Constructing Of Main Phc Building At Velavi Tal Dapoli Dist Ratnagiri
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Dec 2020
0 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dapoli → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Of Main Phc Building At Velavi Tal Dapoli Dist Ratnagiri
BOQ
| Name of Work:- Constructing of Main PHC Building at Velavi Tal Dapoli Dist Ratnagiri | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means | BI01010001010000000000000515BI0100001113 | 672.5 | Cmt |
| 2 | 2 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the\nexcavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means | BI01010001010000000000000515BI0100001114 | 74.7 | Cmt |
| 3 | 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible\nDrum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely\nwashed etc) | BI01010001010000000000000515BI0100001115 | 95.6 | Cmt |
| 4 | 4 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and\nsteel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing\nroughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\n | BI01010001010000000000000515BI0100001116 | 29.9 | Cmt |
| 5 | 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro\nprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine\naggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001117 | 28.9 | Cmt |
| 6 | 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand\nroughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully\nautomatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely\nwashed etc) | BI01010001010000000000000515BI0100001118 | 57 | Smt |
| 7 | 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork,\ncover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to\ngive a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and\nstructural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001119 | 64.6 | Smt |
| 8 | 8 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/ pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement\nand structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001120 | 13.5 | Cmt |
| 9 | 9 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant\n(Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001121 | 6 | Cmt |
| 10 | 10 | Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps,\nfootings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. | BI01010001010000000000000515BI0100001122 | 25.97 | MT |
| 11 | 11 | Providing laterite stone masonry in cement mortar 1:6 in foundation and plinth including striking joints on the unexposed face and watering complete | BI01010001010000000000000515BI0100001123 | 21.3 | cmt |
| 12 | 12 | Filling in plinthj and floors with approved excavated material in 15cm layers including watering and compacting etc complete | BI01010001010000000000000515BI0100001124 | 592.2 | Cmt |
| 13 | 13 | Providing dry/trap/granite/quartzite/gniess rubble stone soling 15cm to 20cm thick including hand packing and compacting etc complete | BI01010001010000000000000515BI0100001125 | 162 | Cmt |
| 14 | 14 | Providing laterite stone masonry in cement mortar 1:6 in superstructure inclding striking joints on the unexposed face and watering complete | BI01010001010000000000000515BI0100001126 | 113.5 | Cmt |
| 15 | 15 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild\nsteel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly\nbent and bonded at ends scaffolding, racking out joints and watering etc. complete. | BI01010001010000000000000515BI0100001127 | 66.1 | smt |
| 16 | 16 | Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail\nwith 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel\nfixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) | BI01010001010000000000000515BI0100001128 | 63.1 | smt |
| 17 | 17 | Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge\nthickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make\nand manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm\nthick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge,manufacturer'sspecification and drawing. | BI01010001010000000000000515BI0100001129 | 29.8 | Smt |
| 18 | 18 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat\ncement slurry, curing, polishing, moulding edges, cleaning complete. a) Marble other than white makrana\n | BI01010001010000000000000515BI0100001130 | 180.8 | smt |
| 19 | 19 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom\n40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and\nfastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating\nwith box | BI01010001010000000000000515BI0100001131 | 47.6 | smt |
| 20 | 20 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of\nM.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12\nmm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels\nbe 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces,\nhandles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). | BI01010001010000000000000515BI0100001132 | 5.9 | smt |
| 21 | 21 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per\ndetailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of\napproved quality etc. complete. | BI01010001010000000000000515BI0100001133 | 13.1 | smt |
| 22 | 22 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 with neeru finish to concrete surface in all positions including scaffolding and curing etc complete | BI01010001010000000000000515BI0100001134 | 1190.2 | smt |
| 23 | 23 | Providing internal cement plaster 6mm thick in single coat in cement mortar 1:3 without neeru finish concrete surface in all positions including scaffolding and curing etc complete | BI01010001010000000000000515BI0100001135 | 418.7 | smt |
| 24 | 24 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm\nthick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the\nsurface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. | BI01010001010000000000000515BI0100001136 | 530.1 | Smt |
| 25 | 25 | Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.a)Flooring | BI01010001010000000000000515BI0100001137 | 402.9 | smt |
| 26 | 26 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete | BI01010001010000000000000515BI0100001138 | 281.6 | smt |
| 27 | 27 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including\nfloat filling joints with neat cement slurry curing polishing and cleaning etc. complete.\n | BI01010001010000000000000515BI0100001139 | 10.6 | smt |
| 28 | 28 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved\nquality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. | BI01010001010000000000000515BI0100001140 | 168.9 | Rmt |
| 29 | 29 | Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface testing etc. complete. | BI01010001010000000000000515BI0100001141 | 7 | No |
| 30 | 30 | Providing and fixing 8cm CI Nahani Trap including Ci grating bend and piece of CI pipe upto the outside face of the wall complete | BI01010001010000000000000515BI0100001142 | 12 | No |
| 31 | 31 | Providing and fixing 450mmX550mm size superior type Belgium mirror with 16mm dia nickel plated towel rod etc complete | BI01010001010000000000000515BI0100001143 | 23 | No |
| 32 | 32 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.\n | BI01010001010000000000000515BI0100001144 | 23 | No |
| 33 | 33 | Providing and fixing orissa type colour glazed earthenware 625 x 450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the out side\nface of wall including 100 mm. dia. C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete. | BI01010001010000000000000515BI0100001145 | 10 | No |
| 34 | 34 | Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc.complete.\n | BI01010001010000000000000515BI0100001146 | 1 | No |
| 35 | 35 | Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding \npreparing the surface, applying the acrylic wall putti etc. complete.\n | BI01010001010000000000000515BI0100001147 | 1609 | smt |
| 36 | 36 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. | BI01010001010000000000000515BI0100001148 | 530 | smt |
| 37 | 37 | Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm and finishing the same with\nsprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with\nfibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs.\n100/- etc. complete. | BI01010001010000000000000515BI0100001149 | 549 | Rmt |
| 38 | 38 | Providing soak pit of size 120cmX120cm X120cm including excavating and filling with brick-bats | BI01010001010000000000000515BI0100001150 | 3 | No |
| 39 | 39 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. | BI01010001010000000000000515BI0100001151 | 10 | No |
| 40 | 40 | Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions\nlaying, jointing (including excavation and refilling the trenches)complete. \n | BI01010001010000000000000515BI0100001152 | 80 | Rmt |
| 41 | 41 | Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 kg)\n | BI01010001010000000000000515BI0100001153 | 3 | Rmt |
| 42 | 42 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes\nand stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe,\nlead trap, soil pipe connectionup to the outside face of the wall\n | BI01010001010000000000000515BI0100001154 | 4 | Rmt |
| 43 | 43 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting,\nfinishing etc. complete. | BI01010001010000000000000515BI0100001155 | 3 | Rmt |
| 44 | 44 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating\nin the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. \n | BI01010001010000000000000515BI0100001156 | 2 | No |
| 45 | 45 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. | BI01010001010000000000000515BI0100001157 | 3.5 | Rmt |
| 46 | 46 | Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars,\nexcavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.\n | BI01010001010000000000000515BI0100001158 | 20 | Rmt |
| 47 | 47 | Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for\nwater tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti\nCorossive Paint)\n\n | BI01010001010000000000000515BI0100001159 | 10 | Rmt |
| 48 | 48 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complet | BI01010001010000000000000515BI0100001160 | 32.6 | Smt |
| 49 | 49 | Providing and fixing hydraulic door closure including fixtures and fastening as per IS standred etc complete | BI01010001010000000000000515BI0100001161 | 6 | No |
| 50 | 50 | Providing and fixing miled steel grating for darinage at kort yard of size 30 cm Dia as directed by engineer incharge complete | BI01010001010000000000000515BI0100001162 | 2 | No |
| 51 | 51 | Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge\nwith all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. a) Without powder coating. Note While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered. | BI01010001010000000000000515BI0100001163 | 2.1 | smt |
| 52 | 52 | Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48\nKg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats\nIncluding necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as\ndirected etc. complete A)15mm dia | BI01010001010000000000000515BI0100001164 | 60 | Rmt |
| 53 | 53 | Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48\nKg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats\nIncluding necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as\ndirected etc. complete B)25mm dia | BI01010001010000000000000515BI0100001165 | 130 | Rmt |
| 54 | 54 | Providing and fixing 25mm diameter concussion push botton type brass/gun metal self-closing tap including necessary socket complete | BI01010001010000000000000515BI0100001166 | 8 | No |
| 55 | 55 | Providing and fixing 15mm dia screw down bib/ stop tap of brass including necessary sockets/ union nut complete | BI01010001010000000000000515BI0100001167 | 15 | No |
| 56 | 56 | Providing and fixing 25mm dia screw down bib/ stop tap of brass including necessary sockets/ union nut complete | BI01010001010000000000000515BI0100001168 | 5 | No |
| 57 | 57 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm\nfrom face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly\nresting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or\ndislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc.\ncomplete | BI01010001010000000000000515BI0100001169 | 57 | Rmt |
| 58 | 58 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above\n1000 to 20,000 litres\n | BI01010001010000000000000515BI0100001170 | 15000 | Liter |
| 59 | 59 | Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete\n | BI01010001010000000000000515BI0100001171 | 2.2 | smt |
| 60 | 60 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. \n | BI01010001010000000000000515BI0100001172 | 779 | smt |
| 61 | 61 | Providing painting and lettering for Name Board which Describing details of such work etc complete | BI01010001010000000000000515BI0100001173 | 1 | No |
| 62 | 62 | Repayment of Royality for material utilised for this work Trap Rubble | BI01010001010000000000000515BI0100001174 | 162 | Cmt |
| 63 | 63 | Cement 1)Standard consistency,Fineness, specific Gravity,setting Time (Initial and Final) Compressive strength,soundness etc Group Test | BI01010001010000000000000515BI0100001175 | 2 | Test |
| 64 | 64 | 2)Fine Aggregate 1)Fineness modulus (Sieve Analysis) Silt and clay content etc Group test | BI01010001010000000000000515BI0100001176 | 2 | Test |
| 65 | 65 | 3 Aggregate 1) Water Absorption,specific Gravity,impact value/crushing value ettc Group Test | BI01010001010000000000000515BI0100001177 | 1 | Test |
| 66 | 66 | 4)stone/Rubble 1)Crushing value/compressive strength,water absorption and specific Gravity etc Group test | BI01010001010000000000000515BI0100001178 | 1 | Test |
| 67 | 67 | 5)Steel Bar 1) Tensile strength Elongation,Yield stress,weight per meter Bend/Rebend Test Proof stress etc Group Test | BI01010001010000000000000515BI0100001179 | 1 | Test |
| 68 | 68 | 6) Concrete 1)Compressive strength of CC cube (Set of 3 cubes) | BI01010001010000000000000515BI0100001180 | 10 | Test |
| 69 | 69 | 2)concrete Mix Design Test | BI01010001010000000000000515BI0100001181 | 1 | Test |
| 70 | 70 | 7)ceramic/vetrified Tiles 1)Water Absorption, Modulus of Rupture (set of 6 Tiles) | BI01010001010000000000000515BI0100001182 | 2 | Test |
| 71 | 71 | GST | BI01010001010000000000000515BI0100001183 | 1 | Job |
AI Tender Summary
Tender Timeline
Nov 25, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 19, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 21, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender