Construction Of Ntphc At Rampora Karewa Anantnag ( Finishing Work ) ( 4Th Fresh ) Finishing Work
Tender Value
33.30 Lakhs
Estimated cost
Bid Submission
10 Dec 2020
0 days left
EMD
66600
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rampora_Karewa_Anantnag → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Ntphc At Rampora Karewa Anantnag ( Finishing Work ) ( 4Th Fresh ) Finishing Work
BOQ
| Name of Work: Construction of NTPHC at Ramora Karawa Anantnag (Finishing Work) Adv. Cost.: Rs. 33.30 Lacs. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class Kail wood including all carriages | BI01010001010000000000000515BI0100001124 | 0.6 | Cum |
| 2 | 2 | Providind and fixing 35 mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows including ISI marked M.S prepared butt hinges bright finished of required size with necessary screws excluding panelling/glazing which will be paid separetely ,all complete including carriages as per direction of engineer-in-charge First class kail wood | BI01010001010000000000000515BI0100001125 | 120 | Sqm |
| 3 | 3 | Providing and fixing 35 m thick wire guaze shutters using galavanised M.S wire guaze of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors,windows and clerestory windows with ISI marked M.S pressed bright finished butt hinges with b necessary screws of required size including carriages complete First class kail wood . | BI01010001010000000000000515BI0100001126 | 50.22 | Sqm |
| 4 | 4 | Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages and cost of materials involved. | BI01010001010000000000000515BI0100001127 | 300 | No |
| 5 | 5 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows(Area of opening for panelled inserts excluding portion inside grroves or rebates to be measured) .Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Pre-laminated particle board with decorative lamination on both sides.Grade I,Type II IS:12823 marked including all carriages. | BI01010001010000000000000515BI0100001128 | 500 | Sft |
| 6 | 6 | Providing and fixing of 4 mm thick ordinary sheet glass pans to windows and ventillator shutters embeded in putty and fixed with beadings including cost of nails etc and carriages complete | BI01010001010000000000000515BI0100001129 | 700 | Sft |
| 7 | 7 | Providing and fixing of Almunium hardware fittings to doors and windows of approved quality (ISI mark) approved by the site Engineer including all carriages. | BI01010001010000000000000515BI0100001130 | ||
| 8 | 7.01 | L-Drop 8''-12\" | BI01010001010000000000000515BI0100001131 | 45 | no |
| 9 | 7.02 | Tower Bolt 4''-6'' | BI01010001010000000000000515BI0100001132 | 300 | no |
| 10 | 7.03 | Handle 4''-6'' | BI01010001010000000000000515BI0100001133 | 150 | no |
| 11 | 8 | Cement concrete flooring 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. Complete. 50 thick with 20mm nominal size stone aggregate(Crushed) including all carriages complete\n | BI01010001010000000000000515BI0100001134 | 26 | Sqm |
| 12 | 9 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to 13:15622of approved make in all colours and shades, laid on 20mmthick cement mortar 1:4 (I cement :4 coarse sand)including grouting the joints with white cement andmatching pigments etc. including all carriages complete\n | BI01010001010000000000000515BI0100001135 | 3500 | Sft |
| 13 | 10 | Providing and fixing Ist qualityCeramic glazed wall tiles confirming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except begundy,bottle green,black of any size as approved by Engineer in charge in skirting ,risers of steps and dados over 12 mm thick cement Mortar 1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade (size of tile as specified by the site Engineer) including all carriages complete\n\n | BI01010001010000000000000515BI0100001136 | 2800 | sft |
| 14 | 11 | Providing and fixing of non-skid ceramic glazed floor tiles 300*300 mm(thickness to be specified by the manufacturers) of 1st quality conforming to IS:13755 of NITCO,ORIENT,SOMANY,KAJARIA,or equivalent make in all colours,such as White,Ivory,Grey,Fume red,Brown sizelaid on 20 mm thick bed of Cement Mortar 1:4 (1 cement:4 coarse sand) and jointed with white cement and matching pigment etc complete including all carriages. | BI01010001010000000000000515BI0100001137 | 1100 | Sft |
| 15 | 12 | Providing and fixing gang saw cut mirror polished 18-20 mm thick marble (premoulded and pre polished), machine cut at different locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels including all carriages complete.\n | BI01010001010000000000000515BI0100001138 | 878 | Sft |
| 16 | 13 | Providing double edge moulding to marble stone including machine polishing to edge to give high gloss finish etc.complete as per design as approved by Engineer-in-Charge | BI01010001010000000000000515BI0100001139 | 248 | Rft |
| 17 | 14 | Providing and applying white cement based putty (Birla or equivalent )of 2mm thickness over plastered surface to prepare the surface even and smooth including all carriages complete\n | BI01010001010000000000000515BI0100001140 | 16365 | Sft |
| 18 | 15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.New work (two or more coats) over and inluding priming coat with cement primer including all carriages.\n\n | BI01010001010000000000000515BI0100001141 | 1522 | Sqm |
| 19 | 16 | Finishing walls with textured exterior paint of required shade on New work(two or more coats applied @3.28 l/10 sqm over and including base coat of water proofing cement paint applied @2.20 kg/10 sqm) (apex or equivalent) including all carriages | BI01010001010000000000000515BI0100001142 | 657 | Sqm |
| 20 | 17 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages.\n\n | BI01010001010000000000000515BI0100001143 | 620 | Sqm |
| 21 | 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages.\n | BI01010001010000000000000515BI0100001144 | 620 | Sqm |
| 22 | 19 | P/F of 50mm dia stainless steel railing of 304 grade of hollow tube 1.6 mm thick of jindal/salem make or equivalent incl:welding and fixing with stainless steel machine screws for making required size and shape,buffing etc. complete and fixing stainless steel balusters upto 900mm height and S S tubes,three in one installed horizontally incl:cutting,welding,grinding to required shape and size by required steel dash fasteners,nuts, bolts,screws etc in floors and treads incl: providing S S shoe at each balusters complete as per archtectural drawings and as per directions of engineer in charge incl:cutting of granite/marble floors and fastening with lead grouting if required complete job at site of work including all carriages. | BI01010001010000000000000515BI0100001145 | 60 | Rft |
| 23 | 20 | Extra over item no (19) for master bluastters of standard height /dia approved by the site Engineer. | BI01010001010000000000000515BI0100001146 | 4 | no |
| 24 | 21 | Making plinth protection 50 mm thick of cement concrete 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth including all carriages. \n | BI01010001010000000000000515BI0100001147 | 74 | Sqm |
| 25 | 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions, at top, bottom and sides with required EPRM rubber/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.For fixed portion powder coated almunium (minimum thickness of powder coated 50 microns )\n | BI01010001010000000000000515BI0100001148 | 100 | kg |
| 26 | 23 | Providing and fixing 12 mm thick prelaminated particle boardflat pressed three layer or graded wood particle board(conforming IS:12823 Grade-I-type-II)in panelling fixed in almunium doors,windows shutters and partition frames with C.P brass/stainless steel screws ,rubber gas cuts,almunium beadings and other required accessories etc complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides including all carriages. | BI01010001010000000000000515BI0100001149 | 75 | Sft |
| 27 | 24 | Providing and fixing of 5 mm thick glass pans of approved brand including rubber gas cuts , aluminum beadings & required accessories as per pattern directed at site by Engineer all complete including all carriages. | BI01010001010000000000000515BI0100001150 | 75 | Sft |
| 28 | 25 | Providing and fixing of 8 mm thick 2.0’x2.0’ size cement fiber board of approved brand/shade including required frame work all complete including all carriages. | BI01010001010000000000000515BI0100001151 | 200 | Sft |
| 29 | 26 | Providing and fixing of 4 mm thick ACP of approved brand/shade including required frame work & accessories as per pattern directed at site by Engineer all complete up to floor v level | BI01010001010000000000000515BI0100001152 | 250 | Sft |
| 30 | 27 | Earth work in excavation by manual/mechanical means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan/over areas (exceeding 30 cm and upto 1.5 m in depth,1.5 m in width as well as 10 sqm on plan ) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 5km from site /edge cutting or as directed by EIC. disposed earth to be leveled and neatly dressed in all kinds of soil including pumping out water caused by springs,tidal or river seepage,broken water means or drains and the like complete during execution of work. | BI01010001010000000000000515BI0100001153 | 99 | Cum |
| 31 | 28 | Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete. | BI01010001010000000000000515BI0100001154 | 49 | Cum |
| 32 | 29 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved. | BI01010001010000000000000515BI0100001155 | 33 | Cum |
| 33 | 30 | Providing and laying in position specified grade of reinforced cement concrete excluding C/o centring and shuttering finishing and reinforcement all work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20mm nominal size) including all carriages and cost of materials involved. | BI01010001010000000000000515BI0100001156 | 4.3 | Cum |
| 34 | 31 | Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo Mechanically Treated bars. including all carriages . | BI01010001010000000000000515BI0100001157 | 538 | Kg |
| 35 | 32 | Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including all carriages. | BI01010001010000000000000515BI0100001158 | 7.5 | Cum |
| 36 | 33 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs,staircases, landings, balconies and access platforms. using 12mm ply including all carriages. | BI01010001010000000000000515BI0100001159 | 8.55 | Sqm |
| 37 | 34 | 12 mm cement plaster of mix 1:3(1 cement:3 coarse sand) including all carriages complete. | BI01010001010000000000000515BI0100001160 | 36.3 | Sqm |
| 38 | 35 | Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone including all carriages. | BI01010001010000000000000515BI0100001161 | 28 | Cum |
| 39 | 36 | Constructing brick masonry manholes of size 18\"*18\" in cement mortar1:4 ( 1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design including PVC frame with cover complete job including all carriages and costs. \n | BI01010001010000000000000515BI0100001162 | 10 | No |
| 40 | 37 | Providing and fixing of PVC soil/waste/ventellating pipes of Prince/Phenolex or equivalent make(Type-B) of following size as directed by the site Engineer including all carriages. | BI01010001010000000000000515BI0100001163 | ||
| 41 | 37.01 | 100 mm dia pipes | BI01010001010000000000000515BI0100001164 | 110 | Rm |
| 42 | 37.02 | 75 mm dia pipes | BI01010001010000000000000515BI0100001165 | 120 | Rm |
| 43 | 37.03 | 50 mm dia pipes | BI01010001010000000000000515BI0100001166 | 40 | Rm |
| 44 | 38 | Providing and fixing of PVC pipe fittings of Prince/Phenolex or equivalent make of following size to soil/waste/ventellating pipes as directed by the site Engineer including all carriages (B class). | BI01010001010000000000000515BI0100001167 | ||
| 45 | 38.01 | 100 mm dia door tee | BI01010001010000000000000515BI0100001168 | 9 | No |
| 46 | 38.02 | 100 mm dia plain bend | BI01010001010000000000000515BI0100001169 | 12 | No |
| 47 | 38.03 | 100 mm dia collar | BI01010001010000000000000515BI0100001170 | 12 | No |
| 48 | 38.04 | 100 mm dia door bend | BI01010001010000000000000515BI0100001171 | 6 | No |
| 49 | 38.05 | 100 mm dia P/S trap | BI01010001010000000000000515BI0100001172 | 9 | No |
| 50 | 38.06 | Stays and clamps | BI01010001010000000000000515BI0100001173 | 24 | No |
| 51 | 38.07 | 75 mm dia plain bend | BI01010001010000000000000515BI0100001174 | 12 | No |
| 52 | 38.09 | 75 mm dia collar | BI01010001010000000000000515BI0100001175 | 12 | No |
| 53 | 38.1 | 75 mm dia Floor trap | BI01010001010000000000000515BI0100001176 | 15 | No |
| 54 | 38.11 | 75 mm dia door bend | BI01010001010000000000000515BI0100001177 | 6 | No |
| 55 | 38.12 | 75 mm door tee | BI01010001010000000000000515BI0100001178 | 9 | No |
| 56 | 38.13 | 75 mm Cowl | BI01010001010000000000000515BI0100001179 | 6 | No |
| 57 | 38.14 | Ball cock heavy duty 15 mm dia | BI01010001010000000000000515BI0100001180 | 6 | No |
| 58 | 39 | Providing and fixing of GI pipe lines to walls/ceilings/floors (Light grade of specified mass )Prakash Surya /Jindal or equivalent including jointing,testing and making good the surface as directed by the site engineer including G.I fittings of specified brand (ISI mark UNIK/NIKE/PRINCE/JINDAL or equivalent) all carriages complete job(B class) | BI01010001010000000000000515BI0100001181 | ||
| 59 | 39.01 | 15 mm dia | BI01010001010000000000000515BI0100001182 | 350 | Rm |
| 60 | 39.02 | 20 mm dia | BI01010001010000000000000515BI0100001183 | 150 | Rm |
| 61 | 39.03 | 25 mm dia | BI01010001010000000000000515BI0100001184 | 20 | Rm |
| 62 | 40 | Providing and fixing GI pipe fittings of specified brand (ISI mark UNIK/Nike/Prince or equivalent including testing and commissioning and all carriages complete. | BI01010001010000000000000515BI0100001185 | ||
| 63 | 40.01 | Ball value Brass Heavy duty 15 mm | BI01010001010000000000000515BI0100001186 | 6 | No |
| 64 | 40.02 | Ball value Brass Heavy duty 20 mm | BI01010001010000000000000515BI0100001187 | 12 | No |
| 65 | 40.03 | Ball value Brass Heavy duty 25 mm | BI01010001010000000000000515BI0100001188 | 2 | No |
| 66 | 40.04 | Tank nipple 15 mm | BI01010001010000000000000515BI0100001189 | 6 | No |
| 67 | 40.05 | Tank nipple 20mm | BI01010001010000000000000515BI0100001190 | 12 | No |
| 68 | 40.06 | Tank nipple 25 mm | BI01010001010000000000000515BI0100001191 | 2 | No |
| 69 | 41 | Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 (triple layer)marked indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes with fittings but without base support for tank(Sintex,Electroplat,Star,Lotus or equivalent having valid ISI license) including all carriages. | BI01010001010000000000000515BI0100001192 | 6000 | Ltrs |
| 70 | 42 | Providing and fixing of CP fixtures of Jaguar /Hindware /Cera / Essel/Parko or equivalent make including jointing testing and making good to surface as directed by the site Engineer including all carriages. | BI01010001010000000000000515BI0100001193 | ||
| 71 | 42.01 | Bib cock 15 mm short body | BI01010001010000000000000515BI0100001194 | 12 | No |
| 72 | 42.02 | Angle value/stop cock 15 mm | BI01010001010000000000000515BI0100001195 | 24 | No |
| 73 | 42.03 | CP connection 18''-24'' | BI01010001010000000000000515BI0100001196 | 24 | No |
| 74 | 42.04 | wall mixer/basin mixer/sink mixer | BI01010001010000000000000515BI0100001197 | 15 | No |
| 75 | 42.05 | Health feaucit | BI01010001010000000000000515BI0100001198 | 6 | No |
| 76 | 42.06 | Gratings | BI01010001010000000000000515BI0100001199 | 9 | No |
| 77 | 42.07 | Soap dish | BI01010001010000000000000515BI0100001200 | 8 | No |
| 78 | 42.08 | Towel rail 2' long | BI01010001010000000000000515BI0100001201 | 6 | No |
| 79 | 42.09 | Looking Mirror with brush stand | BI01010001010000000000000515BI0100001202 | 6 | No |
| 80 | 42.1 | Paper holders | BI01010001010000000000000515BI0100001203 | 6 | No |
| 81 | 42.11 | Shower | BI01010001010000000000000515BI0100001204 | 6 | No |
| 82 | 42.13 | Stop cocks | BI01010001010000000000000515BI0100001205 | 6 | No |
| 83 | 43 | Providing and fixing water closet squatting pan ( Indiantype W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. brackets, 32mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required white vitereous china W.C. pan of size 580 mm including carriages(Hindustan/Cera or equivalent)\n | BI01010001010000000000000515BI0100001206 | 5 | No |
| 84 | 44 | Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixing, complete including cutting and making good the walls and floors wherever requied W.C. pan with ISI marked white plastic solid seat and lid (Hindustan or equivalent)\n | BI01010001010000000000000515BI0100001207 | 4 | No |
| 85 | 45 | Providing and fixing wash basin with pedastal (Jaguar/Hindware/Cera/Essal or equivalent) and making good the walls wherever required white vitrous china washbasin size 630*450 including all carriages\n | BI01010001010000000000000515BI0100001208 | 10 | No |
| 86 | 46 | Providing and fixing of stainless steel /labortory sink 600*450 *250 mm of standard make with CI brakets ,CP brass chain with rubber plug ,40 mm CP brass waste complete including painting fittings and brakets,cutting and making good the walls wherever required as directewd by site engineer including all carriages | BI01010001010000000000000515BI0100001209 | 3 | No |
| 87 | 47 | 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6(1 cement:6 coarse sand) including all carriages complete. | BI01010001010000000000000515BI0100001210 | 230 | Sqm |
AI Tender Summary
Tender Timeline
Nov 27, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 11, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender