Provision Of Compound Wall With Gate At Bitra Island

Tender Notice

26100635
Corrigendum : Provision Of Compound Wall With Gate At Bitra Island
Indian
Lakshadweep
04-12-2020
11-12-2020
14-12-2020

Tender Details

Provision Of Compound Wall With Gate At Bitra Island

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 04-Dec-202 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 11-12-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 73600.00 /-
Tender Value
INR 36.80 Lakhs /-

BOQ Items

Name of Work: PROVN OF COMPOUND WALL WITH GATE AT BITRA ISLAND
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in trenches. n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts ,wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil. 121.66 Cum
2 2 M&L for hardcore of gauge n exc 63mm, deposited, spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface using broken stone or boulders with sand filling in pores and consolidated using water jet and rolled in 02 layers of 15cm each etc complete all as specified and shown in drawings. 21.38 Cum
3 3 M&L plain cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete all as specified and shown in drawings. 15.83 Cum
4 4 M&L RCC M30 design mix using 20mm graded stone aggregate in foundations, including rafts, footings, foundation beams, plinth beams etc complete all as specified and shown in drawings. 32.13 Cum
5 5 M&L RCC M30 design mix using 20mm graded stone aggregate in columns etc complete all as specified and shown in drawings. 5 Cum
6 6 M&L RCC M30 design mix using 20mm graded stone aggregate in RCC wall etc complete all as specified and shown in drawings. 10.77 Cum
7 7 M&L Mild steel CRS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips 3767.04 Kg
8 8 Ditto all as item no 7 above but 5mm dia and over up to and including 10 mm dia in stirrups, spacers and binders 1301.05 Kg
9 9 Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits (if any) of foundation and plinth beam of rough finished flat surfaces of concrete etc complete all as specified and as directed by the Engineer-in-charge. 172.28 Sqm
10 10 Use & waste of formwork to sides of pillars, posts, struts, piers, columns etc. of rough finished, square or rectangular flat surfaces of concrete etc complete all as specified and as directed by the Engineer-in-charge. 63 Sqm
11 11 Use & waste of formwork to sides of RCC wall etc. of rough finished flat surfaces of concrete etc complete all as specified and as directed by the Engineer-in-charge. 126 Sqm
12 12 Material and labour for Precast cement concrete 1:3:6 using 20mm graded stone aggregate, type C4 as per IS-2185(Part I) 2005 solid block masonry built in cement mortar 1:4 all as specified and as directed by the Engineer-in-Charge. 31.08 Cum
13 13 Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in hard / dense soil. \nNote : Spl condition 3.6 of SSR part - II shall apply for finished quantity & paid accordingly. 53.16 Cum
14 14 Removing excavated soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed. 68.5 Cum
15 15 S&F Galvanized iron frame work conforming to Fe-410 (Gde E-250 quality) as in door or gates of angle or other section with gusset plates, rails,braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors ,etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including steel sheeting or other covering, running rails and guides and hanging; also fastening and fixing complete all as specified and as directed by the Engineer-in-charge. Note :- (i) The design and size of gates shall be as directed by GE. 250 Kg
16 16 M&L Preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over one coat of priming with red oxide etc complete all as specified and directed by Eng-in-Charge 11 Sqm
17 17 M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete or masonry surfaces finished even & fair without using extra cement complete all as specified and as directed 496 Sqm
18 18 M&L broken glass coping on top of walls rendered with 25mm layer in CM 1:3 as required with a rounded or weathered finish and embedded with broken glass of size n exc 63mm gauge at the rate of 10 kg of glass/ Sqm on rendered surface with jagged edges left projecting etc complete all as specified and as directed. 37.58 Sqm
19 19 M&L preparing newly plastered surfaces and applying two coats of cement base paint etc complete all as specified and as directed. 496 Sqm
20 20 M&L reinforced cement concrete type B1 1:2:4 using 20 mm graded stone aggregate in coping including necessary formwork (Straight or curved) finished fair including weathering, slightly rounded or chamfered angles etc complete all as specified and as directed.\nNote : Reinforcement shall be measured and paid separately. 3.36 Cum
21 21 M&L 18 to 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over cement screed including providing cement screed in CM 1:3, 10mm thick and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, grinding and polishing etc complete all as specified and as directed. 2 Sqm
22 22 M&L Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high with synthetic enamel thick paint of any colour as approved by GE. 5 Per 10 Nos (Per cm of height)
23 23 M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' etc complete all as specified and as directed. \nNote for items No. 1 to 23 above :- While quoting the rates of items Nos 1 to 23 above, it is deemed that the provisions detailed under Sch 'A' Notes 1 to 17 are taken into account and nothing extra shall be admissible on this account. 18.4 Rm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail