Construction Of 6 Numbers Type 2 Quarters At Residential Quarters Building At Regional Hospital Campus At Una Distt . Una H . P Sh Providing E . I . There In
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Dec 2020
0 days left
EMD
11700
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una HP → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 6 Numbers Type 2 Quarters At Residential Quarters Building At Regional Hospital Campus At Una Distt . Una H . P Sh Providing E . I . There In
BOQ
| Name of Work: Construction of 6 Numbers Type II Quarters at residential Quarters building at Regional Hospital Campus at Una Distt. Una (H.P).(SH:-Providing E.I.there in ) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required..(SSK(Lica model),Anchor,L&T make) | |||
| 2 | 1.01 | (a) Group A. | 133 | Each | |
| 3 | 2 | Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(SSK(Lica model), Anchor,L&T make) | |||
| 4 | 2.01 | (a) Group A. | 6 | Each | |
| 5 | 3 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. | 96 | P/Mtr. | |
| 6 | 4 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. | 180 | P/Mtr. | |
| 7 | 5 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. | 108 | P/Mtr. | |
| 8 | 6 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Finolex,KEI,Anchor,L&T make) | |||
| 9 | 6.01 | (a) 2x1.5 Sq. mm. | 222 | P/mtr. | |
| 10 | 6.02 | (b) 2x10 sq.mm. | 136 | P/mtr. | |
| 11 | 7 | Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.(Finolex,KEI,Anchor,L&T make) | |||
| 12 | 7.01 | (a) 3x1.5 Sq. mm. | 60 | P/mtr. | |
| 13 | 8 | Supplying and fixing of following sizes of steel conduit along with the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:- | |||
| 14 | 8.01 | a) 25mm dia. | 12 | P/Mtr. | |
| 15 | 9 | Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required. | 30 | Each | |
| 16 | 10 | Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required. | 30 | Each | |
| 17 | 11 | Supplying and fixing call bell / buzzer, suitable for D.C./A.C.single phase,230 volts complete as required:-(SSK,Anchor make) | 6 | Each | |
| 18 | 12 | Supplying and fixing plain pendent with 16/0.20 mm twin twisted, flexible, PVC insulated, cotton braided, copper cable and bakelite pendent holder including connections etc. as required:- | 6 | Each | |
| 19 | 13 | Supplying and fixing bakelite batten/angle holder including connections etc. as required:- (SSK,Anchor make) | 24 | Each | |
| 20 | 14 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- | |||
| 21 | 14.01 | a) Single pole 6 Amp. Cat.A. | 18 | Each | |
| 22 | 14.02 | b) Singl;e pole 16Amp. Cat.A. | 30 | Each | |
| 23 | 15 | Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- | |||
| 24 | 15.01 | a) Double pole Cat.A. | 6 | Each | |
| 25 | 16 | Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 26 | 16.01 | a) 63Amp Cat.A. | 6 | Each | |
| 27 | 17 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- | |||
| 28 | 17.01 | a) double Door 12 way | 6 | Each | |
| 29 | 18 | Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. | 1 | P/Set | |
| 30 | 20 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. | 1 | P/Set | |
| 31 | 21 | Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required. | 48 | P/Mtr.` | |
| 32 | 22 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- | |||
| 33 | 22.01 | a) 35 Litr. Capacity water heater (Cat.A). | 6 | Each | |
| 34 | 23 | Providing, Installation, testing and commissioning of ceiling fan without step type fan regulator modular, air delivery 215m3/min power input 30 watts speed 330RPM , including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- | |||
| 35 | 23.01 | a) Ceiling fan 1200mm sweep (Bajaj Ultima/Havells Velocity/Usha Technix+ and Crompton H.S Plus 5 Star)(Category-A not less than three star). | 18 | Each | |
| 36 | 24 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- | |||
| 37 | 24.01 | a) Exhaust Fan, Light duty, (Domestic) 300 mm sweep | 12 | Each | |
| 38 | 25 | Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. | |||
| 39 | 25.01 | a) Fixed type wall bracket 150 dia, single lamp.(Category-A) | 6 | Each | |
| 40 | 26 | Supplying and fixing of exhaust fan louver shutter for 300mm exhaust fan on the existing wall, painting etc. as required. HSB/National make. | 12 | Each | |
| 41 | 27 | Supplying and fixing surface mounting LED 18 watts metal round down light for soft diffuser lighting cool white and it should be compartible with specifications i.e power factor >0.9 Harmonic distortion <10% & effcency > 100 Lumen per watts, CRI>80, 6500 K suitable for input voltage 220-240 Volts, 50 HZ, IP rating 20 Surge rating upto 3 KV, diamensions 21.2x20x3mm complete with connections etc. as required (Tisva EZIO Series Code No. DLP181623M/Pansonic/Pilips or its equivalent make) | 9 | Each | |
| 42 | 28 | Providing and fixing LED Street Light 60 watts die cast aluminium housing AC 85-270 volts, available color temperature 5700 K.CRI 80, IP rating 66, upto 10 KVA Electric surge protection complete with all Bracket, accessories, connections, testing and commissioning etc. as required. (Wipro Skyline Code No. LR 02-671-XXX-57-G2/Clair//Philips make). | 6 | Each | |
| 43 | 29 | Supplying and fixing of Sub-main wiring with 16Sq.mm. weather proof twin core aluminium conductor cable on the G.I. bearer wire etc. as required. | 240 | P/Mtr. | |
| 44 | 30 | Supplying and fixing LED Lamp 9 watts 6500 K E-27,900 Lumens 240 vo9lts AC supply 50 HZ in the existing batten holder, pendent holder, wall bracket & Bulk head fitting etc. as required (Tiswa Cat. No. AL946611X/Panasonic/Philips make). | 30 | Each | |
| 45 | 31 | Providing and fixing LED surface/pendent mounting tube fixture 9 watts Jaquar make glazed LED batten Cat. No. LSLMo1R009XN high quality design aluminium extruded decorative end capsas per best satisfaction of Engineer-in-charge complete as required. | 6 | Each | |
| 46 | 32 | Supplying and fixing Pendent Light LED 9 watts 3000K size 272x170x70mm Blue and Metal commercial Philips/Bajaj make complete with connections etc. as required. | 12 | Each | |
| 47 | 33 | Supplying and fixing of bulk head fitting LED 10 watts and should be compatible with specifications i.e power factor <0.9 Harmonic distortion < 10% & efficiacy > 100 Lumen per watts CRI> 80 6500 K suitable for input voltage 220-240 volts 50 HZ Length 232x Width 105x Height 50 mm size complete with connections etc. as required (Panasonic Ellipto Code No. PBHM01107,Philips /Jaquar/Tisva make). | 7 | Each | |
| 48 | 34 | Providing and fixing LED surface/pendent mounting Tube fixture 36 watts LED batten anopdised extruded housing high transmissibility diffuser and it should be compartible with specifications i.e power factor>0.9, Harmonic <10% & effciency > 100 Lunes per watts, CRI>80, 5700 K suitable for input voltage 220-240 volts, 50 HZ, Length 1175x30x36mm compllete with connections and as per best satisfaction of Engineer-in-charge complete as required. (Panasonic Harrowal code No. PBTM08368/Philips/K.Lite or its equivalent make. | 24 | Each | |
| 49 | 35 | TERM AND CONDITIONS :-1. Conduit pipe is to be laid simultaneously with the progress of civil work.2. No part rates for any single items in Schedule of quantity will be accepted and the tender will be accordingly rejected.3. The Electricity items/fixture of any other material for which absurd low rates are quoted by the Contractor will have to be supplied in first instance.4. Test certificate along with bill for the items demanded by the department will have to supplied before installation. |
AI Tender Summary
Tender Timeline
Nov 25, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 11, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender