Improving Earthquake Resiliency Of Masonry Lifeline Erml Buildings In Tripura Under Pilot Project Sh Seismic Retrofitting And Rehabilitation Work Of I Mandai Bazaar H . S School , Mandai , West Tripura , Ii Ranir Bazaar Phc , Ranir Bazaar , West Trip, Agartala-Tripura

TDR : 26012698

Tender Notice
BOQ

Expired

Agartala , Tripura

Tender Brief : Improving Earthquake Resiliency Of Masonry Lifeline Erml Buildings In Tripura Under Pilot Project Sh Seismic Retrofitting And Rehabilitation Work Of I Mandai Bazaar H . S School , Mandai , West Tripura , Ii Ranir Bazaar Phc , Ranir Bazaar , West Trip

Document Fees
₹ 5000 /-

EMD
₹ 201412.0 /-

Tender Value
Refer document

Submission Date
17-12-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work : Improving Earthquake Resiliency of Masonry Lifeline (ERML) buildings in Tripura under Pilot Project / SH: Seismic Retrofitting and rehabilitation work of (i) Mandai bazaar H.S School, Mandai, West Tripura,(ii) Ranir bazaar PHC, Ranir bazaar, West Tripura (iii) PWD (R&B) office building of Division-I, Netaji Chowmuhani, West Tripura and (iv) Melaghar Girls H.S (+2) School, Melaghar, Sepahijala Tripura.
1	1	EARTHWORK:	BI01010001010000000000000515BI0100001112
2	1.1	Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.	BI01010001010000000000000515BI0100001113	108.62	Cum
3	2	CEMENT CONCRETE WORK:	BI01010001010000000000000515BI0100001114
4	2.1	Providing & laying in position Cement concrete of specified grade excluding the cost of Centering & Shuttering, all work upto plinth level 1:4:8 (1 Cement: 4 Coarse Sand: 8 graded stone aggregate. 40 mm nominal size)	BI01010001010000000000000515BI0100001115	98.54	Cum
5	3	REINFORCED CEMENT CONCRETE WORK:	BI01010001010000000000000515BI0100001116
6	3.1	Centering / shuttering with ply or steel shutters for RCC/PCC /dome/slab/foundation/deck/lintel etc. wherever required including materials, tools, tackles, skilled labours etc. complete.	BI01010001010000000000000515BI0100001117	1718.61	Sqm
7	3.2	Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.	BI01010001010000000000000515BI0100001118
8	3.21	(i) Thermo-Mechanically Treated bars of grade Fe-500D or more	BI01010001010000000000000515BI0100001119	10117.7	Kg
9	3.3	Providing and fixing RCC Jolly 20mm thick of any Shape/Design Pattern with rich concrete, grade M25 & above including casting and fixing etc. complete.	BI01010001010000000000000515BI0100001120	10	Sqm
10	4	BRICK WORK:	BI01010001010000000000000515BI0100001121
11	4.1	First class brick work in foundation and plinth including cost of all materials as required complete:-	BI01010001010000000000000515BI0100001122
12	4.11	(i) In cement mortar 1:5 ( 1 cement : 5 fine sand ).	BI01010001010000000000000515BI0100001123	2.43	Cum
13	4.2	First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-	BI01010001010000000000000515BI0100001124
14	4.21	(i) In cement mortar 1:5 ( 1 cement : 5 fine sand )	BI01010001010000000000000515BI0100001125	4.22	Cum
15	5	WOOD & PVC WORK:	BI01010001010000000000000515BI0100001126
16	5.1	Providing and fixing factory made door frame (Single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60 mm width and 30 mm thickness and shall be fixed to wall as per instructions of Engineer incharge using 100 X 8 Sheet metal CSK Screws	BI01010001010000000000000515BI0100001127	32.75	Running meter length
17	5.2	Providing and fixing 28 mm thick door shutter made of solid PVC frame profile with Homogenous fine cellular structure having smooth outer integral scheme having 71 mm width and 28 mm thick as vertical & horizontal style joints are made using solvent adhesive & GI 'C' Sections 39 mm X 19 mm X 0.6 mm Thick or MS Pipe 40 mm X 20 mm stiffner frame insert & telescopic polymeric 'L' corners. The panel shall be filled with 3 mm thick high providing compact laminate as per manufacturer's specifications & directions of the Engineer Incharge cover mouldings shall be provided for covering fixing screws & elegant look (for WC, bathroom door shutter)	BI01010001010000000000000515BI0100001128	13	Sqm
18	5.3	Providing and fixing tower bolt ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1858) transparent or dyed to required colour or shade with necessary screws etc., complete	BI01010001010000000000000515BI0100001129
19	5.31	a) 150 X 10 mm	BI01010001010000000000000515BI0100001130	11	Nos
20	5.4	Providing and fixing Aluminium handle ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc., complete	BI01010001010000000000000515BI0100001131
21	5.41	a) 125 mm	BI01010001010000000000000515BI0100001132	12	Nos
22	6	FLOORING WORK:	BI01010001010000000000000515BI0100001133
23	6.1	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622 - 2017, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement: 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.	BI01010001010000000000000515BI0100001134	68.966	Sqm
24	6.2	Providing and fixing rectified glazed wall tiles 300 x 450 mm or more conforming to IS : 15622 - 2017 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.	BI01010001010000000000000515BI0100001135	60.12	Sqm
25	6.3	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.	BI01010001010000000000000515BI0100001136	777	Sqm
26	7	FINISHING WORK:	BI01010001010000000000000515BI0100001137
27	7.1	Painting with Synthetic enamel Paint (two or more coats) of required colour of approved brand and manufactures on new /oldwork to give an even shade over an under coat of suitable shade with ordinary paint of approved brand and manufacture.	BI01010001010000000000000515BI0100001138	1294	Sqm
28	7.2	Providing and applying one cement primer of approved brand and manufacture on wall surface complete.\nGround Floor Walls, ceiling etc where ever found required including damping wall tools tackles brush etc complete\n	BI01010001010000000000000515BI0100001139	3472.14	Sqm
29	7.3	Wall Painting with plastic Emulsion paint (one or More Coat) of required colour of approved brand and manufacture on new work to give an even shade including tooles tackles etc complete\	BI01010001010000000000000515BI0100001140	3981.17	Sqm
30	7.4	15 mm Cement Plastering including cement punning double layer including cost of materials required and finishing even and smooth, curing complete in cement mortar 1:4 (1 Cement: 4 Sand) including Poly propylene fibre at the rate of 800 gms per cum. of cement & admixture at the rate of 150 ml per bag of cement	BI01010001010000000000000515BI0100001141	1235.56	Sqm
31	7.5	Providing and applying washable acrylic coating upto max 300 micron DFT which shall be high resistance to C02/S02/chloride ions diffusion, resistance to UV rays, elastoplastic, including skilled labours as per the manufactures specification including tools , tackles etc complete	BI01010001010000000000000515BI0100001142	432	Sqm
32	8	REPAIR & REHABILITATION WORK:	BI01010001010000000000000515BI0100001143
33	8.1	Providing and laying POP on the existing flooring upto required thick 40mm to protect the Floor during retrofitting work and removal of the same after completion of work all including cost of materials, labour, equipments, transporting , lead, lift tools etc all including disposal of debris etc complete	BI01010001010000000000000515BI0100001144	361.05	Sqm
34	8.2	Removal of existing plaster on external, internal walls, towers upto any thick wherever found required including deep raking the joints , providing suitable treatment to remove the formation of alkali salts rinsing with hot water or by chemical wash (if required) without eroding the brick surface etc. complete including materials, chemicals, cost of labour, tools and tackles complete including wetting/damping or drying the wall etc. complete and disposal of debris etc complete	BI01010001010000000000000515BI0100001145	2624.38	Sqm
35	8.3	Chiseling the deteriorated concrete upto 25mm to 40mm thick with power driven (Hilti-TE504 or equivalent) or pneumatic chisel of standard including cleaning loose friable materials, also removal of rust in the rebars with rust remover, buffing wheel etc, including applying Zinc rich primer on th rebars etc including equipments , tooles and tackles etc complete to be kept ready to receive PMM mortar/Micro Concrete etc.	BI01010001010000000000000515BI0100001146	305.01	Sqm
36	8.4	Providing and applying Hand patch polymer modified mortar upto 25 mm thick at the ratio 1:3 1 cement: 3 Sand) including mechanical mixing, SBR at the rate of 15% by weight of cement, along with required synthetic fiber 12mm, adding plasticizers as per the manufactures specification etc. complete including bond coat with SBR/cement slurry etc complete	BI01010001010000000000000515BI0100001147	297.34	Sqm
37	8.5	Providing and placing in position Micro Concrete, which shall be cement based pre-packed single component chloride free, non-shrink , free flow, self compacting ready to use after mixing water in specified proportion obtained from approved manufacturer as per specification upto Grade not less than M40 for column, beam, slab etc. wherever required including mixing with paddle fitted low RPM machine, including materials , labours etc. complete.	BI01010001010000000000000515BI0100001148
38	8.51	(i) 25 mm thick	BI01010001010000000000000515BI0100001149	1783.91	Sqm
39	8.6	Providing and injecting cement slurry Grouting by fixing 10 to 20 mm dia. suitable nozzle of suitable length, over the surface of PCC/RCC/ Brickmasonry and along the construction joint line, cracks, wherever required. Fixing of nozzle shall be in the required portion and the Nozzles shall be fixed with suitable size holes preferably by using repercussive hammer drill (electrically operated) including neat cement slurry admixed with water. Soluble non - shrink based chemical shall be injected through the network of nozzles with low pressure grout pumps (PDP) at a pressure of about 2.0 Kg /cm2, preparing cement slurry by mixing cement with non-shrink @ 500 gms/50 kg bag of cement and water, ensuring that Water : Cement ratio does not exceed 2 (by weight). Wetter the structure, lesser should be the water cement ratio.	BI01010001010000000000000515BI0100001150
40	8.61	The viscosity of the resultant solution water/cement/non-shrink should not be more than 1.2 centipoises. Plasticizing agent shall be added wherever required. The grouting shall be started at very low pressure and increased gradually to a required pressure. The grouting shall be continued till the hole refuses to take any further grout, even at an increased pressure. Applied pressure shall not be more than the strength of the PCC/RCC/brick masonry. After completion of grouting operation, the nozzles shall be sealed properly to the satisfaction of the Engineer-in-Charge. Quoted rate shall be inclusive of all.	BI01010001010000000000000515BI0100001151	3800	One Kg\n of Cement
41	8.7	Providing and applying two coats of Zinc chromate paint (Epoxy base) after due Surface preparation by removing corrosion rust, mill scales, pit patches etc. including buffing with suitable buffing machine, rust removers if required etc. complete.	BI01010001010000000000000515BI0100001152	305.01	Sqm
42	8.8	Providing and laying cement concrete 1:1.5:3 (1 cement : 1.5 fine sand : 3 graded stone aggregate 6mm done chips of 10mm to 20 mm depending on the site condition) with addition of Polypropylene fibre as per manufactures specification or at the rate of 200 gms per one bag of cement and admixture at the rate of 200 ml per bag of cement etc. mixing, pouring, leveling, curing etc including lift etc. complete for PCC flagging or wherever required.	BI01010001010000000000000515BI0100001153	2.85	Cum
43	8.9	Providing and fixing shear connectors, fixing with epoxy as per manufactures specification, drilling 10mm dia hole upto a depth of 100mm, cleaning the holes with blowers etc. and fixing connectors with 8mm steel upto a length of 150mm to 300mm depending upon the requirement including cutting and bending with labour, equipment, machinary etc. complete wherever required.	BI01010001010000000000000515BI0100001154	5981	Nos
44	9.1	Anchoring wall / slab after exposing ceiling slab/floor slab and connecting the same with suitable MS Plate, Micro/M25 grade concrete etc complete. All including steel, concrete , frabracation , fixing , casting	BI01010001010000000000000515BI0100001155	24	Nos
45	9.2	Providing and fixing anchors of required length not less than 700mm made of four G.I. bars of minimum diameter 3mm for fixing seismic straps to the existing walls including drilling holes, inserting anchor through the holes in walls, binding with straps provided on one or both faces of the walls, grouting the holes with micro-concrete etc. complete as per direction of Engineer-in-Charge or equivalent method of anchoring with steel welding system etc	BI01010001010000000000000515BI0100001156	7437	Nos
46	9.3	Removal of wooden door including frames from existing brick wall including removing threaded hold fast etc and stacking the same safely to reuse, including placing tie rafter on frames etc complete	BI01010001010000000000000515BI0100001157	41	Nos
47	9.4	Removal of wooden window of any size including frames from existing brick wall including removing threaded hold fast etc and stacking the same safely to reuse, including placing tie rafter on frames etc complete	BI01010001010000000000000515BI0100001158	146	Nos
48	9.5	Repairing door chowkhats & shutters with other door materials i.e. serviceaseable materials etc including nails adisive, cutting machine, planner, required hinges etc skilled carpenters etc complete along with applying anti-termite chemical, etc complete	BI01010001010000000000000515BI0100001159	28	Nos
49	9.6	Repairing window chowkhats & shutters with other door materials i.e. serviceaseable materials etc including nails adisive, cutting machine, planner, required hinges etc skilled carpenters etc complete along with applying anti-termite chemical, etc complete	BI01010001010000000000000515BI0100001160	119	Nos
50	9.7	Demolishing brick wall , pier , etc where ever found required with low impact chipping machine and disposal the debris at a lead of 100 m etc including skilled operator complete	BI01010001010000000000000515BI0100001161	49.12	Cum
51	9.8	Repairing existing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.L limpet washers filled with white lead and excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, including laying old serviceable APP sheet etc complete	BI01010001010000000000000515BI0100001162	574.9	Sqm
52	9.9	Repairing and re-fixing old false ceiling with avilable materials etc complete at any height, if any new materials required, the same shall be paid sepereately	BI01010001010000000000000515BI0100001163	294.82	Sqm
53	10.1	Providing , frabracting and fixing MS Grill at the rate of 16Kg per Sqm with suitable MS flats/bors etc including welding, grinding etc complete	BI01010001010000000000000515BI0100001164	1458.4	Kg
54	10.2	Removal of Collapsible gate of any shape existing brick wall including removing threaded hold fast etc and stacking the serviceable materials etc complete	BI01010001010000000000000515BI0100001165	4	Nos
55	10.3	Removal of existing water proofing system upto any thick max upto 20 to 400mm and disposing the debris upto a max. lead of 1km from site to stocking ground incl. cost of labour, tools, tackles, equipments etc. complete all including removal of debris	BI01010001010000000000000515BI0100001166	286.89	Sqm
56	10.4	Surface preparation by overlay ( 50mm) with rich grade concrete M25 and (pre-packed polymer modified mortar if required), with seperated with plain glass of suitable size on either side excluding the cost of centering shuttering , and reinforcement, including Polypropylene Fibre at the rate of 800 Gm per cum of concrete and admixture at the rate of 150ml per bag of cement, etc complete and the glass shall be fixed with micro concrete or equ.including bond coat of SBR/cement slurry etc compelete after removing loose friable material and weak concrete, surface defects such as blowholes and voids must be fully exposed. Repairs to the substrate, filling of joints, blowholes/voids and surface leveling must be carried out using appropriate products, surface biocide used in the treatment of microbial contamination (fungi, algae, mosses, lichen, mildew and moulds) to be applied prior to the application of a coating system. It is also essential that visible growth, flaking paint and others loose materials are removed prior to application. This may be achieved by wire brush, scraper or other similar means. Oil/grease contamination should be removed using a proprietary solution etc. complete\n	BI01010001010000000000000515BI0100001167
57	10.5	High spots/undulation must be removed by grinding, outgrassing is a naturally occurring phenomenon of concrete that can produce pinholes in subsequently applied coatings, so the surface preparation must be touch sound and neat & clean to receive the coating. Measurement shall be in lenghth and breath of the over lay, steel, shear connector & centering shall be paid seperately	BI01010001010000000000000515BI0100001168	335.86	Sqm
58	11	SANITARY WORK:	BI01010001010000000000000515BI0100001169
59	11.1	Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10litre low level white P.V.C flushing cistern with manually controlled devices (handle over 0 conforming to IS ; 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required;\n\nA) White vitreous china orrisa pattern W.C pan of Size 580x440mm with integral type foot rests.\n	BI01010001010000000000000515BI0100001170	4	Nos
60	11.2	Providing and Fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require; A] White vitreous china wash basin size 630x450mm with a single 15mm C.P brass pillar taps	BI01010001010000000000000515BI0100001171	2	Nos
61	11.3	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangements of approved 450 mm long towel rail with total length of 495 mm, 98 mm width and effective height, quality and colour	BI01010001010000000000000515BI0100001172
62	11.31	a) 600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weight not less than 190 grams	BI01010001010000000000000515BI0100001173	5	Nos
63	11.4	Providing and fixing to the inlet mouth of rain water, soil, waste & vent pipes pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete.	BI01010001010000000000000515BI0100001174
64	11.41	(i) 100 mm	BI01010001010000000000000515BI0100001175	12	Nos
65	11.5	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water, soil, waste & vent pipes pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:	BI01010001010000000000000515BI0100001176
66	11.51	i) Coupler \n - 75 mm OD	BI01010001010000000000000515BI0100001177	40	mt
67	11.52	ii) Coupler\n - 110 mm OD	BI01010001010000000000000515BI0100001178	50	mt
68	11.53	iii) Single equal Tee without door \n - 110 X 110 X 110 mm	BI01010001010000000000000515BI0100001179	5	Nos
69	11.54	iv) Single equal Tee without door \n - 75 X 75 X 75 mm	BI01010001010000000000000515BI0100001180	5	Nos
70	11.55	v) Bend\n - 75 mm	BI01010001010000000000000515BI0100001181	8	Nos
71	11.56	vi) Bend \n - 110 mm	BI01010001010000000000000515BI0100001182	8	Nos
72	12	WATER SUPPLY WORK:	BI01010001010000000000000515BI0100001183
73	12.1	Providing and fixing G.I Pipes Complete with G.I Fittings and Clamps, including cutting and making good the walls etc..	BI01010001010000000000000515BI0100001184
74	12.11	a) 15mm dia; -	BI01010001010000000000000515BI0100001185	15	mt
75	12.12	b) 20mm dia; -	BI01010001010000000000000515BI0100001186	35	mt
76	12.13	c) 25mm dia; -	BI01010001010000000000000515BI0100001187	40	mt
77	12.2	Providing and fixing CP brass bib cock of approved quality confirming to IS 8931 15 mm nominal bore	BI01010001010000000000000515BI0100001188	15	Nos
78	12.3	Providing and fixing CP Brass stop cock confirming to standard design of approved make confirming to IS 8931 15 mm nominal bore	BI01010001010000000000000515BI0100001189	5	Nos
79	12.4	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer - in - charge.(New work)	BI01010001010000000000000515BI0100001190
80	12.41	a) 25 mm Nominal Bore	BI01010001010000000000000515BI0100001191	4	Nos
81	12.5	Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete :	BI01010001010000000000000515BI0100001192
82	12.51	a) 25 mm Nominal Bore	BI01010001010000000000000515BI0100001193	4	Nos
83	13	MISCELLANEOUS WORK:	BI01010001010000000000000515BI0100001194
84	13.1	loading and Unloading of stone boulder, stone aggregate, brick aggregate, Kankar, earth crushed slag, stone for masonry work by mechanical means including a lead up to 10Km	BI01010001010000000000000515BI0100001195	246.79	Cum
85	14	ELECTRICAL WORK:	BI01010001010000000000000515BI0100001196
86	14.1	Providing and fixing electrical steel box of size 3 model, 4 model & 6 model metal box at required portion including cutting bricks, fixing box, rendering etc. complete.	BI01010001010000000000000515BI0100001197	21	Nos
87	14.2	Providing and fixing electrical steel box of size 8 model metal box at required portion including cutting bricks, fixing box, rendering etc. complete.	BI01010001010000000000000515BI0100001198	21	Nos
88	14.3	Providing and fixing electrical steel box of size 16 model metal box at required portion including cutting bricks, fixing box, rendering etc. complete.	BI01010001010000000000000515BI0100001199	26	Nos
89	14.4	Providing and fixing electrical steel box of size 10 model metal box at required portion including cutting bricks, fixing box, rendering etc. complete.	BI01010001010000000000000515BI0100001200	26	Nos
90	14.5	Providing required electrical wire into the already fixed conduits with required Distrubution boxes, MCB etc also removal of existing electrical connection and using serviceaseable materials etc complete Measurement shall be in plinth area of the building i.e. Number of Floors X LengthXBreadth (Outer to Outer)	BI01010001010000000000000515BI0100001201	1191.73	Sqm

Also Visit

Tenders

Tripura Tenders

Construction Tenders

Civil Construction Tenders

Masonary Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Improving Earthquake Resiliency Of Masonry Lifeline Erml Buildings In Tripura Under Pilot Project Sh Seismic Retrofitting And Rehabilitation Work Of I Mandai Bazaar H . S School , Mandai , West Tripura , Ii Ranir Bazaar Phc , Ranir Bazaar , West Trip, Agartala-Tripura

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Improving Earthquake Resiliency Of Masonry Lifeline Erml Buildings In Tripura Under Pilot Project Sh Seismic Retrofitting And Rehabilitation Work Of I Mandai Bazaar H . S School , Mandai , West Tripura , Ii Ranir Bazaar Phc , Ranir Bazaar , West Trip, Agartala-Tripura

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us