| 1 | 1 | PART-A - CONSTRUCTION OF 30,000 LTR. CAPACITY ELEVATED STORAGE RESERVOIR (E.S.R) WITH 10.00 MTR. STAGING - Designing, Testing and commissioning of R.C.C clear water Elevated Storage Reservoir of 30,000 ltr. Capacity with suplying fitting, fixing of all materials, labour , taxes . Schedule for payment on percentage breakage (a) On approval of Design & Drawing after soil test- 1% (b) Cumulative 40% on completion of foundation and 50% work of staging height of the structure (c) Cumulative 60% on completion of 100% staging height of structure (d) Cumulative 80% on completion of ring beam, lower dome, side wall and uppper dome (e) Cumulative 100% on completion of the structure including commissioning and testing . N.B-The agreement for this portion of work (part-A) will be drawn on SUM CONTRACT\" basis (G2) and the tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the E.S.R after making Agreement with the Executive Engineer, RWS&S Division, Phulbani before execution of the work. | | 1 | Each |
|---|
| 2 | 2 | PART- (B) ACCESSORIES (P1 Agreement) (i) Supplying all materials, labour & T&P for fabricating, fitting, fixing of 32mm G.I pipe as hand railing to balcony, stair case with cost of pipe , labour for fixing, taxes complete. (Medium class ISI marked G.I pipes to be used) | | 152 | Mtr. |
|---|
| 3 | 3 | (ii) Fabrication | | 50 | Kg. |
|---|
| 4 | 4 | (iii) 80mm dia G.I pipes (medium grade, ISI marked) | | 60 | Mtr. |
|---|
| 5 | 5 | (iv) 80mm dia x 8mm thick G.I Flange | | 16 | Each |
|---|
| 6 | 6 | (v) 80mm dia, 0.30 mtr long 90°/45° Plain Bend | | 5 | Each |
|---|
| 7 | 7 | (vi) Supplying fitting, fixing of lightening arrestor with copper conductor (to be paid as per actual on production of purchase voucher) as per specification. | | 1 | Each |
|---|
| 8 | 8 | (vii) Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (IS14846-2000) and subsequent ammendment if any) and nominal dia meter including cost of cast iron sluice valves, nuts, bolts , rubber insertion as per specification complete. 80mm dia sluice valve (P.N 1.6) | | 3 | Each |
|---|
| 9 | 9 | (viii) Supplying fitting, fixing of water level indicator inside the container as per specification. | | 1 | Each |
|---|
| 10 | 10 | (ix) Supplying all materials, labour and T&P for providing Aluminium ladder of 3.00 mtr length x 0.45m width including fixing inside the container etc. all complete as per specification. | | 1 | Each |
|---|
| 11 | 11 | (x) Supplying all materials, labour and T&P for providing M.S ladder of 3.00 mtr length x 0.45m width including fixing outside the container etc. all complete | | 1 | Each |
|---|
| 12 | 12 | (xi) Providing and fixing single Air Valve for water works purposes for the following dia meter including drilling the water main (cast iron or pipes with metal straps) but excluding the cost of air valve and metal straps as per specification complete - 15mm dia | | 1 | Each |
|---|
| 13 | 13 | Supplying all materials, labour, T&P for constructing chambers of size 0.90mX0.90mX1.05m (inside size) for SLUICE VALVES / NON RETURN VALVES with 10.00cm thick precast cement concrete cover slab with CC (1:2:4) mix. Earthwork in hard soils for excavation of foundation 0.10mtr thick, foundation concrete (1:4:8) with 40mm size HBHG metal, 250mm thick brick work with CB bricks of size 25cmX12cmX8cm having crushing strength not less than 75kg/cm2 in cement mortar of proportion (1:6) in the walls of the chambers and inside plastering with 12mm thick CP(1:4) finished smooth with floating coat of neat cement punning including curing as per approved drawing and specification including cost, conveyance, royalties and taxes of all materials, labour, T&P as required for the work complete as per direction of the concerned Engineer-in-charge. | | 3 | Each |
|---|
| 14 | 14 | Laying of G.I Rising main Providing and laying fabricated G.I pipes and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance , loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , transporting & taxes, consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete . (G.I pipe of TATA / JINDAL make ISI marked medium class and specials to be supplied by the contractor). (The pre inspection report will be given by the manufacturer and it will be submitted by the contractor before laying of the pipes) (a) 80mm dia G.I pipes (medium grade, ISI marked) | | 160 | Mtr. |
|---|
| 15 | 15 | Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate , gas cutting to required size, rolling, tack welding, assembling to required size , welding on automatic welding machine including cost of materials , T&P consumables and jointing materials as required including hire and depriciation charges of machinaries & T&P materials such as Generators , welding machine etc. all complete as directed by the concern Engineer in-charge including conveyance of the same to the work site , unloading and stacking in proper position. 80mm dia x 8mm thick G.I Flange | | 10 | Each |
|---|
| 16 | 16 | 80mm dia, 0.30 mtr long 90°/45° Plain Bend | | 3 | Each |
|---|
| 17 | 17 | Providing flanged joints of the following diameter inclusive of cost of materials such as bolts , nuts, rubber insertion and PVC tailpieces as required for the work including testing of joints as per specification complete. (a) 80mm dia | | 5 | Each |
|---|
| 18 | 18 | Earthwork in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.3 mtr in depth and as per direction of Engineer-in-charge. | | 368 | 100 cum |
|---|
| 19 | 19 | Refilling the pipe line trenches with excavated earth / materials including watering and ramming as directed by Engineer-in-charge. a) In all kinds of soil | | 360.68 | 100 cum |
|---|
| 20 | 20 | Supplying all materials, labour, T&P for cutting concrete road for taking pipe line and making good to the damage including all taxes complete. | | 15 | Mtr. |
|---|
| 21 | 21 | For Distribution : Laying in trenches high density polyvenyle pipes confirming to IS 4984 - 1995 and specials of following outside diameter and class-1 to class-3 and jointing by Fusion welding method including testing as per specification complete. (a) 90mm dia high density polyvenylene pipes PN 6.0 (PE-80) | | 1150 | Mtr. |
|---|
| 22 | 22 | Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (IS14846-2000) and subsequent ammendment if any) and nominal dia meter including cost of cast iron sluice valves, nuts, bolts , rubber insertion as per specification complete. (a) 80mm dia (PN-1.6) Sluice valve | | 4 | Each |
|---|
| 23 | 23 | Providing and fixing swing check type reflux valves (Non Return Valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-2004 part-I and subsequent ammendment if any) and nominal diameter including cost of reflux valves, nuts, bolts and rubber insertion as per specification complete. (a) 80mm Dia | | 1 | Each |
|---|
| 24 | 24 | Providing and fixing 15mm dia single Air Valve confirming to IS 14845-2000 for water works purposes for the following dia meter including drilling the water main (cast iron or pipes with metal straps) including the cost of air valve metal straps, required size of PVC saddle, G.I.Nipple etc. as per specification complete. | | 1 | Each |
|---|
| 25 | 25 | Supplying all materials, labour, T&P for providing individual house connection from shaddle point to tap point with required length of pipes & specials including earth work excavation & refilling including cost of all required materials etc. complete. | | 96 | Each |
|---|
| 26 | 26 | For Distribution : Laying in trenches high density polyvenyle pipes confirming to IS 4984 - 1995 and specials of following outside diameter and class-1 to class-3 and jointing by Fusion welding method including testing as per specification complete. (a) 20mm dia high density polyvenylene pipes PN 10.0 (PE-80) | | 729.75 | Mtr. |
|---|
| 27 | 27 | Supplying all materials, labour, T&P for cutting concrete road for taking pipe line and making good to the damage including all taxes complete. | | 138.75 | Mtr. |
|---|
| 28 | 28 | Internal Electrification : Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge. | | 10 | Mtr. |
|---|
| 29 | 29 | Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge. | | 2 | Each |
|---|
| 30 | 30 | Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required | | 7 | Mtr. |
|---|
| 31 | 31 | Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. (a) 32 Amp D.P.main switch with porcelain base | | 1 | Each |
|---|
| 32 | 32 | Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. (a) 63Amp TPN Main switch | | 1 | Each |
|---|
| 33 | 33 | Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections. | | 1 | Set |
|---|
| 34 | 34 | Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections. | | 1 | Set |
|---|
| 35 | 35 | Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required. (a) 250mmx200mmx75mm | | 1 | Each |
|---|
| 36 | 36 | (b) 180mmx100mmx60mm | | 1 | Each |
|---|
| 37 | 37 | Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required (a) 4x10 sqmm + 2x6 sqmm | | 5 | Mtr. |
|---|
| 38 | 38 | 3x10 sqmm + 1x6 sqmm | | 5 | Mtr. |
|---|
| 39 | 39 | 2x4 sqmm + 1x2.5 sqmm | | 2 | Mtr. |
|---|
| 40 | 40 | 2x2.5 sqmm + 1x1.5 sqmm | | 5 | Mtr. |
|---|
| 41 | 41 | 3x1.5 sqmm + 1x1.5 sqmm | | 2.5 | Mtr. |
|---|
| 42 | 42 | Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge. (a) Short point | | 2 | Each |
|---|
| 43 | 43 | Medium point | | 1 | Each |
|---|
| 44 | 44 | Long point | | 1 | Each |
|---|
| 45 | 45 | Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge. | | 2 | Each |
|---|
| 46 | 46 | Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. (a) 5 / 6 Amp one way switch (Piano type) | | 5 | Each |
|---|
| 47 | 47 | 3 Pin 5/6 socket outlet (piano tytpe) | | 1 | Each |
|---|
| 48 | 48 | Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required. | | 15 | Mtr. |
|---|
| 49 | 49 | Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required | | 0.3 | Mtr. |
|---|
| 50 | 50 | Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc. but with charcoal and salt as required. | | 1 | Each |
|---|
| 51 | 51 | PROCUREMENT OF SUBMERSIBLE PUMP ITS ACCESSORIES INCLUDING COST OF LOWERING (The materials included with all taxes Supply of open well submersible pump sets of any reputed make like KSB / Crompton / CRI / Kirloskar confirming to relevant IS specification IS:14220 for installing in the production well / percolation well. Cost of pump to be paid as per actual on production of purchase voucher. (Head and discharge of pump should be confirmed with Engineer in charge) a) Open well submersible vertical pump 3.00 H.P (Head 55 mtr. Discharge - 2.50 LPS 3 phase) | | 1 | Each |
|---|
| 52 | 52 | Supply of three phase Star DeltaControl panel suitable for above submersible pump fitted with voltmeter, Ampere meter, Selector switch, Main switch, Fuses, Indicator, connector, On/Off switch with Starter component with over load Protection and single phase preventor enclosed in a sheet steel enclosure of any reputed make (like BCH / Switch & Gear / L&T / Havells etc.).(To be paid as per actual on production of valid purchase voucher) | | 1 | Each |
|---|
| 53 | 53 | Supplying of following accessories required for pump lowering in to percolation well / Production well of good quality etc. (a) 6mm2x3 core flat submersible copper cable of reputed make like Finolex / Havells / BCH etc. | | 30 | Mtr. |
|---|
| 54 | 54 | (b) 50mm dia M.S D/F column pipe each 3 mtr. long. | | 3 | each |
|---|
| 55 | 55 | Supplying all labour, T&P for lowering of submersible pump in open well to a suitable depth below ground level including fixing of control panel, making necessary connecting of pump with electric main, colujmn pipe with jointing the same with the rising main including transportation to work site and testing and commissioning of the pump etc. complete as per direction of Engineer in charge. | | 1 | each |
|---|
| 56 | 56 | Construction of percolation well - Earthwork in openwell excavation in hard or gravely soil including dressing & levelling depositing the soil and breaking clods within 50m initial lead and initial lift of 1.5m and as per direction of Engineer-in-charge. (i) 1st depth of 1.5m | | 83.16 | 100 cum |
|---|
| 57 | 57 | ii) 2nd depth of 1.5m | | 83.16 | 100 cum |
|---|
| 58 | 58 | Earthwork in openwell ecavation in stoney earth and gravel mixed with stone boulders not exceeding 0.014cum in volume within 50m initial lead and extra lift as per requirement including rough dressing, levelling and breaking colds to maximum 5cm to 7cm and depositing the soil within 50m lead etc complete as per direction of Engineer-in-charge. (iii) 3rd depth of 1.5m | | 83.16 | 100 cum |
|---|
| 59 | 59 | iv) 4th depth of 1.5m | | 71.7 | 100 cum |
|---|
| 60 | 60 | v) 5th depth of 1.5m | | 71.7 | 100 cum |
|---|
| 61 | 61 | vi) 6th depth of 1.5m | | 61.1 | 100 cum |
|---|
| 62 | 62 | Earthwork in cutting in disintigrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately etc. complete as per direction of Engineer in-charge. (vii) 7th depth of 1.5m | | 36.66 | 100 cum |
|---|
| 63 | 63 | Providing dry stone masonry or rough stone dry masonry in well staining using HG stones of approved quality below ground level beyond 4.5mtr depth to 7.5 mtr with all labour, T & P, including cost, conveyance, royalities & taxes of all materials required for the work etc. complete as per direction of Engineer in charge. | | 36.53 | Cum |
|---|
| 64 | 64 | Labour charges for providing strong, rigid, levelled, and plumbed centering & shuttering to required shape and size with all necessary bracing and ties and support with levelled centering including dismentalling the same after the required interval from the date of casting including cost of materials, labour & T & P required for the work etc complete as per direction of Engineer in charge. R.C.C beam bracing (a) Beyond 4.5m upto 7.5m depth below ground level | | 7.42 | Sqm |
|---|
| 65 | 65 | b) Beyond 1.5m upto 4.5m depth below ground level | | 7.42 | Sqm |
|---|
| 66 | 66 | c) Within 1.50 m | | 7.23 | Sqm |
|---|
| 67 | 67 | d) Top Bracing | | 8.66 | Sqm |
|---|
| 68 | 68 | Supplying all materials, labour, T&P and providing RCC work of (1:1½:3) grade with 12mm size crusher broken black hard granite chips including hoisting and laying, cost, conveyance, royalities and taxes of all materias, labour, T&P required for the work etc. (a) Beyond 4.5m upto 7.5m depth below ground level | | 6.68 | Cum |
|---|
| 69 | 69 | b) Beyond 1.5m upto 4.5m depth below ground level | | 2.71 | Cum |
|---|
| 70 | 70 | c) Within 1.50 mtr | | 2.76 | Cum |
|---|
| 71 | 71 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 18 to 20 gauge in open well construction at all depths as per direction of E.I.C. | | 7.17 | Qntl |
|---|
| 72 | 72 | Providing RRHG Stone Masonary in CM (1:6) in well steining of layer not exceeding 30cm using HG stone of approved quality from approved quarry inclding mixing of mortar, breaking of stone as per required size, laying, watering and curing, including cost, conveyance, royalty, taxes, labour & T&P. (a) Work Beyond 4.50m upto 7.5m depth below ground level | | 46.55 | Cum |
|---|
| 73 | 73 | b) Work Beyond 1.50m & up to 4.5m depth below ground level | | 37.77 | Cum |
|---|
| 74 | 74 | c) Work within 1.50m | | 26.22 | Cum |
|---|
| 75 | 75 | Providing metal spall backing in rear side of the well staining using 5cm HG metal including all cost of materials, labour, T&P, etc complete as per direction of Engineer-in-charge. | | 9.68 | Cum |
|---|
| 76 | 76 | Refilling foundation and plinth with excavated earth around well staining including watering and ramming as per direction of Engineer-in-charge. (in hard and gravelly soil) | | 132.12 | 100 Cum |
|---|
| 77 | 77 | Filling in foundation and plinth with sand including watering and ramming as directed by Engineer-in-charge. | | 6.88 | Cum |
|---|
| 78 | 78 | Providing 20mm thick cement plaster (1:4) in well steining, racking out joints, including scrapping and cleaning the surface and finishing smooth to proper plumb and levels and providing grooves, all T & P etc including cost, conveyance, royalities and taxes of materials, labour, T&P required for the works etc. complete. | | 50.13 | Sqm |
|---|
| 79 | 79 | Provision for cost of dewatering from the well including hire and running charges of 5HP diesel engine pump sets, and other devices as required to suit the site condition including disposal of the water to a safe distance and cost of all machinary, labour, T&P, transportation, etc complete. | | 210 | Hour |
|---|
| 80 | 80 | Supplying all materials, labour, T&P and providing C.C of proportion (1:4:8) using 40mm size HG chips including cost, conveyance , royalty etc. complete. | | 3.01 | Cum |
|---|
| 81 | 81 | Fitting & Fixing of M.S walkway and Cover plate : Supply all materials, labour, T&P, welding rod , gas etc. fabricating and welding of different size of G.I pipe Angle, Joist, channel, flat of 4mm thickness for G.I. walk way & well cover including filling cavities / gap with C.C (1:2:4), priming, painting two coats with approved enamel paint on the top of the cover etc. complete as per the direction of the Engineer in-charge. (a) M.S Channel 100x50x50x6mm | | 353.72 | Kg. |
|---|
| 82 | 82 | (b) M.S Angle of size 60x60x6mm | | 73.44 | Kg. |
|---|
| 83 | 83 | (c) M.S Angle of size 50x50x6mm | | 342 | Kg. |
|---|
| 84 | 84 | (d) M.S Angle of size 25x25x5mm | | 8.5 | Kg. |
|---|
| 85 | 85 | (e) 2.5mm thick M.S. Plate | | 700.05 | Kg. |
|---|
| 86 | 86 | Supply all materials, labour, T&P, taxes, welding rod , gas etc. fabricating and welding of different size of M.S pipe Angle, Joist, channel, flat for 5.00 mtr. dia Intake well to prevent entry of foreign materials making convenient for installation or withdrawing of pumping set including painting two coats with approved enamel paint on the top of the cover etc. complete as per the direction of the Engineer in-charge. (a) 80mm G.I. Pipe for chain pully stand | | 11 | Mtr. |
|---|
| 87 | 87 | 40mm G.I Pipe for railing | | 56.91 | RMT |
|---|
| 88 | 88 | Painting two coats with any approved enamel paint over a coat of primer including cost of all materials, labour, T&P etc. complete. | | 35.9 | sqm |
|---|
| 89 | 89 | CONSTRUCTION OF PUMP CHAMBER Earth work in excavation of foundation in hard soil within 50m initial lead and 1.5m initial lift including rough dressing and leveling the bed with all taxes as per direction of engineer in Charge. | | 10.35 | 100 cum |
|---|
| 90 | 90 | Providing & laying cement concrete of proportion 1:4:8 of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer in Charge. | | 2.47 | Cum |
|---|
| 91 | 91 | Providing and constructing Random rubble H.G. stone masonry at foundation & plinth in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer in charge. | | 9.45 | Cum |
|---|
| 92 | 92 | Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P . Taxes , watering & ramming etc. complete. | | 6.98 | Cum |
|---|
| 93 | 93 | Rigid and Smooth Centering and Shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials complete. I) Plinth Beam | | 4.5 | Sqm |
|---|
| 94 | 94 | II) Lintels | | 3.713 | Sqm |
|---|
| 95 | 95 | III) Chajja Roof Slab | | 16.515 | Sqm |
|---|
| 96 | 96 | Providing & laying R.C.C.( 1:1½: 3 ) using 12mm size C.B Hard Granite C.B.Chips, including centering & shuttering, laying, consolidating, curing etc. (excluding reinforcement ) including cost of all materials, labour, T&P, taxes, transportation etc. complete as per direction of engineer in Charge. | | 2.914 | Cum |
|---|
| 97 | 97 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 18 to 20 gauge. | | 2.62 | Qntl |
|---|
| 98 | 98 | Well burnt C.B Brick work in C.M (1:6)with (25x12x8cm) size C.B bricks having crushing strength not less 35/cm2 in superstructure including cost, conveyance, royalties etc. complete | | 10.522 | Cum |
|---|
| 99 | 99 | Providing and applying bearing coat with 12mm thick cement plaster (1:4) over brick/ Concrete work with cement punning, bitumen painting over top wall including cost, conveyance, royalty and taxes. | | 3.75 | Sqm |
|---|
| 100 | 100 | Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required complete and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete asper direction of engineer in Charge. | | 40.59 | Sqm |
|---|
| 101 | 101 | Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer. | | 49.6 | Sqm |
|---|
| 102 | 102 | Providing and applying cement plaster 20mm thick at all floors in cement mortar 1:6 in brick/ concrete / stone surface finishing smooth to correct line, level plans & plumb as required complete and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer. | | 12.6 | Sqm |
|---|
| 103 | 103 | 2.5cm A.S. flooring with C.C. (1:2:4) including punning using 12mm size CBG chips including cost of materials, labour, T&P , taxes & royalty etc. | | 13.7 | Sqm |
|---|
| 104 | 104 | Painting with best quality cement based water repellent paint of super snowcem or any other approved equivalent manufacture in two coats on new plastered surfaces of required shade & colour over one coat of cement washing including providing necessary scaffolding, cleaning the surface with water to remove all coating dust, filling up cracks, crevices the surface etc. including cost of all materials, labour, T&P, brush putty, taxes etc. complete. | | 114.79 | Sqm |
|---|
| 105 | 105 | Providing, fabricating and fixing in position MS railing grill in entrance gate & Collapsible Door with MS sections, Flat angles, channels MS sheet etc. as per drawing including anchor bolt and both side locking arrangement, roller and rail etc. grouting the anchor bolt and rail matching to the levels with P.C.C. (1:2:4) including cost of all materials, labour, taxes, fabrication, Transportation etc. complete. (i) M.S. Frame with Shutters, ventilators, Grill window | | 188.25 | Kg. |
|---|
| 106 | 106 | Labour charges for Fixing of M.S. Doors & Grills. In Ground Floor. (i) M.S.Frame shuter & Grills | | 4.53 | Sqm |
|---|
| 107 | 107 | Painting two coats with any approved enamel paints over a coat of primer including cost of all materials and labour charges putty, brushing ,taxes etc. complete | | 9.86 | Sqm |
|---|
| 108 | 108 | 12mm thick cement plaster in C;M (1:4) including cost, conveyance, royalty , taxes of all materials etc. complete. | | 18.24 | Sqm |
|---|
