| 1 | 1 | Providing and fixing Main table Size 1500mm(W) X 750mm(D) X 750mm(H)Primary Work Surface- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Softclosing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel- Made of 25mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under- structure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestal is provided with lock for security. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001113 | 1 | Each |
|---|
| 2 | 2 | Providing & fixing Desk Cum Bench A) Legs: Legs are made of MS ERW tube section (157138) of size 75x25x2 mm thick oval tube with 5 mm thk HR brackets as per IS:2062 and 2mm thk CRCA brackets as per IS-513welded on to the tubes. Assembly is powder coated with epoxy polyester. - Leg height varies from 705 to 1005 in pitch of 50 as per layout. - Sturdy anchoring by anchor bolts on to base of 8mm thk plate for proper resting of Leg**. - Shoe made of ultramid -Nylon are provided at the bottom for covering the base plate. B)Side dads: - Two side clads made of e18 mm thk plate with 0.8mm thk pvc lipping and on the outside covered with welded metal structure made of 2 mm thk CRCA as per 1S-513 powder coated with Epoxy polyester . C)Worktop: - Worktop are made of 25 mm thick Pre-Laminated Board of El-P2 Grade and approved shade conforming to IS:12823:1990. All the edge of work surface are provided with machine pressed 2mm thick pvc edge band glued with hot melt glue. D)Seat: - Seat has self closing mechanism which will operate by means of dead weight . Seat understructure is made from combination of welded fabricated structure of 5mm Thk HR as per IS:2062 and 8mm thk ply as per 1S:303 with moulded PU foam of density 55 kg/cu.mtr. on top which in turn is covered with stitched upholstery made of leatherite as per INT/DSN/MSS/UPH1038 or foam back fabric as per TNT/DSN/MSS/UPH/013. Seat assembly is covered on bottom side by means of seat cover made of pp. E)Seat Back: - Seat back is made from combination of 8mm thk ply as per 15:303 with moulded foam on top which in turn is covered with stitched upholstery made leaterite as per INT/DSN/MSS/UPH/038 or foam back fabric as per INT/DSN/MSS/UPHJ013. F) Seat Support Frame : -Seat support frame is made from combination of MS ERW tube section (IS 7138) of size 80x40x2.5 mm thick rectangular tube and MS ERW tube section(IS 7138), of size 48x19.1x2 mm thick oval tube welded together . Assembly os powder coated with Epoxy polyester. CAP made of ultramid are provided from front to cover the oval tubes. G)Modesty: - Modesty is made of 25mm thick pre-laminated twin board of E1-P2 Grade and approved shade conforming to IS:12823:1990. All the edge of modesty are provided with machine pressed 2 mm Thick pvc edge band glue with hot melt glue. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001114 | 35 | Each |
|---|
| 3 | 3 | Providing and fixing Vertical Filing Cabinets which use less floor space. Size of 2 Drawer VFC shall be 710mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Vertical Filing Cabinets which use less floor space. Size of 2 Drawer VFC shall be 710mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001115 | 5 | Each |
|---|
| 4 | 4 | Providing and fixing High Back chair.The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 47.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The \"S\" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001116 | 2 | Each |
|---|
| 5 | 5 | Providing & fixing 3 seater sofa set.The seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 205.5 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001117 | 5 | Each |
|---|
| 6 | 6 | Providing & fixing 2 seater sofa set.The seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 146.0 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM.Note:- The Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001118 | 7 | Each |
|---|
| 7 | 7 | Providing & fixing Centre Table.It should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001119 | 3 | Each |
|---|
| 8 | 8 | Providing & fixing Visitor chair. The seat is made up of 1.4± 0.1 chick hot - press 4 plywood upholstered with fabric and moulded polyurethane foam. It has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. SEAT SIZE: 50.0cm (W)x 49.0cm(D).The Back is injection moulded in Glass filled Polyamide which is upholstered with Mesh fabric..BACKSIZE: 50.0cm(W) x68.0 cm(H).The polyurethane foam for seat is of density 55± 5kg/m3.The armrest is made of Polyamide strture and polypropylene Housing with moulded PU armtop & Fixed. The inner tube of armrest is chrome plated. Full Back-65(W)* 58.5(D)*97.5(H)* 42.5(SH). Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001120 | 10 | Each |
|---|
| 9 | 9 | Providing & fixing Main Table- 1070 size shall be 1665 Width mm x 900 Depth mm x 725 Height mm.The Top shall be 25 mm thick pre-laminated board with 2 mm thick matching lipping stiffener provided under the top to give addition strength(1.6 mm thick MS).The Understructure shall be having pedestal of combination of processed wood (PLB) and mild steel (MS).There shall be 2 box drawers plus 1 filling drawer combination for both pedestals the pedestal shell shall be 0.8 mm thick MS plus the drawer tray and separator shall be 0.6 mm thick MS.There shall be sleek handles for easy grip , glide screws for leveling and also independent locking arrangement for each pedestal. The Modesty shall be of MS panel (1.0 mm thick) recessed inside for more leg room.Panel is styled with cutouts (windows) to give it a trendy and up market look. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001121 | 2 | Each |
|---|
| 10 | 10 | Providing & fixing High Back chair. The seat/back shall be made up of 1.2 ±0.1cm thick hot pressed plywood method described in and upholstered with fabric and moulded polyurethane foam together with moulded seat and back covers. the back foam shall be designed with contoured lumbar support for extra comfort. the dimensions of back shall be-50.0 cm (w) x 72.0 cm (h) and of seat shall be-50.0 cm (w) x 46.5cm. (d). hi resilience(hr) polyurethane foam: the hr polyurethane foam should be moulded with density 45±2kg/m3-and hardness load 16 ±2 kgf for 25% compression. seat/back covers:the seat cover shall be injection moulded in black co-polymer polypropylene and back cover should be vacuum formed from abs sheets armrests: the one-piece armrests shall be made of black integral skin polyurethane with 50-70 shore 'a' hardness and reinforced with m.s. insert. the armrests shall be scratch and weather resistant tant. the armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. thick hr steel. center tilt mechanism:the center tilt mechanism shall be designed as-360° revolving type, 17° ±2° maximum tilt on pivot at center, upright position locking, tilt tension adjustment. pneumatic height adjustment:the pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cmtelescopic bellow assembly: the bellow shall be 3 piece telescopic type and injection moulded in black polypropylene. pedestal assembly: the pedestal shall be injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal shall be 66.3 ±0.5cm.(76.3±1.0 cm with castors).twin wheel castors;the twin wheel castors shall be injection moulded in black nylon. Overall Dimensions of Chair-Seat Height - min 44.2 to max 54.2cm. Height - min103.3 to max 115.3cm.Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001122 | 2 | Each |
|---|
| 11 | 11 | Providing & fixing High Back chairs with armrest, plastic outer & inner. plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 47.5 cm. (w) x 77 cm. (d) armrests: the product should be Green Guard certified;the armrest top should be moulded from polyurethane(pu), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 stepsactive bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features: • 360° revolving type.• front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• tilt tension adjustment can be operated in seating position.• 5-position tilt limiter giving option of variable tilt angle to the chair.• seat/back tilting ratio of 1: 2• the mechanism housing should be made up of hpdc aluminium black powder coated.4 seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0±0.5 cm. adjustable back support: back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.pneumatic ht. adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.pedestal assembly the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors:the twin wheel castors should be injection moulded in black polypropylene. Overall Dimensions of Chair Seat Height -44.5 to 54.5 cm.Height -114-131.5 cm.Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-66.5 cm Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001123 | 1 | Each |
|---|
| 12 | 12 | Providing & fixing King size Bed. Bed size 109cm(h)* 186.5cm(w)*224.4cm(l).Overall Size : Length - 2246.0 mm.Width - 1865.0 mHeight - 1103.0 mm.Material :Bed Structure consist of metal frames made of M.S. 25 mm square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness.Partition Panels, Bottom Panels, Plinths, drawer back & drawer bottom are made of 25 mm Thick Prelaminated Particle Board.Head board, Tail board, Side board & mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 2 mm thick PVC edge banding. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001124 | 3 | Each |
|---|
| 13 | 13 | Providing & fixing Bed side table 53cm(h)*41.7cm(w)*45.8cm(l).Overall Size : Length - 458.0 mm.Width - 417.0 mm.Height - 550.0 mm.Material :All panels of the side table are made up of 18 mm thick Prelaminated Particle Board with all the exposed edges, edge banded with 2 mm thick PVC edge banding.Drawer bottom panel of the side table is made up of 8 mm thick Prelaminated Particle Board. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001125 | 3 | Each |
|---|
| 14 | 14 | Providing and Fixing King size Mattress . The Thickness of Mattress : 12.5 cm / 15 cmMade of Bonded and Convoluted Foam, it corrects bad sleeping postures and provides differently assigned pressure zones for luxurious sleep. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001126 | 3 | Each |
|---|
| 15 | 15 | Providing & fixing Single Bed. Overall Size of Bed : Length - 2060.0 mm Width - 1131.0 ram Height - 945.0 mm Material Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness. Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board. Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Note:- The furniture Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001127 | 12 | Each |
|---|
| 16 | 16 | Providing & fixing Bed side table.Overall Size : Depth - 450.0 mm Width - 440.0 mm Height - 510.0 mm Material : Body and drawer panels of Bed side table are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it. Hardware : The high quality hardware Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001128 | 12 | Each |
|---|
| 17 | 17 | Providing & fixing Single Bed Mattress. The Thickness of Mattress Thickness: 10 cm It is an ideal choice to counter orthopaedic problems.Its bonded foam gives a good night’s sleep, devoid of any discomfort and backaches. Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001129 | 12 | Each |
|---|
| 18 | 18 | Providing & fixing Dining table. MATERIALS & DIMENSION (+/- 5mm)-DINNING TOP 1750mm(l)* 900mm(w)*22 to 26 mm(h-thickness) LEGS 130mm(l)* 65mm(w) 742mm(h-thickness) OVERALL 1750mm(l)* 900 mm(w)*760mm(h-thickness) METAL MATERIALS : (gauge +/- 0.1mm) Material-BOLT & WASHER WOODEN MATERIALS :SHEESHAM SOLID WOOD COLOR:-Metal part Color:-BLACK.Wooden Part Color:-DARK BROWN Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001130 | 4 | Each |
|---|
| 19 | 19 | Providing & fixing Dining cahir.The Overall Size of Dining Chair :Length : 45cm Width : 45cm Height : 95cm Cushion Seat : Length : 45cm Width : 45cm Height : 50cm METAL MATERIALS : (gauge +/- 0.1mm):Material:NUT & WASHER WOODEN MATERIALS :Material:SHEESHAM SOLID WOOD Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001131 | 16 | Each |
|---|
| 20 | 20 | Providing and Supplying Bed Pillow. The size of Pillow Size ( in cm) : 43 x 69 Note:- The furniture shall be of approved make such as approved source. | BI01010001010000000000000515BI0100001132 | 18 | Each |
|---|
