Providing Fhtc At Surface Water Based Water Supply Scheme ( Northern Sector ) , Part-I , Zone-I Within Kaliganj Block ( Phase-B ) In Nadia District Under Nadia Division P . H . E . Dte .
Tender Value
97.11 Lakhs
Estimated cost
Bid Submission
14 Dec 2020
0 days left
EMD
1.94 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KALIGANJ → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Fhtc At Surface Water Based Water Supply Scheme ( Northern Sector ) , Part-I , Zone-I Within Kaliganj Block ( Phase-B ) In Nadia District Under Nadia Division P . H . E . Dte .
BOQ
| Name of Work: Providing FHTC at Surface Water Based Water Supply Scheme (Northern Sector), Part-I, Zone-I within Kaliganj Block (Phase-B) in Nadia District under Nadia Division P.H.E. Dte | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing FHTC from the existing CI/DI/uPVC/HDPE/GI/AC distribution pipeline by installing 10 mm NB Gun-metal Ferrule conforming to IS 2692:1989 with latest amendments on the said pipeline with supply, fitting & fixing of all other accessories like saddle piece of required size to fit the existing distribution pipeline, specials, nut & bolts, rubber sheet, washers etc and supply & laying of 15mm NB PVC (schedule 80)/20mm OD HDPE (PE100, PN16) pipe (average 15m length) with all necessary in all sorts of soil and filling up trenches as per direction of the Engineer-in-charge and upto a point just inside the premises of the household or as directed by EIC. Supply and installation of a 15mm dia. alloy iron Bib Cock (tested to 21 Kg/cm2) above 1.0 Mtr. from ground, an alloy Stop Cock of 15 mm dia. with brass spindle (tested to 21 Kg/cm2) to be fitted in a position as directed by E.I.C. G.I pipe of TATA make (medium duly) of 2 metre length with all necessary specials to continue from the end of the HDPE/PVC pipe and upto 1.0 m above ground within the premises of household. | |||
| 2 | 1.1 | Note : 1. PVC pipe shall of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 2. Rate is exclusive of supply and delivery of 10mm NB gun-metal Ferrule. 3. Payment of supply & laying of 15mm NB PVC (schedule 80)/20mm OD HDPE (PE100, PN16) pipe with all necessary specials 1.0 metre below the ground will be made on actual measurement basis. The rate of this item is Rs. 117/- per metre. | 2026 | No. | |
| 3 | 2 | Supply and delivery of 10 mm NB Gun-metal Ferrule conforming to IS 2692:1989 with latest amendments. | 2026 | No. | |
| 4 | 4 | Collection of House Hold Details at Prescribed format through Mobile App / Hard Copy including Geo reference as directed by EIC and submission the same to PHE Dte. in soft copy | 2026 | Nos. | |
| 5 | 5 | Making Village Road (average 3m width) crossing by horizontal auger boring for accomodation of laying of average 3 (three) Mtr. 15mm dia GI pipes for FHTC or as per direction of E-I-C. (Total Considered House Hold x 50%) - Nos of 80mm Dia Road xing) x 3 Nos. Avg. | 3009 | Mtr. | |
| 6 | 6 | Labour for boring(horizontal) through any kind of soil for road crossing LDS including hire charges & labour for supply of suitable dia crossing upto full width road with necessary tools, ackles, including.necessary arrangement for boring & pushing reqd. including fixing,jointing,pumping out accumulated water, lighting arrangement ,sealing of two casing ends by B/W (1:4) etc. as per direction of EIC.(B/W to be given seperately). | |||
| 7 | 6.1 | a) 80 mm dia (10 nos X 5.0 Mtr = 50.00 Mtr) | 50 | Mtr. | |
| 8 | 7 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 mtr for laying all dia pipe line in ground floor, upto 150 mm thick (item no-13 of PHE SOR , Section B-2) | 4.5 | Cum | |
| 9 | 8 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. | |||
| 10 | 8.1 | a) Pakur Variety | 4.5 | Cum | |
| 11 | 9 | Supplying,fitting and fixing brass ferrule including connection with UPVC/CI/AC/DI/GI upto 450 mm long with plumbing joint, brass over C.P. coupling at both ends, with cap and lining screw, jamnut, socket etc. complete in all respect including cutting trenches in all sorts of soil and filling up the trenches as per direction of EIC. (PWD Schedule rate). | |||
| 12 | 9.1 | i) 25 mm dia | 10 | No | |
| 13 | 10 | Supplying, fitting and fixing PVC pipes for underground work ofapproved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). withall necessary accessories, specials viz. socket, bend, tee, union, cross,elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc.fitted including cost of all materials ,jointing materials, cutting pipes,making threads ,cutting trenches upto 1.5 metre below surface in all sortsof soil and refilling the same as directed complete in all respect. (Paymentwill be made on the centre line measurement of the total pipe lineincluding all specials No separate payment will be made for accessories,specials.) | |||
| 14 | 10.1 | i)25 mm dia PVC pipes | 1602 | Mtr. | |
| 15 | 10.2 | ii)40 mm dia PVC pipes | 1681 | Mtr. | |
| 16 | 11 | Total Amount | 1 | LS | |
| 17 | 11.1 | Add : GST | 8.58509e+06 | No | |
| 18 | 11.2 | Add : CESS | 9.6153e+06 | No |
AI Tender Summary
Tender Timeline
Nov 11, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedDec 14, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 17, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender