| 1 | 1 | M & L for providing and injecting emulsion for post construction anti termite treatment along the external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling holes and plugging the holes with cement mortar & matching the existing surface etc complete all as specified and as directed. | | 3500 | RM |
|---|
| 2 | 2 | M & L for providing and injecting emulsion for post construction anti termite treatment for soil under existing floors using chemical emulsion at the rate of one litre per hole, 300mm apart including drilling 12 mm dia holes and plugging the holes with cement mortar 1:2 etc to match with existing floors complete all as specified and as directed. | | 2250 | Sqm |
|---|
| 3 | 3 | M & L for providing and injecting emulsion for post construction anti termite treatment at points of contacts of wood with masonry / concrete surfaces using chemical emulsion mixed with oil or kerosine at the rate of 0.5 litres per hole including drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and plugging the holes with cement mortar 1:2 etc to match with existing surface complete all as specified and as directed. | | 1200 | RM |
|---|
| 4 | 4 | Taking down rolling shutters of following sizes, replacing worn out/unserviceable parts with new ones, overhauling, applying grease/oil, refixing in position and making functional complete all as specified and as directed:-\nNote : Replacement of parts shall be measured and paid separately in respective items | | | |
|---|
| 5 | 4.1 | (a) Area not exceeding 8 Sqm each | | 8 | Each |
|---|
| 6 | 4.2 | (b) Area exceeding 8 Sqm but not exceeding 12 Sqm each | | 12 | Each |
|---|
| 7 | 4.3 | (c ) Area exceeding 12 Sqm but not exceeding 20 Sqm each | | 16 | Each |
|---|
| 8 | 4.4 | (d) Area exceeding 20 Sqm but not exceeding 26 Sqm each | | 10 | Each |
|---|
| 9 | 5 | M&L for overhauling of rolling shutter of following sizes (without taking down from position but by opening hood cover), applying grease for trouble free operation, refixing the hood cover in position and making functional complete all as specified and as directed:-\nNote : Replacement of parts shall be measured and paid separately in respective items | | | |
|---|
| 10 | 5.1 | (a) Area not exceeding 8 Sqm each | | 8 | Each |
|---|
| 11 | 5.2 | (b) Area exceeding 8 Sqm but not exceeding 12 Sqm each | | 12 | Each |
|---|
| 12 | 5.3 | (c ) Area exceeding 12 Sqm but not exceeding 20 Sqm each | | 15 | Each |
|---|
| 13 | 5.4 | (d) Area exceeding 20 Sqm but not exceeding 26 Sqm each | | 10 | Each |
|---|
| 14 | 6 | S&F in repairs mild steel worn wheel and gear wheel fitted to suspension shaft of the rolling shutter and connecting rod respectively all as specified and as directed.\nNote:- Suspension shaft and connecting rod shall be measured and paid separately. | | 10 | Each |
|---|
| 15 | 7 | S&F in repairs Bevel gear box with crank handle fitted to connecting rod all as specified and as directed.\nNote:- Connecting rod shall be measured and paid separately. | | 20 | Each |
|---|
| 16 | 8 | S&F in repairs 25mm dia mild steel connecting rod fitted to gear wheel and bevel gear all as specified and as directed. | | 20 | RM |
|---|
| 17 | 9 | S&F in repairs, fabricated lock plate of riveted construction made of mild steel sheet 3.15mm thick and 100mm width, reinforced with mild steel angle of size 40mmx40mmx6mm at bottom and top shall be interlocked with bottom most lath section of curtain all as specified and as directed. | | 10 | RM |
|---|
| 18 | 10 | S&F in repairs lath section made from cold rolled steel strips 1.20 mm thick with inter-locking curls at both edges and a deep corrugation at the centre with a bridge depth of not less than 12 mm and each lath section shall be continous single piece without any welding joint complete all as specified and as directed. | | 80 | Sqm |
|---|
| 19 | 11 | All as per item No 10 here in before, but 0.9mm thick lath all as specified and as directed. | | 20 | Sqm |
|---|
| 20 | 12 | S&F in repairs Mild steel clips riveted at either ends and fitted on ends of lath section all as specified and as directed. | | 200 | Each |
|---|
| 21 | 13 | S&F in repairs Mild steel flat iron 40mmx6mm as in stiffeners in hood cover and stopper to arrest lock plate including necessary welding etc all as specified and as directed. | | 20 | Kg |
|---|
| 22 | 14 | S&F in repairs Mild steel guide channel of size 65mm depth, 25mm width and 3.15mm thick including fixing of cleats or supports (not exceeding 750mm c/c) for attachment to the wall or column by means of bolts or screws all as specified and as directed. | | 16 | RM |
|---|
| 23 | 15 | All as per items No. 14 herein before, but guide channel of size 75mm depth , 25mm width and 3.15mm thick all as specified and as directed. | | 8 | RM |
|---|
| 24 | 16 | S&F in repairs Mild steel bracket plate of 3.15mm thick and area n.exc 0.15 sqm in any shape fixed to the wall with hold fast of mild steel angle 40mmx40mmx6mm of length minimum 200mm from edge of the bracket plate embedded with PCC 1:2:4 type B1 bed block of size 250 mm x 200 mm x 200 mm and fitted with guide channel by means of 20mm square bar of suitable length all as specified and as directed. | | 4 | Each |
|---|
| 25 | 17 | All as per items No 16 herein before, but bracket plate of 6mm thick and area exceeding 0.15 sqm & not exceeding 0.25 sqm all as specified and as directed. | | 2 | Each |
|---|
| 26 | 18 | S&F in repairs Suspension shaft made out of mild steel pipe confirming to IS-1161-1968, medium class 40mm dia all as specified and as directed. | | 12 | RM |
|---|
| 27 | 19 | All as per item No 18 here in before, but for 50mm dia all as specified and as directed. | | 6 | RM |
|---|
| 28 | 20 | S&F in repairs Mild steel cranked handle suitable for gear operated type rolling shutter all as specified and as directed. | | 6 | Each |
|---|
| 29 | 21 | S&F in repairs “0 0” gauge helical wire or flat spiral spring fixed with suspension shaft all as specified and as directed. | | 10 | Each |
|---|
| 30 | 22 | S&F in repairs “0” gauge helical wire or flat spiral spring fixed with suspension shaft all as specified and as directed. | | 6 | Each |
|---|
| 31 | 23 | All as per item No 22 here in before, but “2” gauge all as specified and as directed. | | 6 | Each |
|---|
| 32 | 24 | All as per item No 22 here in before, but “3” gauge all as specified and as directed. | | 6 | Each |
|---|
| 33 | 25 | S&F in repairs suspension shaft cage formed out of 35mmx6mm flat iron all as specified and as directed. | | 15 | Kg |
|---|
| 34 | 26 | S&F in repair cast iron ball bearing for rolling shutter complete all as specified and as directed. | | 40 | Each |
|---|
| 35 | 27 | S&F in repairs mild steel sheet 1.00 mm thick as in hood cover of any shape with flat iron stiffeners at both edges and fixed to the bracket plate all as specified and as directed.\nNote : Stiffeners shall be measured and paid separately. | | 10 | Sqm |
|---|
| 36 | 28 | S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters all as specified and as directed. | | 6 | Each |
|---|
| 37 | 29 | Taking down steel gate each leaf area exc 2.0 Sqm but n exc 6 Sqm with bed blocks, pintle hinges & hold fasts, rectifying the defects such as straightening, welding etc and refixing in position with provision of bed blocks, new/old pintle hinges and hold fasts as required and all as directed.\nNOTE : Welding, bed blocks, pintel hinges and hold fasts shall be measured and paid separately. | | 14 | Each |
|---|
| 38 | 30 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bed blocks including necessary formwork for embedding holdfasts all as specified and as directed. | | 1 | Cum |
|---|
| 39 | 31 | S&F in repairs mild steel 0.80mm thick plain black sheet in steel gates, cut to size, punched, including round headed screws, clout nails or rivets and fixed to steel frame with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed | | 30 | Sqm |
|---|
| 40 | 32 | M & L for welding in repairs n.exc 2.5 cm in length and thickness of metal to be welded exc 6mm but not exceeding 9mm all as specified and as directed. | | 60 | Each |
