

Name of Work: Raze & Rebuild of M/s. Black Diamond Refill Centre, 9th Mile, Jorabat, Dist. Ri-Bhoi, Meghalaya. GST applicable will be payable extra. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | DEMOLISHING OF DRIVERS TOILET BLOCK | BI01010001010000000000000515BI0100001112 | ||
2 | 2 | Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge | BI01010001010000000000000515BI0100001113 | 5.166 | M3 |
3 | 3 | Dismantling Steel work in built up sections in angles, tees, flats channels etc. including all gusset plates, bolts nuts, cutting rivets welding etc. including dismembering and stacking within premises | BI01010001010000000000000515BI0100001114 | 231 | KG |
4 | 4 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within premises | BI01010001010000000000000515BI0100001115 | 33.25 | M2 |
5 | 5 | Dismantling roofing including ridges, hips valleys & gutters, False ceiling of any type and stacking the material within premises, of: | BI01010001010000000000000515BI0100001116 | ||
6 | 6 | i) G.S. Sheet/ Klippon galvalume sheet/ False ceiling panels | BI01010001010000000000000515BI0100001117 | 12.375 | M2 |
7 | 7 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within premises. | BI01010001010000000000000515BI0100001118 | ||
8 | 8 | i) Thickness up to 40 mm | BI01010001010000000000000515BI0100001119 | 16.25 | M2 |
9 | 9 | CONSTRUCTION OF TOILET BLOCK & (HOUDA) | BI01010001010000000000000515BI0100001120 | ||
10 | 10 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth | BI01010001010000000000000515BI0100001121 | 6.25 | M2 |
11 | 11 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level | BI01010001010000000000000515BI0100001122 | ||
12 | 12 | ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm | BI01010001010000000000000515BI0100001123 | 0.215 | M3 |
13 | 13 | Centering and shuttering including strutting, propping etc. and removal of form for : | BI01010001010000000000000515BI0100001124 | ||
14 | 14 | iv) Lintels, beams plinth beams,girders bressumers and cantilevers | BI01010001010000000000000515BI0100001125 | 1.725 | M2 |
15 | 15 | Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels | BI01010001010000000000000515BI0100001126 | ||
16 | 16 | ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 | BI01010001010000000000000515BI0100001127 | 65.861 | KG |
17 | 17 | Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth | BI01010001010000000000000515BI0100001128 | ||
18 | 18 | ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH | BI01010001010000000000000515BI0100001129 | 1.083 | M3 |
19 | 19 | viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH | BI01010001010000000000000515BI0100001130 | 28.25 | M2 |
20 | 20 | Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: | BI01010001010000000000000515BI0100001131 | 154.928 | KG |
21 | 21 | Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement | BI01010001010000000000000515BI0100001132 | 15 | M2 |
22 | 22 | Providing and laying cement plaster on surfaces with fine sand including curing etc. | BI01010001010000000000000515BI0100001133 | ||
23 | 23 | i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001134 | 59.92 | M2 |
24 | 24 | Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001135 | 50.5 | M2 |
25 | 25 | Finishing walls with textured exterior paint of required shade (2 or more coats applied @ 3.28 ltr/10 sqm, over and including priming coat of exterior Primer applied @ 2.20kg/10 sqm) | BI01010001010000000000000515BI0100001136 | 50.5 | M2 |
26 | 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. | BI01010001010000000000000515BI0100001137 | 6.72 | M2 |
27 | 27 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins,rafters & trusses & including cutting to size & shape wherever required:- 1.00mm thick G.S. Sheet with zinc coating not less than 275gm/m² | BI01010001010000000000000515BI0100001138 | 8.75 | M2 |
28 | 28 | Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. | BI01010001010000000000000515BI0100001139 | 9.96 | M2 |
29 | 29 | Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. | BI01010001010000000000000515BI0100001140 | 66.419 | M2 |
30 | 30 | Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | BI01010001010000000000000515BI0100001141 | 2 | EA |
31 | 31 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : | BI01010001010000000000000515BI0100001142 | ||
32 | 32 | i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001143 | 3 | EA |
33 | 33 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : | BI01010001010000000000000515BI0100001144 | ||
34 | 34 | i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | BI01010001010000000000000515BI0100001145 | 2 | EA |
35 | 35 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. | BI01010001010000000000000515BI0100001146 | ||
36 | 36 | ii) 110 mm diameter | BI01010001010000000000000515BI0100001147 | 24 | M |
37 | 37 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001148 | 2 | EA |
38 | 38 | Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : | BI01010001010000000000000515BI0100001149 | ||
39 | 39 | i) 100mm inlet & 100mm outlet SCI S&S as per IS - 3989. | BI01010001010000000000000515BI0100001150 | 2 | EA |
40 | 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall | BI01010001010000000000000515BI0100001151 | ||
41 | 41 | i) 15 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001152 | 24 | M |
42 | 42 | ii) 20 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001153 | 30 | M |
43 | 43 | iii) 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001154 | 12 | M |
44 | 44 | Providing and fixing B class G.I. pipes complete with G.I. fittings & clamps, i/c cutting & making good the walls etc. Internal work Exposed on wall. | BI01010001010000000000000515BI0100001155 | ||
45 | 45 | ii) 20 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001156 | 18 | M |
46 | 46 | iii) 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001157 | 12 | M |
47 | 47 | Supply and installation of screwed type gun metal valves as per IOC specifications: Gate Valve | BI01010001010000000000000515BI0100001158 | ||
48 | 48 | ii) S/I Screwed type GM Gate Valve of 40 mm dia. | BI01010001010000000000000515BI0100001159 | 1 | EA |
49 | 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | BI01010001010000000000000515BI0100001160 | 1000 | L |
50 | 50 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms - 15 mm nominal bore. | BI01010001010000000000000515BI0100001161 | 4 | EA |
51 | 51 | Providing and fixing brass stop cock of approved quality : | BI01010001010000000000000515BI0100001162 | ||
52 | 52 | i) 15 mm nominal bore | BI01010001010000000000000515BI0100001163 | 7 | EA |
53 | 53 | CONSTRRUCTION OF SEPTIC TANK AND SOAK PI | BI01010001010000000000000515BI0100001164 | ||
54 | 54 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 | BI01010001010000000000000515BI0100001165 | ||
55 | 55 | i) All kinds of Soil | BI01010001010000000000000515BI0100001166 | 13.6 | M3 |
56 | 56 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth | BI01010001010000000000000515BI0100001167 | 5.629 | M2 |
57 | 57 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level | BI01010001010000000000000515BI0100001168 | ||
58 | 58 | ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm | BI01010001010000000000000515BI0100001169 | 0.666 | M3 |
59 | 59 | Centering and shuttering including strutting, propping etc. and removal of form for : | BI01010001010000000000000515BI0100001170 | ||
60 | 60 | iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) | BI01010001010000000000000515BI0100001171 | 5.226 | M2 |
61 | 61 | Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels | BI01010001010000000000000515BI0100001172 | ||
62 | 62 | ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 | BI01010001010000000000000515BI0100001173 | 76.948 | KG |
63 | 63 | ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH | BI01010001010000000000000515BI0100001174 | 4.078 | M3 |
64 | 64 | Providing and laying cement plaster on surfaces with fine sand including curing etc. | BI01010001010000000000000515BI0100001175 | ||
65 | 65 | i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001176 | 18 | M2 |
66 | 66 | Providing Neat cement punning | BI01010001010000000000000515BI0100001177 | 29.628 | M2 |
67 | 67 | viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH | BI01010001010000000000000515BI0100001178 | 14.644 | M2 |
68 | 68 | ELECTRIFICATION OF DRIVERS TOILET BLOCK | BI01010001010000000000000515BI0100001179 | ||
69 | 69 | PROVIDING INTERNAL WIRING | BI01010001010000000000000515BI0100001180 | ||
70 | 70 | i) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. | BI01010001010000000000000515BI0100001181 | 6 | EA |
71 | 71 | Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete. | BI01010001010000000000000515BI0100001182 | ||
72 | 72 | i) Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. | BI01010001010000000000000515BI0100001183 | 40 | M |
73 | 73 | Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make | BI01010001010000000000000515BI0100001184 | ||
74 | 74 | i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire | BI01010001010000000000000515BI0100001185 | 38 | M |
75 | 75 | ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire | BI01010001010000000000000515BI0100001186 | 30 | M |
76 | 76 | iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire | BI01010001010000000000000515BI0100001187 | 18 | M |
77 | 77 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge. | BI01010001010000000000000515BI0100001188 | ||
78 | 78 | iv) 6 module frame | BI01010001010000000000000515BI0100001189 | 1 | EA |
79 | 79 | viii) 15 A Modular switch | BI01010001010000000000000515BI0100001190 | 6 | EA |
80 | 80 | Supplying & fixing of approved make 4 pole change over switch in steel sheet enclosure with side handle operation onload type grouting in C.C. Complete as per direction of Engineer-In-Charge. | BI01010001010000000000000515BI0100001191 | ||
81 | 81 | iii) 100 Amps., 4 Pole | BI01010001010000000000000515BI0100001192 | 1 | EA |
82 | 82 | MCB DISTRIBUTION BOARD INCLUSIVE OF 3- PHASE MCB Supply & fixing of MCB Distribution Board double door type inclusive of MCB, Three Phase, as per Approved Make of following types: (MCB - 10KA Breaking Capacity) | BI01010001010000000000000515BI0100001193 | ||
83 | 83 | i) S/E 4 way DB with 63A FP RCBO, 300 mA sensitivity as incoming - 1No.& 6 to 16A SP as outgoing - 4 Nos. for each phase. | BI01010001010000000000000515BI0100001194 | 1 | EA |
84 | 84 | Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watts with fittings and accessories, having IP65 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. | BI01010001010000000000000515BI0100001195 | 4 | EA |
85 | 85 | EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan). | BI01010001010000000000000515BI0100001196 | ||
86 | 86 | ii) 9" dia light duty, make Khaitan or equivalent | BI01010001010000000000000515BI0100001197 | 2 | EA |
87 | 87 | CONSTRUCTION OF LADIES TOILET BLOCK | BI01010001010000000000000515BI0100001198 | ||
88 | 88 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 | BI01010001010000000000000515BI0100001199 | ||
89 | 89 | i) All kinds of Soil | BI01010001010000000000000515BI0100001200 | 42.23 | M3 |
90 | 90 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m | BI01010001010000000000000515BI0100001201 | 36.868 | M3 |
91 | 91 | Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. | BI01010001010000000000000515BI0100001202 | ||
92 | 92 | i) Local Fine Sand within grading zone IV | BI01010001010000000000000515BI0100001203 | 12 | M3 |
93 | 93 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth | BI01010001010000000000000515BI0100001204 | 49.525 | M2 |
94 | 94 | Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: | BI01010001010000000000000515BI0100001205 | ||
95 | 95 | iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) | BI01010001010000000000000515BI0100001206 | 1.2 | M3 |
96 | 96 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil | BI01010001010000000000000515BI0100001207 | 5.375 | M2 |
97 | 97 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level | BI01010001010000000000000515BI0100001208 | ||
98 | 98 | ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm | BI01010001010000000000000515BI0100001209 | 8.184 | M3 |
99 | 99 | Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement : | BI01010001010000000000000515BI0100001210 | ||
100 | 100 | ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm | BI01010001010000000000000515BI0100001211 | 7.265 | M3 |
101 | 101 | Centering and shuttering including strutting, propping etc. and removal of form for : | BI01010001010000000000000515BI0100001212 | ||
102 | 102 | i) Foundations,footings,bases of columns, etc. for mass concrete | BI01010001010000000000000515BI0100001213 | 22.26 | M2 |
103 | 103 | v) Columns, Pillars, Piers, Abutments, Posts and Struts. | BI01010001010000000000000515BI0100001214 | 32.22 | M2 |
104 | 104 | iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) | BI01010001010000000000000515BI0100001215 | 32.54 | M2 |
105 | 105 | iv) Lintels, beams plinth beams,girders bressumers and cantilevers | BI01010001010000000000000515BI0100001216 | 15.525 | M2 |
106 | 106 | Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth | BI01010001010000000000000515BI0100001217 | ||
107 | 107 | viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH | BI01010001010000000000000515BI0100001218 | 57.195 | M2 |
108 | 108 | ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH | BI01010001010000000000000515BI0100001219 | 4.347 | M3 |
109 | 109 | Providing and laying cement plaster on surfaces with fine sand including curing etc. | BI01010001010000000000000515BI0100001220 | ||
110 | 110 | i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001221 | 73.1 | M2 |
111 | 111 | Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc. | BI01010001010000000000000515BI0100001222 | ||
112 | 112 | i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand) | BI01010001010000000000000515BI0100001223 | 29.44 | M2 |
113 | 113 | Providing and laying cement plaster on surfaces with fine sand including curing etc. | BI01010001010000000000000515BI0100001224 | ||
114 | 114 | iii) 15mm Cement plaster of mix 1:4 (1 cement: 4 fine sand) on rough side of half or single brick wall | BI01010001010000000000000515BI0100001225 | 44.16 | M2 |
115 | 115 | Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001226 | 146.7 | M2 |
116 | 116 | Finishing walls with textured exterior paint of required shade (2 or more coats applied @ 3.28 ltr/10 sqm, over and including priming coat of exterior Primer applied @ 2.20kg/10 sqm) | BI01010001010000000000000515BI0100001227 | 57.8 | M2 |
117 | 117 | Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm | BI01010001010000000000000515BI0100001228 | 56.5 | M2 |
118 | 118 | Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. | BI01010001010000000000000515BI0100001229 | 16 | M2 |
119 | 119 | Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement | BI01010001010000000000000515BI0100001230 | 8.28 | M2 |
120 | 120 | Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. | BI01010001010000000000000515BI0100001231 | 60.48 | M2 |
121 | 121 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately) | BI01010001010000000000000515BI0100001232 | ||
122 | 122 | iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | BI01010001010000000000000515BI0100001233 | 61.144 | KG |
123 | 123 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as per directions of Engineer in charge | BI01010001010000000000000515BI0100001234 | ||
124 | 124 | i) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | BI01010001010000000000000515BI0100001235 | 6.72 | M2 |
125 | 125 | Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001236 | ||
126 | 126 | ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001237 | 4 | KG |
127 | 127 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001238 | ||
128 | 128 | ii) Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar | BI01010001010000000000000515BI0100001239 | 4 | EA |
129 | 129 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. | BI01010001010000000000000515BI0100001240 | 29.44 | M2 |
130 | 130 | Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | BI01010001010000000000000515BI0100001241 | 2 | EA |
131 | 131 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : | BI01010001010000000000000515BI0100001242 | ||
132 | 132 | i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001243 | 2 | EA |
133 | 133 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : | BI01010001010000000000000515BI0100001244 | ||
134 | 134 | i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | BI01010001010000000000000515BI0100001245 | 2 | EA |
135 | 135 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. | BI01010001010000000000000515BI0100001246 | ||
136 | 136 | ii) 110 mm diameter | BI01010001010000000000000515BI0100001247 | 18 | M |
137 | 137 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001248 | 2 | EA |
138 | 138 | Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : | BI01010001010000000000000515BI0100001249 | ||
139 | 139 | i) 100mm inlet & 100mm outlet SCI S&S as per IS - 3989. | BI01010001010000000000000515BI0100001250 | 4 | EA |
140 | 140 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall | BI01010001010000000000000515BI0100001251 | ||
141 | 141 | i) 15 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001252 | 30 | M |
142 | 142 | ii) 20 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001253 | 25 | M |
143 | 143 | iii) 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001254 | 12 | M |
144 | 144 | Providing and fixing B class G.I. pipes complete with G.I. fittings & clamps, i/c cutting & making good the walls etc. Internal work Exposed on wall. | BI01010001010000000000000515BI0100001255 | ||
145 | 145 | ii) 20 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001256 | 30 | M |
146 | 146 | iii) 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001257 | 12 | M |
147 | 147 | Supply and installation of screwed type gun metal valves as per IOC specifications: Gate Valve | BI01010001010000000000000515BI0100001258 | ||
148 | 148 | ii) S/I Screwed type GM Gate Valve of 40 mm dia. | BI01010001010000000000000515BI0100001259 | 2 | EA |
149 | 149 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | BI01010001010000000000000515BI0100001260 | 1000 | L |
150 | 150 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms - 15 mm nominal bore. | BI01010001010000000000000515BI0100001261 | 4 | EA |
151 | 151 | Providing and fixing brass stop cock of approved quality : | BI01010001010000000000000515BI0100001262 | ||
152 | 152 | i) 15 mm nominal bore | BI01010001010000000000000515BI0100001263 | 4 | EA |
153 | 153 | Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels | BI01010001010000000000000515BI0100001264 | ||
154 | 154 | ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 | BI01010001010000000000000515BI0100001265 | 1622.35 | KG |
155 | 155 | CONSTRUCTION OF SEPTIC TANK & SOAK PIT : | BI01010001010000000000000515BI0100001266 | ||
156 | 156 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 | BI01010001010000000000000515BI0100001267 | ||
157 | 157 | i) All kinds of Soil | BI01010001010000000000000515BI0100001268 | 13.59 | M3 |
158 | 158 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth | BI01010001010000000000000515BI0100001269 | 5.629 | M2 |
159 | 159 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level | BI01010001010000000000000515BI0100001270 | ||
160 | 160 | ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm | BI01010001010000000000000515BI0100001271 | 0.666 | M3 |
161 | 161 | Centering and shuttering including strutting, propping etc. and removal of form for : | BI01010001010000000000000515BI0100001272 | ||
162 | 162 | iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) | BI01010001010000000000000515BI0100001273 | 5.226 | M2 |
163 | 163 | ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 | BI01010001010000000000000515BI0100001274 | 76.948 | KG |
164 | 164 | Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth | BI01010001010000000000000515BI0100001275 | ||
165 | 165 | ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH | BI01010001010000000000000515BI0100001276 | 4.078 | M3 |
166 | 166 | Providing and laying cement plaster on surfaces with fine sand including curing etc. | BI01010001010000000000000515BI0100001277 | ||
167 | 167 | i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001278 | 18.003 | M2 |
168 | 168 | Providing Neat cement punning | BI01010001010000000000000515BI0100001279 | 29.628 | M2 |
169 | 169 | Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth | BI01010001010000000000000515BI0100001280 | ||
170 | 170 | viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH | BI01010001010000000000000515BI0100001281 | 14.644 | M2 |
171 | 171 | ELECTRIFICATION OF LADIES TOILET BLOCK | BI01010001010000000000000515BI0100001282 | ||
172 | 172 | PROVIDING INTERNAL WIRING | BI01010001010000000000000515BI0100001283 | ||
173 | 173 | i) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. | BI01010001010000000000000515BI0100001284 | 12 | EA |
174 | 174 | Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make | BI01010001010000000000000515BI0100001285 | ||
175 | 175 | i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire | BI01010001010000000000000515BI0100001286 | 55 | M |
176 | 176 | ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire | BI01010001010000000000000515BI0100001287 | 45 | M |
177 | 177 | iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire | BI01010001010000000000000515BI0100001288 | 42 | M |
178 | 178 | iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire | BI01010001010000000000000515BI0100001289 | 40 | M |
179 | 179 | SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge. | BI01010001010000000000000515BI0100001290 | ||
180 | 180 | iii) 4 module frame | BI01010001010000000000000515BI0100001291 | 3 | EA |
181 | 181 | viii) 15 A Modular switch | BI01010001010000000000000515BI0100001292 | 12 | EA |
182 | 182 | Supply & fixing of 300mA RCCB of approved Make of following ratings: | BI01010001010000000000000515BI0100001293 | ||
183 | 183 | v) 4 poles, 63A | BI01010001010000000000000515BI0100001294 | 1 | EA |
184 | 184 | Supplying & fixing of approved make 4 pole change over switch in steel sheet enclosure with side handle operation onload type grouting in C.C. Complete as per direction of Engineer-In-Charge. | BI01010001010000000000000515BI0100001295 | ||
185 | 185 | iii) 100 Amps., 4 Pole | BI01010001010000000000000515BI0100001296 | 1 | EA |
186 | 186 | MCB DISTRIBUTION BOARD INCLUSIVE OF 3- PHASE MCB Supply & fixing of MCB Distribution Board double door type inclusive of MCB, Three Phase, as per Approved Make of following types: (MCB - 10KA Breaking Capacity) | BI01010001010000000000000515BI0100001297 | ||
187 | 187 | i) S/E 4 way DB with 63A FP RCBO, 300 mA sensitivity as incoming - 1No.& 6 to 16A SP as outgoing - 4 Nos. for each phase. | BI01010001010000000000000515BI0100001298 | 1 | EA |
188 | 188 | Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watts with fittings and accessories, having IP65 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. | BI01010001010000000000000515BI0100001299 | 4 | EA |
189 | 189 | Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watts with fittings and accessories, having IP20 protection class with CRCA/PC/Aluminium Extrusion housing & with UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer in charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall range from 5700 Kelvin (5665 K +/- 355 K) to 6500 Kelvin, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 80 for indoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 95 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 2kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. | BI01010001010000000000000515BI0100001300 | 4 | EA |
190 | 190 | EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan). | BI01010001010000000000000515BI0100001301 | ||
191 | 191 | ii) 9" dia light duty, make Khaitan or equivalent | BI01010001010000000000000515BI0100001302 | 4 | EA |
192 | 192 | CONSTRUCTION OF PAVER DRIVEWAY & APPROAC | BI01010001010000000000000515BI0100001303 | ||
193 | 193 | Providing & laying factory made reflective type Lacquered finish Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately) | BI01010001010000000000000515BI0100001304 | ||
194 | 194 | ii) M40 grade 80 mm thick reflective type Lacquered finish | BI01010001010000000000000515BI0100001305 | 2123.2 | M2 |
195 | 195 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level | BI01010001010000000000000515BI0100001306 | ||
196 | 196 | ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm | BI01010001010000000000000515BI0100001307 | 13.845 | M3 |
197 | 197 | Centering and shuttering including strutting, propping etc. and removal of form for : | BI01010001010000000000000515BI0100001308 | ||
198 | 198 | i) Foundations,footings,bases of columns, etc. for mass concrete | BI01010001010000000000000515BI0100001309 | 114.6 | M2 |
199 | 199 | Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels | BI01010001010000000000000515BI0100001310 | ||
200 | 200 | ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 | BI01010001010000000000000515BI0100001311 | 1291.2 | KG |
201 | 201 | CONSTRUCTION OF DEEP TUBE WELL :- | BI01010001010000000000000515BI0100001312 | ||
202 | 202 | Boring/drilling bore well of required dia for casing/ strainer pipe by suitable method prescribed in IS: 2800 (part I), including\ncollecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all\nequipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, | BI01010001010000000000000515BI0100001313 | ||
203 | 203 | iv) 300mm dia in all types of soil up to 90m depth below ground | BI01010001010000000000000515BI0100001314 | 90 | M |
204 | 204 | xvi) 300mm dia in all types of soil 90m to 150m depth | BI01010001010000000000000515BI0100001315 | 150 | M |
205 | 205 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium well casing (CM) pipe of required dia,conforming to IS:12818, including required hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge | BI01010001010000000000000515BI0100001316 | ||
206 | 206 | i) 100 mm nominal size dia | BI01010001010000000000000515BI0100001317 | 90 | M |
207 | 207 | Supplying, filling, spreading & levelling gravels of size range 1.5 mm to 2 mm, in the recharge pit, over gravel layer for all leads & lifts, all complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001318 | 1 | M3 |
208 | 208 | Supply and packing Gravel in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001319 | 1 | M3 |
209 | 209 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer in charge. | BI01010001010000000000000515BI0100001320 | 20 | H |
210 | 210 | SUBMERSIBLE PUMP Supply,erection,testing & Commissioning of foll.submersible\nwater pump with starter panel board, non\nreturn valve, gate valve etc. complete. | BI01010001010000000000000515BI0100001321 | ||
211 | 211 | ii) 33 LPM 100m head | BI01010001010000000000000515BI0100001322 | 1 | EA |
212 | 212 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable\nas per requirement, all complete for borewell of: | BI01010001010000000000000515BI0100001323 | ||
213 | 213 | i) 100 mm dia | BI01010001010000000000000515BI0100001324 | 1 | EA |
214 | 214 | Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS: 2800 (part I), including\nnecessary bolts & nuts of required size complete | BI01010001010000000000000515BI0100001325 | ||
215 | 215 | i) 100 mm dia clamp | BI01010001010000000000000515BI0100001326 | 2 | EA |
216 | 216 | Supply and fixing High Density Polymer Water pipe as per IS 4984, PE-63 grade, 10Kg/sqcm rating for borewell including all fittings etc | BI01010001010000000000000515BI0100001327 | ||
217 | 217 | vii) 40mm dia HDPE pipe for borewell upto a depth of 65m | BI01010001010000000000000515BI0100001328 | 70 | M |
218 | 218 | ii) 3core, 4 sq.mm copper Flat Cable for submersible pump | BI01010001010000000000000515BI0100001329 | 120 | M |
Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail