GLOVES COTTON 14\" (200 GSM COTTON ) WITH DOUBLE STITCHING
item1
2500
PAIR
3
1.02
GLOVES RUBBER 12\" MADE OUT OF SUPERIOR QUALITY\nRUBBER\n,ACID/ALKALI RESISTANT WHICH IS HAVING GOOD GRIP IN\nWET AND OILY ENVIRONMENTS;IT SHALL BE LIGHT WEIGHT,\nCUT/ ABRASION RESISTANT. IT SHALL HAVE THE APPROVAL/MARKING OF INDIAN/INTERNATIONAL STANDARDS.[EN- 374 EN-388[4121]
item2
600
PAIR
4
1.03
GLOVES RUBBER 16\" MADE OUT OF SUPERIOR QUALITY\nRUBBER\n,ACID/ALKALI RESISTANT WHICH IS HAVING GOOD GRIP IN\nWET AND OILY ENVIRONMENTS;IT SHALL BE LIGHT WEIGHT,\nCUT/\nABRASION RESISTANT. IT SHALL HAVE THE APPROVAL/MARKING OF INDIAN/INTERNATIONAL STANDARDS.[EN-374 EN-3 88[4121]
item3
500
PAIR
5
1.04
GLOVES PVC UNSUPPORTED 14\"[\nHEAVY DUTY PVC GLOVES HAVING GOOD FLEXIBILITY AND\nELASTICITY EVEN\nAT LOW TEMP;IT SHALL BE RESISTANCE TO ACIDS CAUSTICS\nAND SOLVENTS;IT\nSHALL HAVE THE APPROVAL OF ISI/CE APPROVED\n[EN-374 EN-388 APPROVAL OR SHALL POSSESSS RELEVANT\nTEST CERTIFICATE FROM ANY GOVERNMENT/STATUTORY BODY
item4
250
PAIR
6
1.05
HEAT SHIELD HAND GLOVES LEATHER 14\"[THE LEATHER HAND\nGLOVES SHOULD HAVE COTTON/DENIM LINING TO ARREST\nDIRECT CONTACT OF THE SKIN\nWITH LEATHER AT ANY POINT OF TIME,AND SHALL BE STICHED\nWITH NOMEX TREADS;IT SHALL HAVE GOOD SNAGS,CUT,\nABRASION AND PUNTURES RESISTANCE;IT SHOULD HAVE\nREINFORCED PALM STRIP FOR BETTER PROTECTION WITH\nEXCELLENT DRY DRIP AND GOOD COMFORT;IT SHALL\nCONFIRM TO IS6994 PART[1] AND ISI\nMARKED OR ANY INTERNATIONAL STANDARDS ,CERTIFICATION\nOR MARKING
item5
10
PAIR
7
1.06
GLOVES NON ASBESTOS 14\"\nHEAT RESISTANT HAND GLOVES, MADE OF NON ASBESTOS\nMATERIAL\nHAVING BACK NON-WOVEN FELT INSULATION TO PROTECT\nBACK\nOF HAND AGAINST RADIANT HEAT. IT SHALL GIVCE A FULL\nLENGTH\nHEAT BARRIER TO PROTECT THE HAND, IT SHALL GIVE\nBETTER\nFINGER COMFORT, DEXTERITYAND SHALL GIVE PROTECTION\nAGAINST\nSNAGS ,PUNCTURES, ABRASION AND CUTS AND SHALL HAVE\nDRY GRIP\nIT SHALL BE CAPABLE OF GIVING A HEAT PROTECTION OF\nMINIMUM\n250 DEG. GLOVES SHALL BE CE APPROVED,CONFORMING TO EN407 OR TO ANY RELEVANT /INTERNATIONAL STANDA RDS AND MARKING. THE GLOVES SHALL BE OF LENGTH 14\"
item6
10
PAIR
8
1.07
GLOVES RUBBER 14\" MADE OUT OF SUPERI0R QUALITY\nRUBBER\nACID/ALKALI RESISTANT WHICH IS HAVING GOOD GRIP IN\nWET AND OILY ENVIRONMENTS.IT SHALL BE LIGHT WEIGHT.\nCUT/ABRASION RESISTANT;IT SHALL HAVE THE APPROVAL\n/MARKING\nOF INDIAN/INTERNATIONAL STANDARDS[EN374 EN-388[4121]\n]
item7
500
PAIR
9
1.08
PANTS PVC ELASTIC AT WAIST FOR BETTER FITTING. ALL\nSEAMS\nTO BE ULTRASONICALLY WELDED THE ABOVE ITEM SHALL\nHAVE\nEN/IS MARKING OR THE MATERIAL SHALL BE TESTED AND\nCERTIFIED BY\nGOVERNMENT/GOVT APPROVED AGENCIES\nACID&ALKALI PROOF
item8
25
Numbers
10
1.09
COAT PVC-FULLY WELDED5 ACID&ALKALI PROOF. THE\nMATERIAL\nSHALL BE MADE OF EXCELLENT FABRIC AND SHALL BE\nDURABLE\nAND HYPOALLERGENIC; IT SHALL POSSESS RELEVANT TEST\nCERTIFICATE FROM ANY GOVERNMENT/STATUTORY BODY.\nCOAT SHOULD\nBE DESIGNED WITH OVERLAPPING ZIP ARRANGEMENT FOR\nCOMPLETE CHEMICAL\nPROTECTION.ALL SEAMS TO BE ULTRASONICALLY WELDED.\nTHE SLEEVES SHOULD BE\nPROVIDED WITH DOUBLE CUFF DESIGN TO ENABLE LIGUID\nTIGHT\nPROTECTION ALONG WITH CHEMICAL GLOVES.THE COAT\nSHOULD BE PROVIDED\nWITH ELASTIC WAIST FOR BETTER FITTING AND SHALL HAVE EN/IS MARKING OR THE MATERIAL SHALL BE TESTED AN D CERTIFIED BY GOVT/GOVT APPROVED AGENCIES
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
