Military Engineer Services-MES has published Provision Of Oxygen Pipe System And Vaccum ( Central Supply ) In Emergency Room Of Mi Room Surgical Ward And Ortho Ward At 7 Afh Kanpur Cantt. Submission Date for this Tender is 24-12-2020. Gas Pipe Line Tenders in Chakeri Kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 17-Dec-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-12-2020 |
Name of Work: PROVN OF OXYGEN PIPE SYSTEM AND VACCUM (CENTRAL SUPPLY) IN EMERGENCY ROOM OF MI ROOM, SURGICAL WARD & ORTHO WARD AT 7 AFH KANPUR CANTT | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | B/R Works\nM&L brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radios built in CM 1:6 complete all as specified and directed. | 16 | Cum | |
2 | 2 | M & L, 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floor laid in alternate bays, surface finished even & fair to receive floor tiles complete all as specified and directed. | 18 | SQM | |
3 | 3 | M&L machine cut kota stone slab flooring 20-22mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 15mm thick screed bed or bedding layer in CM (1:6) complete all specified and directed. | 18 | SQM | |
4 | 4 | M&LKota stone slab in skirting dodo or riser with 20-22 mm thick laid over rendering 10mm thick in CM (1:3) on vertical surfaces finished fair and rough to receive the kota stone slab complete all as specified & directed. | 2.4 | SQM | |
5 | 5 | M & L mild steel bars ,TMT , 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. | 20 | KG | |
6 | 6 | M & L RCC type B-0: 1:2:4 (Nominal mix) using 12.5 mm graded stone aggregate as in beam lintel over 1.5m clear span, kerb, cill, steps, parapets railings water troughs, coping, benching and the like, rounded or chamfered on edges inlcuding necessary form work complete all as specified and directed. | 0.06 | CUM | |
7 | 7 | S&F plain solid straight chowkats and frames wought framed rebated on the solid rounded or chamfered put together with glue pinned at joints (IInd class hard wood) complete all specified and directed.\n | 0.08 | Cum | |
8 | 8 | S&F mild steel hold fast and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed. | 10 | KG | |
9 | 9 | S&F flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides (30mm thick) complete all as specified and directed. | 4 | SQM | |
10 | 10 | S&F ordinary rat tail rod pattern springs including roller and roller plate 375 mm (mild steel) complete all as specified and directed. \n | 2 | EACH | |
11 | 11 | S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. | 4 | EACH | |
12 | 12 | S&F aluminium alloy, anodised 300mm long sliding door botl with hasp, staple (bolt type) and fixcing cilps of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed | BI01010001010000000000000515BI0100001113 | 2 | EACH |
13 | 13 | S&F, 150mm size extruded aluminium alloy handles, fabricated type anodished complete all as specified and directed. | 4 | EACH | |
14 | 14 | S&F, butt hinges100mm size, mediumweight, cold rolled mild steel complete all as specified and directed. | 6 | EACH | |
15 | 15 | M & L PCC 1:3:6 type C-1 using 20mm graded stone aggregate for fixing of hold fast complete all as specified and directed. | 0.2 | Cum | |
16 | 16 | M&L 100mm thick PCC 1:2:4 type B-2(using 40mm graded stone aggregate) as in sub base in floor complete all as specified and directed. | 20 | SQM | |
17 | 17 | M&L preparation of newly ,untreated wooden or wooden based surfaces of any description ,not otherwise decribed over 10cms width or girth and applying two coats of synthetic enamel paint over a coats of pink primer complete all as specified and directed. | 6 | SQM | |
18 | 18 | M&L preparation of newly, untreated steel surfaces of any description over 10 cms width or girth and applying two coats of synthetic enamel paint over a coats of red oxide primer complete all as specified and directed. | 10 | SQM | |
19 | 19 | M&L rendering 15mm thick in cement mortar 1:6 on stone masonary or fair faces of brick work or concrete surfaces of wall ,including finishing even and smooth without using extra cement complete all as specified and directed. | 40 | SQM | |
20 | 20 | M&L rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces of wall ,including finishing even and smooth without using extra cement complete all as specified and directed. | 40 | SQM | |
21 | 21 | M&L preparation of new plastered surafce of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed | 40 | SQM | |
22 | 22 | M&L preparation of plastered surface of walls and applying a layer of 3mm thick wall care putty including rubbing and making smooth surface complete all as specified and directed | 40 | SQM | |
23 | 23 | M&L preparation of new surfaces of walls and applying two coats of oil bound distemper over a coat of alkalie resistant primer complete all as specified and directed. | 40 | SQM | |
24 | 24 | Demolition of cement Concrete (unreinforced) in ground floors & pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. | 1.2 | CUM | |
25 | 25 | S&F coloured galvalume profile sheet in roofing shall be with feed material manufactured from 0.50 mm (minimum) base metal thickness (BMT), minimum 550 MPa yield strength and shall confirm to physical specifications of ASTM-792 or equivalent. colour coated galvalume sheet shall have maximum pitch of 250 mm C/C and minimum 28 mm crest depth in length as per site requirement. The steel sheet shall be coated with hot dip metallic Aluminium Zinc alloy (55% Aluminiumm, 43.5% Zinc, 1.5% silicon) coating AZ 150 as 150 gm/Sq. mt total on both sides. The contractor shall submit manufacturer test certificates for the chemical and mechanical properties, confirming genuinity of materials including base metal thickness paint thickness and AZ 150 coating thickness must be submitted for approval to GE prior to the installation / fixing. The manufacturer of sheet should submit related documents for expected product service performance of pre painted metal sheet as per relevant ASTM/ IS. Manufacturer?s recommended installation methodology shall be adopted for installation of roofing including profiled sheet, capping, trims, flashings, gutter and all types of accessories considered for roofing. Fastener shall be used for fixing roofing system as per manufacturer?s recommendation. The painting shall be coloured baked enamel super durable polyester with silicon coating of film thickness of minimum 25 micron (including primer) on top and minimum 10 micron (including primer) on interior face. The paint shall be of shade as approved by GE. The sheet shall have wide pans with minimum 2 (TWO) small stiffening ribs for effective water shedding and special male/ female ends with full return legs on laps for purlin support and fixed with self-driling screws as per manufacturers instructions completed all as specified and directed.”\nNote : Total thickness of sheet with BMT , AZ 150 coating and panting shall be minimum 0.575 mm thick. If 0.575 mm thickness sheet is not available in market then next higher thickness of sheet shall be applicable without any price adjustment. | 26 | SQM | |
26 | 26 | S&F rolled mild steel sections as in main & cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guide for sliding doors, fixed with angle cleats or other connecting plates of Grade Fe 410S (Gde E-250) complete all as specified and directed | 200 | KG | |
27 | 27 | M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed complete all as specified and directed. | 2 | CUM | |
28 | 28 | E/M Works\nSupply, installation, testing and commissioning of (4+4) Oxygen manifold system with 8 Nos of non return valve and copper pipe connection to ensure uninterrupted oxygen supply during change of oxygen cylinders complete all as specified and directed. | 2 | EACH JOB | |
29 | 29 | Supply, installation, testing and commissioning of (1+1) emergency manifold with non return valve for oxygen supply with Double ISI marked /EAB make pressure regulator complete all as specified and directed. | 2 | EACH JOB | |
30 | 30 | Supply, installation, testing and commissioning of Semi Automatic oxygen control panel to regulate gas at constant pressure from either back of the manifold system complete all as specified and directed. | 2 | EACH JOB | |
31 | 31 | Supply, installation, testing and commissioning of medical grade copper pipe line solid , drawn seamless deoxidised , manufactured as per BS-2871, Part-I, Table -X of 1971 and chemical composition as per BS-6017 of 1981 table-2 CU DHP, of size given below:-\n(a) 22mm x 0.9mm | 245 | RM | |
32 | 31.01 | (b) 15mm x 0.9mm | 335 | RM | |
33 | 31.02 | (c) 12mm x 0.7mm | 66 | RM | |
34 | 32 | Supply, installation, testing and commissioning of Bed Head Panel of3 feet size made from high strength extruded aluminium, anodized and powder coated and built to house Gas and Electrical outlets Each Bed Head Panel is provided with the following services in each panel:-\n(a) Oxygen outlet point - 02 Nos\n(b) Vacuum outlet point- 01 No\n(a) 5/15 Amp electrical sockets - 02 Nos\n( 13 Nos -3 feet long )\n\n\n | 13 | EACH | |
35 | 33 | Supply, installation, testing and commissioning of Oxygen outlet points CE marked front loaded for Bed Head panel complying IS-12827 of 1989 (ISO-7396, 1987) and will have Non-interchangeable probe connection complete all as specified and directed. | 45 | EACH | |
36 | 34 | Supply, installation, testing and commissioning of Digital Area Alarm system with audiovisual Alarm for two gases complete all as specified and directed. | 3 | EACH | |
37 | 35 | Supply, installation, testing and commissioning of Back Flow compensated flow meter with humidifier bottle flow range 0-15 litre/minute complete all as specified and directed. | 25 | EACH | |
38 | 36 | VACCUM SYSTEM\nM&L central vacuum system of vacuum pump (Model- V-235 Ingersoll Rand Make) with 5 HP three phase electrical motor fitted on heavy base frame with silencer Non-return valve, vacuum control switch and Vacuum Reservior tank of 1000 litre capacity made of 6mm thick MS plate and tested at 15kg/cm2 pressure with drain valve, Electrical control panel for 5 HP vacuum machine with cascading and duplexing system etc complete all as specified and directed. \n | 2 | EACH JOB | |
39 | 37 | Supply, fixing, testing and commissioning of Ward vacuum unit with 1000ml polycarbonate collection Jar including stainless steel clamp to hold ward vacuum unit to the wall complete all as specified and directed. | 12 | EACH | |
40 | 38 | Supply and fixing of Low pressure tube for suction unit with required hose pipe clips etc complete all as specified and directed. | 45 | RM | |
41 | 39 | Supply & Fix XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross section 50 sq mm 3.5 core ,laid in trenches/ducts /encased in GI pipe /fixed to wall with clamp etc complete all as specified and directed. | 100 | RM | |
42 | 40 | S&F MCCB 4 Pole, 16KA, 100 Amps fixed type with sheet metal enclosures factory fabricated complete all as specified and directed. | 2 | EACH | |
43 | 41 | Excavation in trenches not exc. 1.5 mtr wide and exc. 1.5 mtr in depth for laying of UGcable and getting out in soft/ loose soil complete all as specified & directed.\n | 22 | Cum | |
44 | 42 | Returning, filling in, including, spreading, leveling, watering & well ramming in layers not exceeding 25 cm thick after testing of cable complete all as specified & directed. | 13 | Cum | |
45 | 43 | Removing excavated soil/demolished material not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 metre above starting point complete all as specified and directed. | 9 | Cum | |
46 | 44 | M&L spreading dry Ganga sand for cushioning for laying UG cable in trenches complete all as specified and directed.\nNote:- Punned thickness shall only be measured. | 8 | Cum | |
47 | 45 | M&L sub class 'B' bricks, well burnt old size in trenches for cabple protection of LT cables complete all as specified and directed. | 696 | Each | |
48 | 46 | S&F valve box for 2 gas line complete all as specified and directed. | 1 | EACH | |
49 | 47 | S&F valve box for 3 gas line complete all as specified and directed. | 1 | EACH | |
50 | 48 | S&F Ball valve 12mm dia with adopter complete all as specified and directed. | 30 | EACH | |
51 | 49 | S&F oil free air compressor 05 HP mounted on 220 Ltr tank alongwith motor 5 HP 3 phase autocut switches complete all as specified and directed.\n | 2 | EACH JOB | |
52 | 50 | Supply, installation, testing and commissioning of heartless Air Drier with pre and post filters and auto drain valve complete all as specified and directed.\n | 2 | EACH JOB |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail