| 1 | 1 | B/R WORK | | | |
|---|
| 2 | 2 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed. | | 75 | SQM |
|---|
| 3 | 3 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. | | 18.5 | CUM |
|---|
| 4 | 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed. | | 9.5 | CUM |
|---|
| 5 | 5 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. | | 18 | CUM |
|---|
| 6 | 6 | Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. | | 22 | CUM |
|---|
| 7 | 7 | M & L for PCC M-7.5 grade, (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed. | | 4 | CUM |
|---|
| 8 | 8 | M & L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in coping including necessary formwork complete all as specified and as directed. | | 0.58 | CUM |
|---|
| 9 | 9 | M&L for PCC M10 grade (Nominal mix) using 20mm graded stone agg as in hold fast etc. complete all as specified & directed. | | 0.1 | CUM |
|---|
| 10 | 10 | M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. | | 9 | CUM |
|---|
| 11 | 11 | M&L for RCC M-15 (nominal mix) using 20 mm graded crushed stone aggregate as in beams, lintels and the like over 1.5m span complete all as specified and directed. | | 0.8 | CUM |
|---|
| 12 | 12 | Supply of Integral water proofing Compound ISI marked. | | 5.78 | KG |
|---|
| 13 | 13 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. | | 22 | CUM |
|---|
| 14 | 14 | M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. | | 5 | SQM |
|---|
| 15 | 15 | M&L for 20mm thick damp proof course in CM 1:2 using water proofing compound @2% by weight of cement or as per manufacture instruction to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. (Note: WPC will be measured and paid separately here-in-after) | | 8 | SQM |
|---|
| 16 | 16 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed. | | 15 | SQM |
|---|
| 17 | 17 | M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed. | | 3.55 | CUM |
|---|
| 18 | 18 | M&L for 2nd class hardwood plain fillets. bullnosed, splayed, chamfered or rounded on one edge or face, wrought, secured with nails or brads as in lipping for cupboard shutter, sectional area exc 3 Sqcm but n exc 6 Sqcm complete all as specified and directed | | 88 | RM |
|---|
| 19 | 19 | S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. | | 0.33 | CUM |
|---|
| 20 | 20 | M&L for 35mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed. | | 3.6 | SQM |
|---|
| 21 | 21 | M&L for 30mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(b) complete all as specified and directed. | | 14 | SQM |
|---|
| 22 | 22 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | | 3.6 | SQM |
|---|
| 23 | 23 | S & F 2nd class hard wood small fittings such as brackets of any type ,latch and hing block ,shaped door and window stops and the like including all necessary labours articles n exe 200 cu.cm each complete all as specified and directed. | | 4 | EACH |
|---|
| 24 | 24 | S & F 100 mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed and fixed section barrel tower bolts complete all as specified and directed. | | 48 | EACH |
|---|
| 25 | 25 | S & F 150 mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed and fixed section barrel tower bolts complete all as specified and directed. | | 8 | EACH |
|---|
| 26 | 26 | S & F Mild steel sliding door bolts 300 mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. | | 2 | EACH |
|---|
| 27 | 27 | S&F 50mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. | | 4 | EACH |
|---|
| 28 | 28 | S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. | | 12 | EACH |
|---|
| 29 | 29 | S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified nd directed | | 2 | EACH |
|---|
| 30 | 30 | S&F 100mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. | | 24 | EACH |
|---|
| 31 | 31 | S&F 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. | | 8 | EACH |
|---|
| 32 | 32 | S&F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed | | 10 | RM |
|---|
| 33 | 33 | S&F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. (Minimum weight 190gms) | | 1 | EACH |
|---|
| 34 | 34 | S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140 mm overall lenth of cover plate.complete all as specified and directed. | | 2 | EACH |
|---|
| 35 | 35 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed. | | 13.5 | SQM |
|---|
| 36 | 36 | M&L for MS work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. | | 875 | KG |
|---|
| 37 | 37 | S & F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed | | 2 | KG |
|---|
| 38 | 38 | S & F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends each screwed end be fitted with washers and one hexagonal or square nut exc 5 cm but n.exc 10 cm long and dia of shank 5 to 10 mm complete all as specified and as directed. | | 2 | KG |
|---|
| 39 | 39 | M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. | | 80 | KG |
|---|
| 40 | 40 | M&L for TMT bars 8mm dia and over upto 10mm cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders complete all as specified and directed | | 25 | KG |
|---|
| 41 | 41 | M&L for MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. | | 55 | KG |
|---|
| 42 | 42 | M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 (Grade E-165) quality-A complete all as specified and as directed. | | 13 | KG |
|---|
| 43 | 43 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.complete all as specified and as directed. | | 750 | KG |
|---|
| 44 | 44 | S&F MS pipe medium duty 200mm dia (thickness of wall of pipe 5.6mm) in vertical post conforming to IS-1161-1998 embedded in concrete complete all as specified and directed. | | 154 | KG |
|---|
| 45 | 45 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type cranked hook bolt and washer in roof, wall etc. with grade of zinc coating 275 complete all as specified and directed. | | 128 | SQM |
|---|
| 46 | 46 | S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. | | 70 | SQM |
|---|
| 47 | 47 | S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | | 20 | SQM |
|---|
| 48 | 48 | M & L for 6mm thick plywood (no of ply 05), grade BWR, type BB, fixed with nails to timber frame work on ceilling complete all as specified and directed. | | 52 | SQM |
|---|
| 49 | 49 | M & L for 6mm thick plywood (no of ply 05), grade BWR, type BB, fixed with nails to timber frame work in wall complete all as specified and directed. | | 51 | SQM |
|---|
| 50 | 50 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.(Note: Screed bed will be measured & paid seperately) | | 108 | SQM |
|---|
| 51 | 51 | M&L for machine cut kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar over & including 10 mm cement mortar backing in cm (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge | | 8 | SQM |
|---|
| 52 | 52 | M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed. | | 27 | SQM |
|---|
| 53 | 53 | M&L for 75mm thick PCC M10 grade (Nominal mix) using 20mm graded crushed stone aggregate as in sub base complete all as specified and directed. | | 15 | SQM |
|---|
| 54 | 54 | M&L for 100mm thick PCC M7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed. | | 30 | SQM |
|---|
| 55 | 55 | M&L for 75mm thick PCC M7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed. | | 52 | SQM |
|---|
| 56 | 56 | M&L 25mm thick cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregateas in floor, finishes even and rough to receive floor tiles complete all as specified and directed. | | 123 | SQM |
|---|
| 57 | 57 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed. | | 56 | SQM |
|---|
| 58 | 58 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) complete all as specified and directed. | | 8 | SQM |
|---|
| 59 | 59 | M&L coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | | 15 | SQM |
|---|
| 60 | 60 | M & L for rendering 15mm thick plaster in cement mortar (1:6) on other than fair faces brick work or concrete surfaces finish the surfaces even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)\n\n | | 30 | SQM |
|---|
| 61 | 61 | M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand)\n[Note: WPC will be measured and paid separately)\n | | 35 | SQM |
|---|
| 62 | 62 | M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed. | | 15 | SQM |
|---|
| 63 | 63 | M & L for 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed. | | 108 | SQM |
|---|
| 64 | 64 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed. | | 35 | SQM |
|---|
| 65 | 65 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed. | | 31 | SQM |
|---|
| 66 | 66 | S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. | | 8.5 | SQM |
|---|
| 67 | 67 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. | | 104 | SQM |
|---|
| 68 | 68 | M&L for preparing of new wooden surfaces of any description and girth, not otherwise described and treated with a coat of creosote oil complete all as specified and directed. | | 75 | SQM |
|---|
| 69 | 69 | M&L for prepraration of new or untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying one coat of red oxide complete all as specified and directed. | | 20 | SQM |
|---|
| 70 | 70 | M&L for prepraration of new or untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | | 124.5 | SQM |
|---|
| 71 | 71 | M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coats synthetic paint over a coat of red oxide primer complete all as specified and directed. | | 188 | SQM |
|---|
| 72 | 72 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | | 10 | RM |
|---|
| 73 | 73 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | | 7 | RM |
|---|
| 74 | 74 | S & F in repairs bore bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed. | | 2 | EACH |
|---|
| 75 | 75 | S&F in repairs pillar taps, ISI marked cast copper alloy chromium plated, with capstan heads, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed. | | 1 | EACH |
|---|
| 76 | 76 | S&F stop valves 15mm cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed botyh ends for iron pipe or for unions and fixed. | | 3 | EACH |
|---|
| 77 | 77 | S&F in repairs 32mm dia Waste coupling of PTMT (half or full threaded)suitable for urinals complete all as specifed and directed. (Minimum weight 45gms) | | 1 | EACH |
|---|
| 78 | 78 | M&L PVC SWR pipe dia 110mm single socketed in any leanth with rubber ring joints, laid in trenches or floors.complete all as specified and directed. | | 6 | RM |
|---|
| 79 | 79 | M&L PVC SWR pipe dia 75mm single socketed in any leanth with rubber ring fixed in floor or wall. complete all as specified and directed. | | 4 | RM |
|---|
| 80 | 80 | S&F 110mm bore PVC (SWR) bend door type complete all as specified and directed. | | 1 | EACH |
|---|
| 81 | 81 | S&F 75mm bore PVC (SWR) bends complete all as specified and directed. | | 1 | EACH |
|---|
| 82 | 82 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. | | 1 | EACH |
|---|
| 83 | 83 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. | | 1 | EACH |
|---|
| 84 | 84 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed. | | 1 | EACH |
|---|
| 85 | 85 | M & L for concrete bed to drain pipes 100mm including packing under ,and haunching against the sides of pipes after they are laid and tested in cement concrete( 1:3:6) type C2 complete all as specified and directed. | | 6 | RM |
|---|
| 86 | 86 | Cutting into existing manholes for connecting new drains for pipe of 100mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in M-15 grade (Nominal mic) using 20mm graded crushed stone aggregate, smooth finished, and reforming benching as required complete all as specified and directed. | | 1 | EACH |
|---|
| 87 | 87 | S & F vitreous china wash down water closet pan (pedestal pattern) white with integral foot rest with ‘P’ or ‘S’ trap (excluding flushing cistern and flush pipe) including all fitting with seat cover complete all as specified and as directed. | | 1 | EACH |
|---|
| 88 | 88 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. | | 1 | EACH |
|---|
| 89 | 89 | S&F in repairs Vitreous China urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed. | | 1 | EACH |
|---|
| 90 | 90 | S&F PVC low level flushing cistern white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers complete all as specified and directed. | | 1 | EACH |
|---|
| 91 | 91 | S&F in repairs soap dish, vitreous China white, approximate size (160x 160x90)mm complete all as specified and directed. | | 1 | EACH |
|---|
| 92 | 92 | S & F vitreous China wash basin, white, flat back, size 630x450mm including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed. | | 1 | EACH |
|---|
| 93 | 93 | Supply and fix 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | | 1 | EACH |
|---|
| 94 | 94 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed | | 2.3 | X RM |
|---|
| 95 | 95 | E/M WORK | | | |
|---|
| 96 | 96 | Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) | | | |
|---|
| 97 | 96.01 | One light/fan point controlled by one, one way switch | | 19 | POINT |
|---|
| 98 | 96.02 | One socket outlet 5 Amps 5 pin on independent board | | 13 | POINT |
|---|
| 99 | 96.03 | One socket outlet 5 Amps 5 pin on same board with other switches | | 2 | POINT |
|---|
| 100 | 97 | All as per item No. 96 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed. | | 2 | POINT |
|---|
| 101 | 98 | S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed. | | 44 | EACH |
|---|
| 102 | 99 | S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed. | | 2 | EACH |
|---|
| 103 | 100 | S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed. | | 15 | EACH |
|---|
| 104 | 101 | S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed. | | 2 | EACH |
|---|
| 105 | 102 | S&F Ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified and directed. | | 19 | EACH |
|---|
| 106 | 103 | S&F modular white cover with frame for fixing of 12 module. | | 3 | EACH |
|---|
| 107 | 104 | S&F modular white cover with frame for fixing of 4 module. | | 15 | EACH |
|---|
| 108 | 105 | S&F modular white cover with frame for fixing of 2 module. | | 2 | EACH |
|---|
| 109 | 106 | S&F blank spacer plate for single module. | | 4 | EACH |
|---|
| 110 | 107 | S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed. | | 5 | EACH |
|---|
| 111 | 108 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.\n(Make: Havells cat part No. DHDPSHODRW 08 or as per list approved makes enclosed hereinafter) | | 1 | EACH |
|---|
| 112 | 109 | S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. | | 1 | EACH |
|---|
| 113 | 110 | S&F MCB single pole 06 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. | | 6 | EACH |
|---|
| 114 | 111 | S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed. | | 1 | EACH |
|---|
| 115 | 112 | S&F basic all purpose surface & wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all accessories internally pre-wired, 20W, 6500K, 240V and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \n(Make: Havells Lumiline Cat No.LUMILINEBS20WLED865SPCWH or equivalent in Philips/ Bajaj/ Crompton) | | 10 | EACH |
|---|
| 116 | 113 | S&F LED bed light, 10W bright light output of 800 lumens with LED lamp and switch. (Make:- Philips Bright line, Havells, Bajaj, CG, Wipro) | | 10 | EACH |
|---|
| 117 | 114 | S & F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two no 900 bends. M.S. hook and stay or guy. complete all as specified and directed. | | 1 | EACH |
|---|
| 118 | 115 | S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm 2 Core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all as directed. | | 85 | RM |
|---|
| 119 | 116 | S&F metal exhaust fan AC single phase 230 volts of size 300mm sweep with louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting complete all as specified and directed. (Make: Crompton Greaves,khaitan, Havells,Orient,Bajaj) | | 2 | EACH |
|---|
| 120 | 117 | S&F ceiling fans 1200 mm sweep, 240 Volts, 50HZ, 3 blade with standard super silent motor including provision of 3 core flexible copper conductor cable of size 23/0.19 from ceiling rose to ceiling complete fixing arragement etc complete all as specified and directed. (Make: Havells Cat No. SS 390 or equivalent in Usha/Havells/ Bajaj/ Orient) | | 5 | EACH |
|---|
| 121 | 118 | S&F LED building security light fitting made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP66 protection, 20W, 2200lm, 240V including suitable size of wall bracket and electrically connecting up complete all as specified and directed. (Make: Crompton Cat No. LSTS-20-CDL-M or equivalent model in Bajaj/Philips/Havells) | | 2 | EACH |
|---|
| 122 | 119 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: GI Earthing lead upto 7.5m in length is deemed to be included in the unit rate. The lead required beyond 7.5m shall be measured and paid for separately) | | 1 | EACH SET |
|---|
