Repair / Maintenance Of Street/ Security Light At Hq 61 Inf Bde , 286 Fd Regt , 163 Med Regt , 623 Eme , 112 Engr Regt And Other Location At Dipatoli Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Nov 2020
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dipatoli → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / maintenance Of Street/ Security Light At Hq 61 Inf Bde , 286 Fd Regt , 163 Med Regt , 623 Eme , 112 Engr Regt And Other Location At Dipatoli Mil Stn
BOQ
| Name of Work:- REPAIR / MAINT OF STREET/ SECURITY LIGHT AT HQ 61 INF BDE, 286 FD REGT, 163 MED REGT, 623 EME, 112 ENGR REGT AND OTHER LOCATION AT DIPATOLI MIL STN | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling and taking down old unserviceable street light fitting/ bldg security light fittings/ High Mast Light fitting of any capacity, any height of pole /wall including disconnecting the cable connections complete all as specified and as directed. | 61 | Each\nJob | |
| 2 | 2 | Disconnecting electrically and taking out unserviceable feeder pillar box any type and size and removing material from site including making good of disturbed surfaces complete all as specified and as directed. | 5 | Each\nJob | |
| 3 | 3 | Taking down carefully copper/aluminium wiring of size 1.5/2.5 sqmm from surface at any height of pole and removing the materials from site and making good the disturbed surfaces etc complete all as specified and as directed. | 80 | Rm | |
| 4 | 4 | Excavating cable and high mast cable from any height of pole and removing the materials from site and making good the disturbed surfaces etc complete all as specified and as directed. | 300 | Rm | |
| 5 | 5 | S & F pressure die cast aluminum alloy housing LED street light fitting 60 Watt capacity, IP 66 and connected from junction box/overhead lines with 1.5 Sq mm 2 run and one run earth wire complete all as specified and as directed. Make : Jaguar Cat Part No.LSRT01S060XC or equivalent as per list of make. | 45 | Each | |
| 6 | 6 | S & F pressure die cast aluminum alloy housing LED street light fitting 90 Watt capacity, IP 66 and connected from junction box/overhead lines with 1.5 Sq mm 2 run and one run earth wire complete all as specified and as directed. Make:- JAQUAR CAT No.LSRT01S090XC or equivalent as per list of make. | 8 | Each | |
| 7 | 7 | S&F LED flood light fittings 90 Watts, with and including Driver unit assembly complete all as specified and as directed. Make:- Jaguar Cat part No LFLD02S090XC or equivalent as per list of makes. | 4 | Each | |
| 8 | 8 | S&F LED flood light fittings 120 Watts, with and including Driver unit assembly complete all as specified and as directed. Make:- Jaguar Cat part No LFLD02S090XC or equivalent as per list of make. | 4 | Each | |
| 9 | 9 | M&L for Nature Switch street light controller single phase 5 KW of automatic street light switch using infrared sensor based NATURAL SWITCH for automatic switching of street lights, required illuminance for switching on is =30 Lux and for switching off =10 Lux also having part night operation 4 to12 hour with contactors and outgoing and incoming MCBs connected with minimum 10sqmm FLRS multistranded circuit all these must be enclosed in a pole/wall mounted enclosure made of rust proof, electric shock proof and termite proof (Hensel made SMC junction box) conforming to IP54 complete all as specified and as directed. | 5 | Each | |
| 10 | 10 | S&F power contactor type 1P auxilary contact 1NO 1 NC coil voltage 230V AC, 32 A, 50 Hz suitable for timer switch of street light complete all as specified and as directed. Make:- L&T/Schneider/Siemens | 5 | Each | |
| 11 | 11 | M&L XLPE 4 core 16 sqmm insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, in trenches/fixed on wall complete all as specified and as directed. \nNotes:- (i) Quoted rate shall include the cost of lugs of proper size and cable glands. \n(ii) Excavation, earthwork, PCC cover and sand cushioning shall be measured and paid seprately. | 180 | Rm | |
| 12 | 12 | Excavation in trenches not exceeding 1.5 mtr deep and 1.5 mtr width as in soft/loose soil complete all as specified and as directed. | 52 | Cum | |
| 13 | 13 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. | 24 | Cum | |
| 14 | 14 | Removal of excavated soil to a distance n.exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed. | 28 | Cum | |
| 15 | 15 | M&L for sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep over the cable complete all as specified and as directed. \nNote:- Punned thickness shall be taken for measurement. | 22 | Cum | |
| 16 | 16 | M & L for laying bricks, common burnt clay building sub-class 'B' old size bricks for protection of cable in trenches complete all as specified and as directed. | 1856 | Each | |
| 17 | 17 | M&L for unsheated 4 core 16 sqmm insulated, unarmoured, heavy duty electric cable with copper conductor, 1100 Volts grade suitable for High Mast light complete all as specified and as directed. | 120 | RM | |
| 18 | 18 | Repairing of High mast 3 phase Induction motor rewinding of motor, oiling and greasing of motor and chain system complete all as specified and as directed. | 2 | Each | |
| 19 | 19 | M&L for boring of holes under road/pavement/hard standing or any other situation by manual mean for passing GI pipe 50mm bore grade and making good both the ends complete all as specified and as directed. Note:- Cost of GI pipe shall be measured and paid seperately. | 24 | Rm | |
| 20 | 20 | M&L for cutting of existing road/hard standing for laying cables/pipe including making good the disturbed surface to match with the adjoining surfaces with PCC (1:3:6) type C2 (using 40mm graded stone aggregates) complete all as specified and as directed. | 18 | Rm | |
| 21 | 21 | Demolition of cement concrete in ground floor and paving built in cement concrete (unreinforced) n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed. | 2.5 | Cum | |
| 22 | 22 | M&L for PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in coping of poles including necessary use and waste of form work and fair finshing to exposed surface without using extra cement complete all as specified and as directed. | 1 | Cum | |
| 23 | 23 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation for stay assembly, repairing of floor/paths, fencing post, road cuts etc including necessary use and waste of form work and fair finshing to exposed surface without using extra cement complete all as specified and as directed. | 1.5 | Cum | |
| 24 | 24 | Supply fixing and fabricating tray holding cross arms, FI clamps, support U clamps, strips and back plates fabrication from structural steel section including nut, bolts, washer, bars etc of required size and thickness for supporting of cable tray by welding including bending or welding cold or hot,drilling holes for bolt in any shape or size indicated with and including one coat primer over one finishing coat of black paint complete all as specified and as directed. | 50 | Kg | |
| 25 | 25 | S&F GI strip of size (25x4) mm connected both ends with necessary bolts, nuts & washers complete all as specified and as directed. | 20 | Rm | |
| 26 | 26 | Supply and fixing in replacement of street light cable junction box of size (155x155x100) mm with terminals fixing on pole with (25x4) mm aluminium strip clamp with nut, bolts and washer etc complete all as specified and as directed. Make : Hensel or equivalent. | 20 | Each | |
| 27 | 27 | S&F in replacement service bracket for street light fitting made out of 40 mm bore light grade GI pipe of length 1.5 mtr long (approx) bend to shape 115 degree, with 2 Nos (32x 6)mm GI clamp, nut, bolts, washer etc and fix to pole for fixing of street light fitting on pole/wall etc complete all as specified and directed. | 18 | Each | |
| 28 | 28 | S&F in replacement GI pipe light grade 50 mm bore with GI fittings for cable protection on road crossings /plinth protection or fixed to the pole/ wall etc for cable protection complete all as specified and as directed. | 58 | Rm | |
| 29 | 29 | S&F in replacement GI pipe light grade 40 mm bore with GI fittings for cable protection on road crossings /plinth protection or fixed to the pole/ wall etc for cable protection complete all as specified and as directed. | 18 | Rm | |
| 30 | 30 | M&L for 1.5 Sqmm, single core two runs PVC insulated and unsheathed FR cable 1100 Volts grade with multistranded copper conductor and one run of 1.5 Sqmm cable for common earth dolly drawn through heavy duty PVC conduit 20mm dia for street light pole including connection from kiosk box to street light fittings complete all as specified and as directed. Note:- Three core 1.5 sqmm cable and one run of PVC conduit shall be measured and paid as one run. | 40 | Rm | |
| 31 | 31 | M&L for 2.5 Sqmm, single core two runs PVC insulated and unsheathed FR cable 1100 Volts grade with multistranded copper conductor and one run of 2.5 Sqmm cable for common earth dolly drawn through heavy duty PVC conduit 20mm dia for street light pole including connection from kiosk box to street light fittings complete all as specified and as directed. Note:- Three core 2.5 sqmm cable and one run of PVC conduit shall be measured and paid as one run. | 40 | Rm | |
| 32 | 32 | M&L scrapping out old painted surface, prepration of old street light poles by scraping, cleaning of old surfaces of the existing street light tubular poles of size up to 9 mtr long above ground level including GI brackets and painting with two coats of aluminium paint including marking 30 cm strips on pole in black and yellow colour, including write number on pole complete all as specified and as directed. | 40 | Each Job | |
| 33 | 33 | Supply and fixing in replacement post top lantern cast aluminium spigot, spun aluminium canopy with clear acrylic cover with 20 Watt LED lamp including all accessories such as bracket, GI Pipe and prewired complete all as specified and as directed. | 6 | Each | |
| 34 | 34 | M &L for GI Earthing complete with GI earth plate electrode of size (60cm x 60cm) x 6 mm thick, buried directly in ground vertically to size of depth not less than (0.90x 0.60)m x 2.25 mtr below ground level with top edge of the plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised earth strip of size (25x3) mm, 7.5 mtr long by means of brazing nuts, bolts, check nuts & washers, testing of completion (drawn in earth lead protection pipe light gade GI of size 32/40 mm dia) by means brazing at both edges with vertical plate of electrode all as shown in plate No 3 of SSR Part - I connected to earthing lead with Main switch/main control board, filling with charcoal dust 200 Kg, and common salt 100 KG, including necessary excavation and earth work in any type of soil, perforated watering pipe, funnel with wire mesh, earth lead protection pipe light grade, PCC chamber (1:3:6) type C1 (for even finish on both the faces) and RCC cover (1:2:4) type B1 of size (450 x450)mm x 50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed by EIC.\nNote:- (i) 7.5 RM GI earth wire deemed to be included in quoted rates and beyond 7.5 RM wire shall be measured and paid separately.\n(ii) Earth resistance of earth pit should be not more than 02 Ohms on testing after completion. If the desired earth resistance is not obtained the earthing shall be redone at no extra cost.\n(iii) Rate quoted by the tenderer is deemed to included salt & Charcoal upto & above 450 mm top of GI Plate.\n | 6 | Each set | |
| 35 | 35 | M & L for attending day to day Street light/bldg security light/High mast light complaints (Street lights /building security light /Hight mast light fitted on poles/buildings at height up to 20 mtr from ground level), repair/replacement of unserviceable accessories like lamps, chokes, ignitor, capacitors, reflectors, acrylic covers, nuts, bolts, GI clamps, GI Bracket, cables, wires, MCB's, earthing, earthing strip, earth wire, Feeder Pillar, MCB, MCCB's, bus bars, HRC fuses, rewirable fuses, contactor, timers, connector, wires, cables glands, thimbles etc and making the street light fully functional complete all as per the instruction of JE E&M / Engineer- in- Charge including excavation, returning, filling, removing and cost of Tower wagon, cable fault locator equipment and all required tools, ladders, safety belt, labour and all other incidental operations required for execution of street light light maintenance work are included for smooth operation.\nNote: - (i) Cost of spares and accessories shall be measured and paid seperately under relevent items. \n(ii) Cost for taking down and re-fixing new parts shall be deemed to be included in the unit rate quoted.\n(iii) Recovery shall be made from Contractor @ Rs. 50/- per complaint/ Hours, if he fails to attend and rectify the complaint within 48 hours of lodging the complaint either personally / telephonically/Email. In this regard the decision of the Engr-in-Charge shall be final & binding.\n(iv) The under mentioned material under this contract ser No. 36 to 60 which are \"Supply only\" be consumed under this item described here in above. \n\n | 400 | Per complaint | |
| 36 | 36 | Supply only FTL 36 watt 4 feet long complete all as specified and directed at site. Make:- Havells Cat Part No. LHLFDLCENL7O036 or equivalent in Crompton/Philips | 5 | Each | |
| 37 | 37 | Supply only electronic ballast suitable for 1x36/40 W FTL complete all as specified and directed at site. Make : Havells Cat Part No.LHBF07104026 or equivalent in Crompton/Philips | 10 | Each | |
| 38 | 38 | Supply only copper wound Ballast 400 watt 230 volt suitable for 400 watt MH/SV lamp complete all as specified and directed at site. Make:- Havells Cat Part No.LHGMCKENEBE1400 or equivalent in Crompton/Philips | 20 | Each | |
| 39 | 39 | Supply only copper wound Ballast 250 watt 230 volt suitable for 250 watt MH/SV lamp complete all as specified and directed at site. Make:- Havells Cat Part No.LHGMCJENEAC1250 or equivalent in Crompton/Philips | 20 | Each | |
| 40 | 40 | Supply only copper wound Ballast 150 watt 230 volt suitable for 150 watt MH/SV lamp complete all as specified and directed at site.Make:- Havells Cat Part No.LHBW20115036 or equivalent in Crompton/Philips | 8 | Each | |
| 41 | 41 | Supply only copper wound Ballast 70 watt 230 volt suitable for 70 watt MH/SV lamp complete all as specified and directed at site. Make:- Havells Cat Part No.LHBW07170036 or equivalent in Crompton/Philips | 5 | Each | |
| 42 | 42 | Supply only T-5 electronic ballast suitable for 2x24 watt Fitting, complete all as specified and as directed at site. Make:- Havells Cat Part No.LHBTO1224034 or equivalent in Crompton/Philips | 90 | Each | |
| 43 | 43 | Supply only T-5 FTL 24 watt 230 volt, suitable for 2x24 /4x24 Watt fitting complete all as specified and directed at site. Make:- Havells Cat Part No. LHST 27 124699 or equivalent in Crompton/Philips | 200 | Each | |
| 44 | 44 | Supply only CFL 4 pin 36 watt 230 volt, 2 ft long complete all as specified and as directed at site. Make:- Havells /HPL/ Crompton | 120 | Each | |
| 45 | 45 | Supply only Metal hallide lamp 70 watt E-40, 230 volt complete all as specified and as directed. Make:- Havells Cat Part No.LHSM12070499 or equivalent in Crompton/Philips | 5 | Each | |
| 46 | 46 | Supply only Metal hallide lamp 150 watt E-40, 230 volt complete all as specified and directed at site. Make:- Havells Cat Part No.LHSM12015499 or equivalent in Crompton/Philips | 10 | Each | |
| 47 | 47 | Supply only Metal hallide lamp 250 watt E-40, 230 volt complete all as specified and as directed at site. Make:- Havells Cat Part No.LHLQABIGUC8O250 or equivalent in Crompton/Philips | 15 | Each | |
| 48 | 48 | Supply only Metal hallide lamp 400 watt E-40, 230 volt complete all as specified and as directed at site. Make:- Havells Cat Part No. LHLQALIGUL7O400 or equivalent in Crompton/Philips. | 10 | Each | |
| 49 | 49 | Supply only CFL lamp 85 watt built in ballast, with suitable holder 230 volt complete all as specified and directed at site. Make:- Crompton Cat Part No. CFL 65W DF 4U 6500K or equivalent in Havells/Philips | 20 | Each | |
| 50 | 50 | Supply only CFL lamp 65 watt built in ballast, with suitable holder 230 volt complete all as specified and as directed at site. Make:- Crompton Cat Part No. CFL 65W DF 4U 6500K or equivalent in Havells/Philips | 20 | Each | |
| 51 | 51 | Supply only LED driver unit suitable/ compatible for existing 60 watt LED Fittings of any make and rating complete all as specified and directed at site. | 150 | Each | |
| 52 | 52 | Supply only LED driver unit suitable/ compatible for existing 72 watt LED Fittings of any make and rating complete all as specified and directed at site. | 26 | Each | |
| 53 | 53 | Supply only LED driver unit suitable/ compatible for existing 90 watt LED Fittings of any make and rating complete all as specified and directed at site. | 50 | Each | |
| 54 | 54 | Supply only LED driver unit suitable/ compatible for existing 120 watt LED Fittings of any make and rating complete all as specified and directed at site. | 10 | Each | |
| 55 | 55 | Supply only Capacitor 20 MFD, 230 volts complete all as specified and directed at site. Make:- Havells Cat Part No. QHJPWS5020X0 or equivalent in Crompton/ Philips | 10 | Each | |
| 56 | 56 | Supply only Capacitor 33 MFD, 230 volts complete all as specified and directed at site. Make:- Havells Cat Part No. QHJPWS5033X0 or equivalent in Crompton/ Philips | 20 | Each | |
| 57 | 57 | Supply only Capacitor 42 MFD, 230 volts complete all as specified and complete all as specified and directed at site. Make:- Havells Cat Part No. QHJPWS5042X0 or equivalent in Crompton/Philips | 20 | Each | |
| 58 | 58 | Supply only Lamp holder porcelain threaded type for single ended lamp 70/150/250/400 watt SV/MH lamp complete all as specified and directed at site.\nMake:- Havells or equivalent in Crompton/Philips | 26 | Each | |
| 59 | 59 | Supply only Sodium vapour tubular Lamp 70 Watt capacity complete all as specified and directed at site.\nMake:- Havells Cat Part No.LHSS16107099 or equivalent as per list of makes. | 10 | Each | |
| 60 | 60 | Supply only Sodium vapour tubular Lamp 150 Watt complete all as specified and directed at site.\nMake:- Havells Cat Part No.LHSS16015099 or equivalent as per list of makes. | 15 | Each | |
| 61 | 61 | Supply only Sodium vapour tubular Lamp 250 Watt complete all as specified and directed at site.\nMake:- Havells Cat Part No.LHSS16025099 or equivalent as per list of makes. | 15 | Each | |
| 62 | 62 | Supply only Sodium vapour tubular Lamp 400 Watt complete all as specified and directed at site.\nMake:- Havells Cat Part No.LHss16040099 or equivalent as per list of makes. | 25 | Each | |
| 63 | 63 | Supply only Ignitor suitable for 70 to 400 W SV/MH lamp complete all as specified and directed at site.\nMake:- Havells Cat Part No.LHGEAJENNNA1999 or equivalent as per list of makes. | 120 | Each | |
| 64 | 64 | Supply only MCB SP 06 to 32 Amp 10 KA, 'C' curve 230 Volt complete all as specified and directed at site. Make:- Havells Cat Part No.DHMGCSPF006-032 or equivalent as per list of makes. | 10 | Each | |
| 65 | 65 | Supply only MCB DP 63 Amp complete all as specified and directed at site. Make:- Havells Cat Part No.DHMGCDPF063 or equivalent as per list of makes. | 5 | Each | |
| 66 | 66 | Supply only MCCB capacity 63 Amps, 415 V, 16 KA 3 pole with thimbles/lugs and nut, bolts complete all as specified and directed at site.\nMake : INDOASIAN Cat Part No.830006 or equivalent as per list of makes. | 2 | Each | |
| 67 | 67 | Supply only single core copper conductor PVC insulated unsheathed FR 1100 Volt grade 1.5 Sqmm size, multistranded complete all as specified and as directed. | 200 | Rm | |
| 68 | 68 | Supply only Heavy duty PVC Non metallic conduit of external dia 20 mm with fittings complete all as specified and directed at site. | 120 | Rm | |
| 69 | 69 | Supply only T-5 electronic ballast suitable for 2x28/ 4x14 watt street light Fitting, complete all as specified and directed at site. Make:- Havells Cat Part No. LHBT01228033 or equivalent as per list of makes. | 10 | Each | |
| 70 | 70 | Supply Only T-5 FTL 14 watt 230 volt, suitable for 2x14 /4x14 Watt fitting complete all as specified and directed at site. Make:- Havells Cat Part No. LHST 27 114699 or equivalent as per list of makes. | 10 | Each |
AI Tender Summary
Tender Timeline
Nov 12, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 21, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender