| 1 | 1 | Taking down cement plaster on walls of any description including racking out joints, hacking for key scrubbing down with water etc complete al as specified and directed, | | 550 | Sqm |
|---|
| 2 | 2 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 on walls complete all as specified and directed. | | 350 | Sqm |
|---|
| 3 | 3 | M&L for rendering 10mm thick on ceiling surfaces in CM 1:3 complete all as specified and directed. | | 50 | Sqm |
|---|
| 4 | 4 | M&L for rendering 15 mm thick on other than fair faces of brick work in CM 1:6 on walls complete finished even & smooth all as specified and directed. | | 150 | Sqm |
|---|
| 5 | 5 | M&L for preparation of (plastered/unplastered) new surface of walls including cornices and applying three coat of white wash complete all as specified and directed. | | 150 | Sqm |
|---|
| 6 | 6 | M&L for preparation of (plastered/unplastered) new surface of ceiling including cornices and applying three coat of white wash complete all as specified and directed. | | 50 | Sqm |
|---|
| 7 | 7 | M&L for preparation of (plastered/unplastered) new surface of wall and applying two coat of cement base paint complete all as specified and directed. | | 350 | Sqm |
|---|
| 8 | 8 | Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed. | | 7.2 | Cum |
|---|
| 9 | 9 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | | 60 | Sqm |
|---|
| 10 | 10 | Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match | | 50 | Sqm |
|---|
| 11 | 11 | M&L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including cement screed in c m 1:4 complete all as specified and directed. | | 30 | Sqm |
|---|
| 12 | 12 | M&L PCC (1:2:4) type B0 (using 12.5mm graded stone agg )as floors etc incl finishing the concrete surface even and rough of 25mm thickness complete all as specified and directed. | | 110 | Sqm |
|---|
| 13 | 13 | M&L for 20 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) complete all as specified and directed. | | 110 | Sqm |
|---|
| 14 | 14 | M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded agg) as in floors and finished concrete surface even and smooth without using extra cement complete all as specified and directed. | | 50 | Sqm |
|---|
| 15 | 15 | M&L for 38mm wide glass dividing strips, 3mm thick inserted in position conforming to design complete all as specified and directed. | | 35 | RM |
|---|
| 16 | 16 | M&L for 75mm thick cement concrete, type C2, 1:3:6 (using 40mm graded agg) in plinth protection, path etc and finished surface even and smooth without using extra cement complete all as specified and directed. | | 150 | Sqm |
|---|
| 17 | 17 | Taking down chowkats or frames exc. 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames complete all as specified and directed. | | 15 | Each |
|---|
| 18 | 18 | All as per item No 17 above but nexc 1.50 sqm each. | | 18 | Each |
|---|
| 19 | 19 | Taking down Shutter of any description n exc 1 sqm each | | 15 | Each |
|---|
| 20 | 20 | Taking down Shutter of any description exc 1 sqm n exc 2 sqm each. | | 9 | Each |
|---|
| 21 | 21 | M&L for framed work as in doors or gate of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening andfixing complete. | | 160 | Kg |
|---|
| 22 | 22 | S&F Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated factory made 35 mm thick | | 24 | Sqm |
|---|
| 23 | 23 | S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed. | | 12 | Sqm |
|---|
| 24 | 24 | S&F 30mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass gauze etc divided into squares with pain, chamfered or rounded, mitered and rebated sash bars any number and edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, Clause 8.24(b) and fitted to chowkats complete all as specified and directed. | | 14 | Sqm |
|---|
| 25 | 25 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing | | 30 | RM |
|---|
| 26 | 26 | S&F Factory made solid PVC moulded door shutter ,28 to 30 mm thick ( stiles )with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification and drawing . | | 14 | Sqm |
|---|
| 27 | 27 | S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and directed. | | 60 | Each |
|---|
| 28 | 28 | But hinges, extruded aluminium, with mild steel hinge pin, bright polished and fixed, type C-21 100 mm | | 18 | Each |
|---|
| 29 | 29 | S&F 75mm size mild steel butt hinges medium weight, cold rolled complete all as specified and directed. | | 60 | Each |
|---|
| 30 | 30 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. | | 42 | Each |
|---|
| 31 | 31 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300 mm long | | 5 | Each |
|---|
| 32 | 32 | S&F 75 mm size mild steel butt hinges medium weight, cold rolled complete all as specified and directed. | | 32 | Each |
|---|
| 33 | 33 | S&F Aluminium handles, cast type, anodised 150 mm | | 42 | Each |
|---|
| 34 | 34 | S&F Aluminium handles, cast type, anodised 100 mm | | 30 | Each |
|---|
| 35 | 35 | S&F 1st class soft wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labour, articles exc. 200 Cu.cm and n.exc. 500 Cu.cm complete all as specified and directed. | | 10 | Each |
|---|
| 36 | 36 | M &L for Cutting holes into brick walls built in CM, depth exc. half brick but n.exc. one brick for inserting hold fast and making good dismantled portion in CM (1:3) or cement concrete 1:2:4, type B1 as required complete all as specified and directed. | | 60 | Each |
|---|
| 37 | 37 | M&L for mild steel work for small articles such as clamps, hold fasts, ties etc conforming of Fe-290 Gde E-165 complete all as specified and directed. | | 16 | Kg |
|---|
| 38 | 38 | All as per above item but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, ditto | | 60 | 100 Nos |
|---|
| 39 | 39 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified and directed. | | 20 | Sqm |
|---|
| 40 | 40 | All as per item No 39 above but fixed in repair | | 20 | Sqm |
|---|
| 41 | 41 | S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. | | 8 | Sqm |
|---|
| 42 | 42 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded | | 12 | Sqm |
|---|
| 43 | 43 | M&L for Welding in repairs n. exc 2.5cm in length complete all as specified and directed. | | 5 | Each |
|---|
| 44 | 44 | Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed. | | 8 | Sqm |
|---|
| 45 | 45 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed. | | 10 | Sqm |
|---|
| 46 | 46 | M&L for two coats of synthetic enamel paint over one coat of redoxide on newly steel surfaces of any description over 10 cm width or girth incl preparation of Steel surfaces complete all as specified and directed. | | 30 | Sqm |
|---|
| 47 | 47 | Dismantling water tanks and removing to store exc 250 ltr but nexc 500 ltr capacity all as directed. | | 5 | Each |
|---|
| 48 | 48 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 ltrs all as specified in SSR Pt-I. | | 5 | Each |
|---|
| 49 | 49 | S&F Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore | | 5 | Each |
|---|
| 50 | 50 | Taking up or down 20mm bore steel tubing and connections, incl cleaning for refixing or removal to store complete all as specified and directed. | | 40 | RM |
|---|
| 51 | 51 | Taking up or down 15mm bore steel tubing and connections, incl cleaning for refixing or removal to store complete all as specified and directed. | | 45 | RM |
|---|
| 52 | 52 | S&F 20mm bore steel tubes medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as sepcified and directed. | | 40 | RM |
|---|
| 53 | 53 | S&F 15mm bore steel tubes medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as sepcified and directed. | | 45 | RM |
|---|
| 54 | 54 | M&L for Cutting chases in brick walls for concealed water tubing or concealed conduit wiring etc and making good in CM 1:3, cutting not exc. 10 cm girith complete all as specified and directed. | | 26 | RM |
|---|
| 55 | 55 | S&F 15mm bib tap cast copper alloy long body chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed complete all as specified and directed. | | 20 | Each |
|---|
| 56 | 56 | S&F 15mm pillar taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed complete all as specified and directed. | | 8 | Each |
|---|
| 57 | 57 | S&F 15mm angle valves, cast copper alloy chromium plated fency type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed. | | 18 | Each |
|---|
| 58 | 58 | S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed. | | 23 | Each |
|---|
| 59 | 59 | S& F Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) | | 10 | Each |
|---|
| 60 | 60 | S&F in repair vitereous china squatting pan Orrissa pattern, size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipes) incl provision of lime concrete bedding complete all as specified and directed. | | 5 | Each |
|---|
| 61 | 61 | S&F PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed. | | 10 | Each |
|---|
| 62 | 62 | Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern | | 10 | Each |
|---|
| 63 | 63 | M&L for cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust, dirt etc and providing roof treatment complete all as described in the following process after the surface is completely dried : - | | 160 | Sqm |
|---|
| 64 | 64 | (b) M&L for applying evenly one coat of polymeric modified bituminious primer @ 0.30Kg/Sqm all as specified. | | | |
|---|
| 65 | 65 | (c) M&L for providing APP based 5 layer polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application as per manufactur's instruction and shall be applied by authorised person of the company complete all as specified and directed. | | | |
|---|
| 66 | 66 | (d) M&L applyling a coat of polymeric modified bitumen 85/25 @ 1.20 Kg/Sqm and finishing the top surface by two coat of alluminium paints@ 0.10 Kg/Sqm. | | | |
|---|
| 67 | 67 | (e) M&L for carrying out test by filling of water for conteneous 48 hours and providing plaster template of size 450x450mm,10mm thick in CM 1:4 and engraving CA No/Firm name/date all as specified and directed. | | | |
|---|
