chicken Wire Mesh
200
Per bag\nof 50 kg\ncement\nused in\nthe mix.\n
5
1.04
Steel reinforcement for R.C.C. work including straightening,\ncutting, bending, placing in position and binding all complete\nup to plinth level.\n\nThermo-Mechanically Treated bars.
1830
Sqm
6
1.05
15 mm cement plaster on the rough side of single or half brick\nwall of mix :\n1:4 (1 cement: 4 fine sand)
200
kg
7
1.06
Water proofing materials
167.244
Sqm
8
1.07
Extra for providing and mixing water proofing material in\ncement plaster work in proportion recommended by the\nmanufacturers.\nNote: The unit KG is to be read as each for the quantity of\nwater proofing materail consumed in a bag of cement of 50 kg.\n
643
Sqm
9
1.08
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:\nOne or more coats on old work
823
cum
10
1.09
White cement based putty
448
Nos
11
1.1
12 mm cement plaster finished with a floating coat of neat\ncement of mix :\n1:4 (1 cement: 4 fine sand)
623
cum
12
1.11
Dismantling tile work in floors and roofs laid in cement mortar\nincluding stacking material within 50 metres lead.\nFor thickness of tiles 10 mm to 25 mm
150
Sqm
13
1.12
Demolishing cement concrete manually/ by mechanical means\nincluding disposal of material within 50 metres lead as per\ndirection of Engineer - in - charge.\nNominal concrete 1:3:6 or richer mix (i/c equivalent design\nmix)\n
30
Sqm
14
1.13
Making bore upto 6 feet depth and placing the 3 side open casing and doing soil stailization with pressure grouting using the fosroc chemical 1000mm c/c\nBore 100mm dia and 6 feet depth
100
cum
15
1.14
Providing and laying in position cement concrete of specified\ngrade excluding the cost of centring and shuttering - All work\nup to plinth level :\n1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate\n20 mm nominal size).\n
22.5
Nos
16
1.15
Providing and laying rectified Glazed Ceramic floor tiles\n300x300 mm or more (thickness to be specified by the\nmanufacturer) of 1st quality conforming to IS : 15622 of\napproved make in colours White, Ivory, Grey, Fume Red\nBrown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4\nCoarse sand) including grouting the joints with white cement\nand matching pigments etc., complete.\n
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.