|---|
| 41 | 33 | M & L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. | | 200 | Sqm |
|---|
| 42 | 34 | M & L for preparation of old treated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. | | 1000 | Sqm |
|---|
| 43 | 35 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed. | | 3 | Qtl |
|---|
| 44 | 36 | M&L for mild steel structural framed work confirming to Fe410-W (Gde-E-250) quality-A as in door or gates of angle or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed. | | 300 | Kg |
|---|
| 45 | 37 | Taking down motorised aluminum rolling shutter of opening area exceeding 20 sqm and not exceeding 30 Sqm including hood cover/housing, octagonal tube, end cap, side guide rail, motor and its connected accessories etc and overhauling, servicing, greasing complete including replacement with new aluminum laths etc and reassembling after rectification of defects, fixing back to its original position and making smooth functioning to the satisfaction to Engineer-in-charge complete all as specified and as directed.\nNote:- Aluminum laths shall be measured and paid separately. | | 4 | Each |
|---|
| 46 | 38 | S&F in repairs lath section made from rolled aluminium strips 1.00 mm thick double walled inter-locking curls at both edges, 65 mm wide and a deep corrugation at the centre with a bridge depth of not less than 12 mm and each lath section shall be continous single piece without any welding joint complete all as specified and as directed. | | 4 | Sqm |
|---|
| 47 | 39 | Dismantling electric motor 0.50 HP, single phase 230 volt of any make, from the top of rolling shutter, opening the motor, cutting the existing burnt winding wire and rewinding the motor using super enamelled copper wire of suitable gauge to match with the existing winding including varnishing & drying and re-assembling the motor and refixing in original position, connecting with rolling shutter with proper alignment and testing complete all as specified and as directed. | | 4 | Each |
|---|
| 48 | 40 | Taking down of cement plaster from brick or stone wall surfaces of any description including raking out joints, hacking for key, scrubbing down with water etc. all as specified and as directed. | | 200 | Sqm |
|---|
| 49 | 41 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with water proofing compound finished even and smooth without using extra cement all as specified and as directed. \nNote:- Supply only Water proofing compound shall be measured and paid separately. | | 200 | Sqm |
|---|
| 50 | 42 | Supply only water proofing compound all as specified and as directed. | | 40 | Kg |
|---|
| 51 | 43 | Taking down steel door (hanger/Tech stores door) each leaf area exc 2.0 Sqm but n exc 6 Sqm with bed blocks, pintle hinges & hold fasts, rectifying the defects such as straightening, welding etc and refixing in position with provision of bed blocks, new/old pintle hinges, handles, lock system and hold fasts as required all as specified and as directed.\nNOTE : Welding, bed blocks, pintel hinges and hold fasts shall be measured and paid for separately. | | 12 | Each shutter |
|---|
| 52 | 44 | All as per item No 43 here in before, but each leaf exc 6 sqm complete all as specified and as directed. | | 16 | Each shutter |
|---|
| 53 | 45 | Taking down Collapsible steel gates each exc 4 Sqm with pintle hinges, top and bottom runners, channel pickets & hold fasts, rectifying the defects such as straightening, welding, reveting , securing runners with hold fasts and brackets etc and refixing in position with provision of bed blocks, new/old pintle hinges, handles, lock system and hold fasts as required all as specified and as directed.\nNOTE : Welding, bed blocks, pintel hinges and hold fasts shall be measured and paid separately.\n | | 6 | Each |
|---|
| 54 | 46 | M & L for applying two coats of exterior emulsion weather proof paint over a coat of primer including preparation of newly plastered surfaces all as specified and as directed. | | 200 | Sqm |
|---|
