Directorate Of Municipal Administration-DMA has published Supply Of Safety Materials For Solid Waste Management Workers Of Cmc.Doddaballapur . Submission Date for this Tender is 07-12-2020. Hand Glove Tenders in Karnataka. Bidders can get complete Tender details and download the document.
Sl No | Item Code | Item Name | Item Description | Unit | Quantity |
---|---|---|---|---|---|
1 | 15thBr1 | Supply of Sweeping Broom with Handle | specifications: Specification : Type of Broom Sweeping Broom with Bamboo Strips Material of Handle - Bamboo , Overall weight of Single Broom (gm) -900 to 1000Grams, Overall length of Single Broom (cm) 220-250 Length of Broom Strips (cm) 80-90, Length of Plug / Handle (cm) 150 The sticks shall be free from ruts, insects and be of good quality | No. | 600 |
2 | 15th2 | Supply of Hand Gloves | specifications: Specification :- Base Fabric- Plain Knitted on Palm & Finger and 2X2 rib on cuff Material composition- 80 percentage wool and 20 percentage Nylon, Wool grade (minimum)- 58s, Colour- Light Green, Colour fastness to Washing- Change in colour and staining on adjacent fabric-4 or better, Mass of 10 pairs- 950 gms for Large Width across palm 12 cm for Large , Overall Length 28 cm for Large , Depth of Cuff 7 cm for Large , Total No of Wales 76 for Large | Pairs | 1500 |
3 | 15th3 | SUPPLY OF Face Mask | specifications: Type of mask valve less- Use Single , Mask construction material Entirely inseparable filter material, Weight of single mask (gms) 10 , No of valves No , Foldable -Yes , Nose clip with - Head harness adjustable | Nos | 1500 |
4 | 15th4 | SUPPLY OF Safety Reflective Jacket | specifications: Specification : Reflective Luminous Garments High visibility warning garments with synthetic hook and loop fasteners, Type of garment Waist coat Size Large(L) ( Suitable for person of height 169-175 cm, Chest Girth 108-112 cm, Waist Girth 87-91 cm), Fabrication fabrication of jacket as per drawing and specification | Nos | 400 |
5 | 15th5 | SUPPLY OF Safety GUM Boots | specifications: Specification :Type Type 1 : Ankle boots Variety (based on purpose) Variety 3: for use in general working conditions Design B ( Ankle boot ) , Size ( Paris Point as per 6 to 12 Inches of Fitting ( As per Table 8 and Table 9 of , The upper edges and tongue Binding Without Binding , Resistance to Acid and Alkali No , Resistance to Fuel Oil No Outsole / Heel- Rubber, Colours- Black | Pair | 330 |
6 | 15th6 | SUPPLY OF Mild Steel Spade with handle | specifications: Specification : Type of garden tool- Spade , Material of Blade -Mild Steel , Finish on Blade- Chrome plated, Material of Shaft- Wooden shaft, Type of Handle- Straight Length of Blade in mm tolerance of + or-5mm allowed 250, Mouth Width of Blade in mm tolerance of + or -5mm 160, Thickness of Blade sheet in mm tolerance of + or -5mm 60 Length of shaft in mm (tolerance + or - 25mm) 600, Type of Handle Straight , Resistance to corrosion- Yes, Handle shall be smooth and formed to provide suitable grip- Yes | Nos | 100 |
7 | 15th7 | SUPPLY OF Mild Steel Teeth Type Spade with handle | specifications: Specification :Type of tool- Teeth type Spade , Material of Blade -Mild Steel , Finish on Blade- Chrome plated, Material of Shaft- Wooden shaft, Type of Handle- Straight, Length of Blade in mm tolerance of + or -5mm allowed -250 , Mouth Width of Blade in mm tolerance of + or -5mm -100 , Thickness of Blade sheet in mm tolerance of + or -5mm -40 , Length of shaft in mm (tolerance + or - 25mm) -700 ,Material of Blade Mild Steel , Type of Handle Straight, Resistance to corrosion- Yes, Handle shall be smooth and formed to provide suitable grip- Yes | Nos. | 100 |
8 | 15th9 | SUPPLY OF Push Carts for Street Sweeping ( Wheel type Barrow) | specifications: Specification : Nominal Capacity of Wheel Barrow: 85 Liters (Single Wheel Type Wheel Barrow) , Material used for manufacture: Steel Sheets (Steel sheets shall be not less than 1.60 mm in thickness, Type of chassis frame: Single length of steel tube of 25 mm nominal bore, Wheel Material: MS with solid rubber tyre, Minimum nominal width of tyre (mm) : 50 , Minimum diameter of the wheel (mm): 300 , Minimum bearing length of axle/spindle: 25 mm at each end, Type of bearing / bush: Cast Iron, Maximum clearance between the bearing and axle (mm): 0.5, Finish of metal parts: Two coats of black bituminous paint conforming latest, Finish other than Two coats of black bituminous paint and Galvanized: Yes | Nos | 40 |
9 | 15th8 | SUPPLY OF Grass cutter /Weed Cutter machine | specifications: Specification : Cut Width / Diameter (Maximum) in mm : 400 to 424 , Type of Machine :Line Trimmer with Nylon feed head attachment , Power Source : Petrol Engine , Speed control : Variable Speed, Transmission :Centrifugal Clutch , Tool-free changing of the attachments :Yes, Castor Wheels provided to the feed head : Yes, Handle Type: Bike Style, Type of Harness inclusive in the scope of supply :Double shoulder Strap , Shaft Material: Stainless Steel, Shaft Type : Flexible Shaft, Shaft Length (mm): 1600 to 1649 Shaft Diameter: 26 millimeter, Nylon feed head attachment inclusive in the scope of supply : Yes , Feed head of Line : Trimmer Bump / Tap & go Type , Number of Lines :Double, Blade Cutter attachment inclusive in the scope of supply :Yes, Blade Material: Hardened Steel , Blade Type :2 teeth blade , "Number of 2 teeth Blades inclusive in the scope of supply (May indicate \0\if Not Applicable): 1 , Other Accessories inclusive in the scope of supply Protection glasses , Sound level in dB: 100, Warranty on Equipment:01 year | Nos | 4 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail