| 1 | 1 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position.\nSal wood\nprincipal chamber room and stair case | BI01010001010000000000000515BI0100001113 | 0.135 | Cum |
|---|
| 2 | 2 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In Charge.\nLocal Teak wood\n35 mm thick shutters | BI01010001010000000000000515BI0100001114 | 14.4 | sqm |
|---|
| 3 | 3 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nurts and screws etc. complete \n300 x 16 mm | BI01010001010000000000000515BI0100001115 | 18 | nos |
|---|
| 4 | 4 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nurts and screws etc. complete \n300 x 10 mm | BI01010001010000000000000515BI0100001116 | 28 | nos |
|---|
| 5 | 5 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. \n125mm | BI01010001010000000000000515BI0100001117 | 26 | nos |
|---|
| 6 | 6 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer | BI01010001010000000000000515BI0100001118 | 3479.48 | Sqm |
|---|
| 7 | 7 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade over an under coat of suitable shade with ordinary paint of approved brand and manufacture. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | BI01010001010000000000000515BI0100001119 | 123.12 | sqm |
|---|
| 8 | 8 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. | BI01010001010000000000000515BI0100001120 | 127.2 | mtr |
|---|
| 9 | 9 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:\n Float glass panes of thickness 4 mm Sqm. | BI01010001010000000000000515BI0100001121 | 194.88 | sqm |
|---|
| 10 | 10 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:-\nWith cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001122 | 3078.56 | sqm |
|---|
| 11 | 11 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineerin- Charge.\n75mm average thickness | BI01010001010000000000000515BI0100001123 | 425.94 | Sqm |
|---|
| 12 | 12 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and as per direction of Engineer-In-charge complete in all respect. [Payment shall be made after submission of the product performance shall carry guaranteed for 10 years against any leakage]\nEpoxy bonding adhesive having coverage 2.20 sqm/kg of approved make | BI01010001010000000000000515BI0100001124 | 444.54 | Sqm |
|---|
| 13 | 13 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | BI01010001010000000000000515BI0100001125 | 506.2 | Sqm |
|---|
| 14 | 14 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. | BI01010001010000000000000515BI0100001126 | 798.58 | Sqm |
|---|
| 15 | 15 | Applying two coats of cement based water proofing slurry @ 2.75 kg per sqm by mixing SIKA LATEX POWDER or equivalent water proofing compound at the rate of 1:4:7 (1 SIKA LATEX POWDER or equivalant : 4 water : 7 Cement) by volume and carring the surface with sprinkling water for 3 to 5 days after application of slurry as per direction of the Engineer-in-Charge | BI01010001010000000000000515BI0100001127 | 108.75 | sqm |
|---|
| 16 | 16 | Grading roof for water proofing treatment complete as required\nCement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001128 | 8.7 | Cum |
|---|
| 17 | 17 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :\nOne urinal basin with 5 litre white P.V.C. automatic flushing cistern. | BI01010001010000000000000515BI0100001129 | 8 | Each |
|---|
| 18 | 18 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require\nWhite Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. | BI01010001010000000000000515BI0100001130 | 12 | Each |
|---|
| 19 | 19 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete\n10 litre capacity-White | BI01010001010000000000000515BI0100001131 | 12 | Each |
|---|
| 20 | 20 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.\nFlexible pipe\n40 mm dia | BI01010001010000000000000515BI0100001132 | 12 | Each |
|---|
| 21 | 21 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001133 | 12 | Each |
|---|
| 22 | 22 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter\n 100mm | BI01010001010000000000000515BI0100001134 | 6 | Each |
|---|
| 23 | 23 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\n Single socketed pipe - 110 mm OD | BI01010001010000000000000515BI0100001135 | 40 | Mtr |
|---|
| 24 | 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.\nInternal work - Exposed on wall.\na) 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001136 | 75 | mtr |
|---|
| 25 | 24.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.\nc) 25 mm dia. nominal bore | BI01010001010000000000000515BI0100001137 | 82.5 | Mtr |
|---|
| 26 | 25 | Providing and fixing PTMT bib cock of approved quality and colour.\n15mm nominal bore, 86 mm long, weighing not less than 88 gms | BI01010001010000000000000515BI0100001138 | 10 | nos |
|---|
| 27 | 26 | Providing and fixing PTMT stop cock of approved quality and colour.\n15mm nominal bore, 86 mm long, weighing not less than 88 gms | BI01010001010000000000000515BI0100001139 | 10 | nos |
|---|
| 28 | 27 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):\na) 25 mm nominal bore | BI01010001010000000000000515BI0100001140 | 4 | nos |
|---|
| 29 | 28 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001141 | 213.831 | Sqm |
|---|
| 30 | 29 | Providing and laying 1st quality ceramic glazed floor tiles of approved size conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.\nCeramic Glazed Tiles 1st quality 300 x 300mm in all shades and designs | BI01010001010000000000000515BI0100001142 | 793.18 | Sqm |
|---|
| 31 | 30 | Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.\nSize of tile 60x60 cm | BI01010001010000000000000515BI0100001143 | 55.28 | Sqm |
|---|