Repair Maintenance Replacement Of Internal Electrification Fittings Fixtures And Connected Accessories In Otm And Md Accn At Phase 1 Rupa Area Of Age Em Under Ge 859 Ews
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Dec 2020
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TENGA VALLEY → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Maintenance Replacement Of Internal Electrification Fittings Fixtures And Connected Accessories In Otm And Md Accn At Phase 1 Rupa Area Of Age Em Under Ge 859 Ews
BOQ
| Nature of Work : REPAIR/ MAINTENANCE/ REPLACEMENT OF INTERNAL ELECTRIFICATION, FITTINGS, FIXTURES AND CONNECTED ACCESSORIES IN OTM AND MD ACCN AT PHASE-1 (RUPA AREA) OF AGE E/M UNDER GE 859 EWS | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down copper/aluminium point wiring (light, Bell, fan, socket or power) complete and removing material to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of wall /ceiling so as to match with the existing finishes complete all as specified and as directed. | 610 | Per Point | |
| 2 | 2 | M&L for Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top cover along with copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete for one light / fan / bell point controlled by one switch 5/6 Amp. | 400 | Per Point | |
| 3 | 3 | All as per Srl Item No. 2 here-in-before but for one 3 pin socket outlet 5/6 Amps controlled by one switch on the same board with other switches. | 80 | Per Point | |
| 4 | 4 | All as per Srl Item No. 2 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one switch independent board. | 80 | Per Point | |
| 5 | 5 | All as per Srl Item No. 2 here-in-before but for one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 4.0 Sqmm as continous earth wire connected to common earth and earth dolly. | 50 | Per Point | |
| 6 | 6 | M&L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including taking down unserviceable one and making good to disturbed surfaces complete all as specified and directed. \n\nNOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one unit. | 100 | RM | |
| 7 | 7 | M&L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including taking down unserviceable one and making good to disturbed surfaces complete all as specified and directed. \n\nNOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one unit. | 100 | RM | |
| 8 | 8 | S&F switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. | 380 | Each | |
| 9 | 9 | S&F switch socket combination 2 in 1, 3 pin, 6 Amp piano flush type (ISI marked), 240 Volts complete all as specified & directed. | 160 | Each | |
| 10 | 10 | S&F switch socket combination 2 in 1, 3 pin, 16/15 Amp piano flush type (ISI marked), 240 Volts complete all as specified & directed. | 50 | Each | |
| 11 | 11 | S&F bell push piano type one way 5/6 Amp, 240 volt complete all as specified & directed. | 20 | Each | |
| 12 | 12 | S&F ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals including taking down unserviceable one complete all as specified & directed. | 144 | Each | |
| 13 | 13 | S&F lamp holder insulated body with back plate suitable for batten fittings including taking down unserviceable one complete all as specified & directed. | 216 | Each | |
| 14 | 14 | S&F bell electric AC 240 volt, 50 HZ complete all as specified & directed. | 20 | Each | |
| 15 | 15 | Fixing only LED Tube Light Fitting on mounting casing box 2 Nos including taking down old / unserviceable one complete all as specified and directed. Note :- LED Tube Light Fittings will be issued under Sch 'B' free for fixing. | 144 | Each | |
| 16 | 16 | S&F Wall mounted Mirror light LED fitting, 14/11 Watt, 2 Feet long incl integrated electronic driver including dismantling taking down unsv fitting any type complete all as specified and directed. Make : Havells/Philips/Bajaj/CG/Eveready | 15 | Each | |
| 17 | 17 | S&F Square shaped recess/suspended mounted environment friendly new generation asthetically ultra modern with high brightness LEDs as light source LED Flat panel, 42 watt, 2'x2'size, complete with driver and all accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed. Make: Havells Cat Part No PLUTONEO2X2PLR42WLED840S or equivalent in Philips/Bajaj/CG/Eveready | 15 | Each | |
| 18 | 18 | S&F round shaped recess mounted slim fit down lighter having latest edge lit LED techonology environment friendly, 18 watt complete with driver and all accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismantling taking down unsv fitting any type complete all as specified and directed. Make: Havells Cat Part No EDGEPRORDDLR18WLED840S or equivalent in Philips/Bajaj/CG/Eveready | 15 | Each | |
| 19 | 19 | S&F round shaped surface mounted LED down lighter with white powder coated aluminium housing with intigerated driver, 18 watt complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismantling taking down unsv fitting any type complete all as specified and directed. Make: Havells Cat Part No ENDURANEOHESURFACEDLS18WLED840S or equivalent in Philips/Bajaj/CG/Eveready | 15 | Each | |
| 20 | 20 | S&F LED building security light 30 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable incl dismantling taking down unsv fitting any type complete all as specified and directed. \nMake: Havells Cat Part No ENDURA PEARL SL 30W LED 757 SASYTOPCMP or equivalent in Philips/Bajaj/CG/Eveready | 40 | Each | |
| 21 | 21 | S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10W including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including taking down unserviceable one complete all as specified and directed. Make : Havells- Cat Part No LHEOAOP7UZ6W010 or equivalent in Philips / Bajaj / CG/ Eveready | 20 | Each | |
| 22 | 22 | Fixing only LED Bulb including taking down old / unserviceable one complete all as specified and directed. Note :- LED Bulb will be issued under Sch 'B' free for fixing. | 216 | Each | |
| 23 | 23 | S&F MCB DB CRCA sheet powder coated vertical type TPN 6 way double door factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables incl taking downt existing unsv DB of any size and making good distrubed surface to match with existing complete all as specified and as directed. \n | 2 | Each | |
| 24 | 24 | S&F MCB DB CRCA sheet powder coated SPN 4 way single door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables including taking out existing unserviceable DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. | 5 | Each | |
| 25 | 25 | S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. | 10 | Each | |
| 26 | 26 | S&F MCCB 100 Amps, Four Pole, 25 KA 415 Volt including taking down unserviceable one complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand | 2 | Each | |
| 27 | 27 | S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve including taking down unserviceable one complete all as specified and as directed. | 25 | Each | |
| 28 | 28 | S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts including taking down unserviceable one complete all as specified and as directed. | 70 | Each | |
| 29 | 29 | S&F MCB isolator TPN having braking capacity 63 Amps 415 volts, 50 Hz including taking down unserviceable one complete all as specified and as directed. | 11 | Each | |
| 30 | 30 | S&F PVC insulated PVC sheathed copper flexible wire multistrand 4 sqmm 3 core, ISI marked, FRLS grade including taking down old unsv one all as specified and directed. \n | 50 | Each | |
| 31 | 31 | S&F in repair thermostat ISI marked suitable for geysers 25 Ltrs to 50 Ltrs Capacity complete all as specified and directed. | 10 | Each | |
| 32 | 32 | S&F in repair fusible plug ISI marked suitable for 25 to 50 ltrs capacity Geysers complete all as specified and directed. | 10 | Each | |
| 33 | 33 | S&F in repair heating element ISI Marked round/triangular bas, push type or thread type including rubber washers for 1.5/2.0 KW suitable for 25 to 50 ltr capacity Geysers complete all as specified and directed. | 25 | Each | |
| 34 | 34 | S&F in repair innner water container ISI Marked made of stainless steel, vertical or horizontal type suitable for existing 25 ltr capacity geyser complete all as specified and directed. | 5 | Each | |
| 35 | 35 | S&F in repair outer body container ISI Marked, vertical or horizontal type suitable for existing 25 ltr capacity geyser complete all as specified and directed. | 5 | Each | |
| 36 | 36 | S&F in repair innner water container ISI Marked made of stainless steel, vertical or horizontal type suitable for existing 50 ltr capacity geyser complete all as specified and directed. | 5 | Each | |
| 37 | 37 | S&F in repair outer body container ISI Marked, vertical or horizontal type suitable for existing 50 ltr capacity geyser complete all as specified and directed. | 5 | Each | |
| 38 | 38 | S&F in repair apparatus plate ISI marked suitable for vertical/horizintal type Geyser 25 to 50 ltr cap complete all as specified and directed. | 5 | Each | |
| 39 | 39 | S&F in repair heavy duty PVC connections pipe with brass hexagonal adoptersat both side 15mm dia and 450mm long for hot /cold water all as specified and directed. | 28 | Each | |
| 40 | 40 | M&L for Rewinding of Exhaust fan 250/300 mm sweep after dismenting complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, vernishing, replacement of unsv bearings / bushings, blades and testing complete. \nNote: 1. Contractor will collect fans from the complaint cells of specified area and bring back to complaint cell after repair. Cost of transportation will be inclusive of quoted rate.\n2. Spares require for replacement such as bearing, blade, capacitor, shall be measured and paid separately as supply only. \n | 7 | Each | |
| 41 | 41 | Supply only ball bearing of size 6201/6202/6203 suitable for exhaust fan 250/300 mm sweep as per manufacture instruction complete all as specified and directed. | 7 | Each | |
| 42 | 42 | Supply only fan condensor cap 1/1.8 MFD suitable for exhaust fan 250/300 mm sweep as per manufacture instruction complete all as specified and directed. | 7 | Each | |
| 43 | 43 | Supply only louvers suitable for exhaust fan 250/300mm sweep with necessary fixing arrangement complete all as specified and directed. | 7 | Each | |
| 44 | 44 | S&F Exhaust fan motor suitable for exhaust fan 250/300 mm sweep as per site requirement complete including necessary fixing complete all as specified and directed. | 7 | Each | |
| 45 | 45 | S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm, 2 core and overall PVC sheathed in service connections including taking down old unserviceable one all as specified and directed. | 1000 | RM | |
| 46 | 46 | M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and as directed. \nNote:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made. | 2 | Each Set |
AI Tender Summary
Tender Timeline
Nov 20, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 04, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender