Kiifb Kiidc Thalassery Heritage Project Harbour Town Circuit Streetscape Near Municipal Stadium Thp Office And Development Of Tourist Facility Center Heritage Project Works, Thalassery Municipal Stadium-Kerala

TDR : 26112009

Tender Notice
BOQ

Expired

Thalassery Municipal Stadium , Kerala

Tender Brief : Kiifb Kiidc Thalassery Heritage Project Harbour Town Circuit Streetscape Near Municipal Stadium Thp Office And Development Of Tourist Facility Center Heritage Project Works

Document Fees
₹ 2950 /-

EMD
₹ 50000.0 /-

Tender Value
Refer document

Submission Date
14-12-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Work Name : Thalassery Heritage Project- Harbour Town Circuit- Streetscape near Municipal stadium- (THP Office) and development of tourist facility center
1	1	Appendix A: Park and Building	BI01010001010000000000000515BI0100001113
2	1.01	2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared	BI01010001010000000000000515BI0100001114	1956	sqm
3	1.02	15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	BI01010001010000000000000515BI0100001115	12	cum
4	1.03	2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil	BI01010001010000000000000515BI0100001116	60.548	cum
5	1.04	4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)	BI01010001010000000000000515BI0100001117	16.107	cum
6	1.05	7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001118	51.266	cum
7	1.06	5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size	BI01010001010000000000000515BI0100001119	8.763	cum
8	1.07	5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	BI01010001010000000000000515BI0100001120	23.82	sqm
9	1.08	5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	BI01010001010000000000000515BI0100001121	876.3	kilogram
10	1.09	50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.	BI01010001010000000000000515BI0100001122	47.062	cum
11	1.1	26.43 : Providing and fixing internal wall panels on Light gauge steel frame work with12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8mmthick fiber cement board conforming to IS 14862:2000 of category III type B(High pressure steam cured) as per standard sizes fixed with self-drilling / tapingscrews / fasteners @ 60cm c/c of approved make, Screws shall be of countersunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of framework to be paid for separately)	BI01010001010000000000000515BI0100001123	48	sqm
12	1.11	9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.	BI01010001010000000000000515BI0100001124	31	metre
13	1.12	9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.	BI01010001010000000000000515BI0100001125	6.72	sqm
14	1.13	9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001126	3.781	sqm
15	1.14	6.13.2 : Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement : 4 coarse sand)	BI01010001010000000000000515BI0100001127	17.82	sqm
16	1.15	4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001128	6.241	cum
17	1.16	8.2.1.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm	BI01010001010000000000000515BI0100001129	70.878	sqm
18	1.17	15.18 : Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.	BI01010001010000000000000515BI0100001130	3360	kg
19	1.18	15.28.1 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	BI01010001010000000000000515BI0100001131	168	sqm
20	1.19	10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes	BI01010001010000000000000515BI0100001132	8280.5	kg
21	1.2	12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)	BI01010001010000000000000515BI0100001133	252	sqm
22	1.21	od222054/2019_2020 : Providing & fixing on roof pressed clay ceiling tiles 30x25cm size of 20 mm nominal thickness and of approved size and as per approved pattern	BI01010001010000000000000515BI0100001134	252	sqm
23	1.22	12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).	BI01010001010000000000000515BI0100001135	48	metre
24	1.23	50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	BI01010001010000000000000515BI0100001136	10	cum
25	1.24	13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	BI01010001010000000000000515BI0100001137	89.42	sqm
26	1.25	13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)	BI01010001010000000000000515BI0100001138	39.42	sqm
27	1.26	13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture	BI01010001010000000000000515BI0100001139	300	sqm
28	1.27	13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work	BI01010001010000000000000515BI0100001140	153.601	sqm
29	1.28	16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade	BI01010001010000000000000515BI0100001141	97.5	sqm
30	1.29	16.83 : Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.	BI01010001010000000000000515BI0100001142	923.75	sqm
31	1.3	16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.	BI01010001010000000000000515BI0100001143	923.75	sqm
32	1.31	16.78.2 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBRValue-25	BI01010001010000000000000515BI0100001144	184.75	cum
33	1.32	od47430/2020_2021 : Providing and laying rough finish granite stone (sadarhalli) flooring in required design and pattern (180 x 90 cm or nearest)in linear as well as curvillenear all complete as per the architrctural drawing with 50mm thick stone slab over 50mm thick base of stone aggregates of size 6mm etc.complete as specified and as directed by the engineer in charge	BI01010001010000000000000515BI0100001145	966	sqm
34	1.33	14.83 : Hacking of CC flooring including cleaning for surface etc. complete as perdirection of the Engineer-in-Charge.	BI01010001010000000000000515BI0100001146	97.5	sqm
35	1.34	11.41.1 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm.	BI01010001010000000000000515BI0100001147	104.85	sqm
36	2	Appendix B: Toilet Block	BI01010001010000000000000515BI0100001148
37	2.01	2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil	BI01010001010000000000000515BI0100001149	70.03	cum
38	2.02	4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)	BI01010001010000000000000515BI0100001150	8.565	cum
39	2.03	7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001151	8.398	cum
40	2.04	50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.	BI01010001010000000000000515BI0100001152	6.291	cum
41	2.05	6.13.2 : Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement : 4 coarse sand)	BI01010001010000000000000515BI0100001153	5.738	sqm
42	2.06	6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.	BI01010001010000000000000515BI0100001154	5.738	sqm
43	2.07	5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size	BI01010001010000000000000515BI0100001155	0.969	cum
44	2.08	5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001156	0.524	cum
45	2.09	5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers	BI01010001010000000000000515BI0100001157	9.69	sqm
46	2.1	5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform	BI01010001010000000000000515BI0100001158	0.72	sqm
47	2.11	5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	BI01010001010000000000000515BI0100001159	149.3	kilogram
48	2.12	9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood	BI01010001010000000000000515BI0100001160	0.259	cum
49	2.13	9.5.1.1 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.Second class teak wood35 mm thick shutters	BI01010001010000000000000515BI0100001161	4.92	sqm
50	2.14	10.30.2 : Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :5.5 mm thick glass panes	BI01010001010000000000000515BI0100001162	0.72	sqm
51	2.15	13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	BI01010001010000000000000515BI0100001163	77.445	sqm
52	2.16	11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	BI01010001010000000000000515BI0100001164	13.273	sqm
53	2.17	11.39 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.	BI01010001010000000000000515BI0100001165	21.168	sqm
54	2.18	13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)	BI01010001010000000000000515BI0100001166	77.445	sqm
55	2.19	10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	BI01010001010000000000000515BI0100001167	1030.43	kg
56	2.2	12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)	BI01010001010000000000000515BI0100001168	34.348	sqm
57	2.21	12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).	BI01010001010000000000000515BI0100001169	16.05	metre
58	2.22	od222054/2019_2020 : Providing & fixing on roof pressed clay ceiling tiles 30x25cm size of 20 mm nominal thickness and of approved size and as per approved pattern	BI01010001010000000000000515BI0100001170	34.348	sqm
59	3	Appendix C: Plumbing and Sanitary fittings	BI01010001010000000000000515BI0100001171
60	3.01	50.18.7.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall	BI01010001010000000000000515BI0100001172	60	metre
61	3.02	50.18.7.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall	BI01010001010000000000000515BI0100001173	60	metre
62	3.03	50.18.7.4.2 : Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall	BI01010001010000000000000515BI0100001174	60	metre
63	3.04	50.18.7.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall	BI01010001010000000000000515BI0100001175	50	metre
64	3.05	17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid	BI01010001010000000000000515BI0100001176	2	each
65	3.06	17.7.1 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps	BI01010001010000000000000515BI0100001177	2	each
66	3.07	18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore	BI01010001010000000000000515BI0100001178	4	each
67	3.08	18.55.1 : Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms	BI01010001010000000000000515BI0100001179	4	each
68	3.09	18.64 : Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms.	BI01010001010000000000000515BI0100001180	2	no
69	3.1	18.65 : Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.	BI01010001010000000000000515BI0100001181	2	each
70	3.11	50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.	BI01010001010000000000000515BI0100001182	2	no
71	3.12	51.19.ST4 : Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)<br>\n4. 35 to 50 flush capacity	BI01010001010000000000000515BI0100001183	1	each
72	3.13	19.32.1 : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	BI01010001010000000000000515BI0100001184	1	each
73	4	Appendix D: Seaters	BI01010001010000000000000515BI0100001185
74	4.01	od88504/2020_2021 : Supplying, fitting, fixing and handing over the garden benches (Victoria Bench - Product Code :PGGD18) or equivalent as specified in the drawings of make ARIHANT or equivalent acceptable to engineer -in - chief, with prior approval, fully complete at site with all accessories, labours, power supply etc.	BI01010001010000000000000515BI0100001186	10	each
75	5	Appendix E: Landscape	BI01010001010000000000000515BI0100001187
76	5.01	30.2.12 : Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.	BI01010001010000000000000515BI0100001188	140	sqm
77	5.02	od91748/2020_2021 : Supplying and planting of approved ground cover at required spacing as shown in drawing. Rate shall include cost of plants soil work, manure and fertilizers used in top dressing, chemical and mechanical pest control, staking and maintaining the planting till it is handed over from the date of planting from the date of planting operating etc.(2)Small lily	BI01010001010000000000000515BI0100001189	100	each
78	5.03	od90256/2020_2021 : Supplying and planting of approved trees species of a height 2.0m to 2.5m, at the specified location as shown in the drawing.Rate shall include Cost of plants, soil work inclusive of red soil, sand and manure mix staking and planting of trees sapling, replacement of dead trees and for providing a pit size 75 x 75 x 75 cm and maintainance till the competion of project work.( 1).Plumeria Alba	BI01010001010000000000000515BI0100001190	5	each
79	5.04	od90257/2020_2021 : Supplying and planting of approved shrubs at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (9)Oleander tall	BI01010001010000000000000515BI0100001191	10	each
80	5.05	od90258/2020_2021 : Supplying and planting of approved shrubs at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (1)Aglonema	BI01010001010000000000000515BI0100001192	100	each
81	5.06	30.2.33 : Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler	BI01010001010000000000000515BI0100001193	140	sqm
82	6	Appendix F: Electrification	BI01010001010000000000000515BI0100001194
83	6.01	1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC\ninsulated copper conductor single core cable in surface / recessed medium class PVC conduit,\nwith modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS\nPVC insulated copper conductor single core cable etc as required.Group C	BI01010001010000000000000515BI0100001195	7	point
84	6.02	1.34 : Supplying and fixing brass batten/ angle holder including connection etc. as required.	BI01010001010000000000000515BI0100001196	5	each
85	6.03	1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loop earthing as required.	BI01010001010000000000000515BI0100001197	2	metre
86	6.04	1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire	BI01010001010000000000000515BI0100001198	10	metre
87	6.05	od103707/2020_2021 : Supplying & fixing 6W LED bulb in the existing batten/angle holder.	BI01010001010000000000000515BI0100001199	5	each
88	6.06	2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole	BI01010001010000000000000515BI0100001200	7	each
89	6.07	2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole	BI01010001010000000000000515BI0100001201	1	each
90	6.08	2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole	BI01010001010000000000000515BI0100001202	1	each
91	6.09	2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door	BI01010001010000000000000515BI0100001203	1	each
92	6.1	2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual\ncurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps	BI01010001010000000000000515BI0100001204	1	each
93	6.11	9.1.2 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.2 X 10 sq. mm (19mm)	BI01010001010000000000000515BI0100001205	38	set
94	6.12	90.12.1.3 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).	BI01010001010000000000000515BI0100001206	200	metre
95	6.13	90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required	BI01010001010000000000000515BI0100001207	1	each
96	6.14	90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required	BI01010001010000000000000515BI0100001208	200	metre
97	6.15	1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).	BI01010001010000000000000515BI0100001209	2	each
98	6.16	2.10.5 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral	BI01010001010000000000000515BI0100001210	1	each
99	6.17	90.4.8 : Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.	BI01010001010000000000000515BI0100001211	2	each
100	6.18	od103708/2020_2021 : Supply and fitting167x125mmx82mm ) Sintex cable junction box ( on existing lamp post using suitable clamps.	BI01010001010000000000000515BI0100001212	18	each
101	6.19	od103709/2020_2021 : Supply, installation , testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.300/305mm light duty	BI01010001010000000000000515BI0100001213	2	each
102	6.2	od103710/2020_2021 : Supply Conveyance, installation, testing and commissioning of new generation post top environment friendly, energy saving, long life, aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LED as light source. 25W 5600K, with IP65 protection suitable for 76mm dia. pole. (Havells Ruby clear or equivalent)	BI01010001010000000000000515BI0100001214	18	each
103	6.21	od106351/2020_2021 : Supply and fixing 32A, 4way connector in the existing junction box	BI01010001010000000000000515BI0100001215	18	each
104	6.22	od103711/2020_2021 : Supply and fixing 32A, 2way neutral link mounted on DMC/SMC base with connections in existing meter board.	BI01010001010000000000000515BI0100001216	18	each
105	6.23	od136499/2020_2021 : Supplying & fixing Cast iron lamp pole of height 4mtrs. base dia.250mm and top dia.75mm (weight 110kg. Arox. with provision for fixing MCB and cably entry/exit at bottom made of FG15 grade cast iron with MRF apoxy black finish over a coat of zinc chromate base on existing concrete foundation using foundation bolts, nuts and washers.	BI01010001010000000000000515BI0100001217	18	each
106	6.24	od136500/2020_2021 : Supply and fixing cast iron post top lanternd 28W inbuilt LED with shade of size 540x450mm with powder coated finish an giving connection as required.	BI01010001010000000000000515BI0100001218	18	each

Also Visit

Tenders

Kerala Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Kiifb Kiidc Thalassery Heritage Project Harbour Town Circuit Streetscape Near Municipal Stadium Thp Office And Development Of Tourist Facility Center Heritage Project Works, Thalassery Municipal Stadium-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Kiifb Kiidc Thalassery Heritage Project Harbour Town Circuit Streetscape Near Municipal Stadium Thp Office And Development Of Tourist Facility Center Heritage Project Works, Thalassery Municipal Stadium-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us