Construction Of Sub District Hospital At D . H Pora , Kulgam ( Balance Work ) Construction Balance Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2020
0 days left
EMD
6.15 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
DH_Pora_Kulgam → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Sub District Hospital At D . H Pora , Kulgam ( Balance Work ) Construction Balance Work
BOQ
| Name of Work: Construction of Sub District Hospital at D.H Pora,Kulgam (Balance Work) Adv. Cost: 307.60 lacs. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including all carriages of materials involved. | BI01010001010000000000000515BI0100001129 | 833.25 | Cum |
| 2 | 2 | 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6(1 cement:6 coarse sand) including all carriages complete. | BI01010001010000000000000515BI0100001130 | 3580.29 | Sqm |
| 3 | 3 | 12 mm cement plaster of mix 1:4(1 cement:4 coarse sand) including all carriages complete. | BI01010001010000000000000515BI0100001131 | 2565 | Sqm |
| 4 | 4 | Structural steel work welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position including applying a priming coat of approved steel primer all complete including all carriages leads lifts etc. | BI01010001010000000000000515BI0100001132 | 65.49 | MT |
| 5 | 5 | Providing colour coated (HI rib)G. S. sheet roofing fixed with GI self screws with pvc caps of matching colour design and pattern as per directions of Engineer-in -charge bolts and nuts excluding the cost of purlins,rafters and trusses 0.50mm thick including carriages all complete. | BI01010001010000000000000515BI0100001133 | 1687.82 | Sqm |
| 6 | 6 | Providing coloured ridges /hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks , bolts and nuts 8mm dia GI limpet and Bitumen washers complete 0.50 mm thick including carriages Complete | BI01010001010000000000000515BI0100001134 | 225 | Rm |
| 7 | 7 | Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 marked indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and base support for tank(Sintex,Electroplat,Star,Lotus or equivalent having valid ISI license) including all carriages. | BI01010001010000000000000515BI0100001135 | 12000 | litre |
| 8 | 8 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class Kail wood (imported) including all carriages.. | BI01010001010000000000000515BI0100001136 | 1 | Cum |
| 9 | 9 | Providind and fixing 35 mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws excluding panelling/glazing which will be paid separetely ,all complete including carriages as per direction of engineer-in-charge First class kail wood (imported) | BI01010001010000000000000515BI0100001137 | 15.35 | Sqm |
| 10 | 10 | Providing and fixing 35 m thick wire guaze shutters using galavanised M.S wire guaze of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors,windows and clerestory windows with ISI marked M.S pressed bright finished butt hinges with b necessary screws of required size including carriages complete First class kail wood (imported). | BI01010001010000000000000515BI0100001138 | 5.58 | Sqm |
| 11 | 11 | P/F of 12 mm thick teak wood of approved brand /shade for door panels including required size of wooden beadings etc complete as directed by Engineer in charge. | BI01010001010000000000000515BI0100001139 | 84 | Sft |
| 12 | 12 | Providing and fixing of 3.5mm thick ordinary sheet glass pans to windows and ventillator shutters embeded in putty and fixed with beadings including cost of nails etc and carriages complete | BI01010001010000000000000515BI0100001140 | 11 | Sqm |
| 13 | 13 | Providing and fixing of Almunium hardware fittings to doors and windows of approved quality (ISI mark) approved by the site Engineer including all carriages. | BI01010001010000000000000515BI0100001141 | ||
| 14 | 13.01 | Tower bolts 4\" | BI01010001010000000000000515BI0100001142 | 20 | no |
| 15 | 13.02 | Tower bolt 6\" | BI01010001010000000000000515BI0100001143 | 20 | no |
| 16 | 13.03 | L Drop 10\" | BI01010001010000000000000515BI0100001144 | 4 | no |
| 17 | 13.04 | Handles 4\" | BI01010001010000000000000515BI0100001145 | 15 | no |
| 18 | 13.05 | Handle 5 \" | BI01010001010000000000000515BI0100001146 | 15 | no |
| 19 | 14 | Cement concrete flooring 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. Complete. 50mm thick with 20mm nominal size stone aggregate(Crushed) including all carriages complete\n | BI01010001010000000000000515BI0100001147 | 18.45 | Sqm |
| 20 | 15 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to 13:15622of approved make in all colours and shades, laid on 20mmthick cement mortar 1:4 (I cement :4 coarse sand)including grouting the joints with white cement andmatching pigments etc. including all carriages complete\n | BI01010001010000000000000515BI0100001148 | 1410.78 | Sqm |
| 21 | 16 | Providing and fixing ceramic glazed tiles (non-skid)300*300 mm(thickmness to be specified by the manufacturers) of 1st quality conforming to IS:13755 of NITCO,ORIENT,SOMANY,KAJARIA,or equivalent make in all colours,such as White,Ivory,Grey,Fume red,Brown sizelaid on 20 mm thick bed of Cement Mortar 1:4 (1 cement:4 coarse sand) and jointed with white cement and matching pigment etc complete including all carriages. | BI01010001010000000000000515BI0100001149 | 384.75 | Sqm |
| 22 | 17 | Providing and fixing Ist qualityCeramic glazed (digital)wall tiles confirming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except begundy,bottle green,black of any size as approved by Engineer in charge in skirting ,risers of steps and dados over 12 mm thick cement Mortar 1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade (size of tile as specified by the site Engineer) including all carriages complete\n\n | BI01010001010000000000000515BI0100001150 | 1931.39 | Sqm |
| 23 | 18 | P/F in position 18 mm thick Granite of approved colour,shade and texture in flooring,landings,stairs(risers and threads)skirting /dadoo etc laid on 20 MM thick 1:3 cement mortar incl:filling the joints with cement grouting mixed with colour pigmentation complete.Pattern of shade ,design as per the direction of i/c site engineer including all carriages complete. | BI01010001010000000000000515BI0100001151 | 769.7 | Sqm |
| 24 | 19 | Providing double edge moulding to 18 mm thick granite stone counters,vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design as approved by Engineer-in-Charge. | BI01010001010000000000000515BI0100001152 | 151.21 | Rm |
| 25 | 20 | Providing and applying white cement based putty (Birla or equivalent )of 2mm thickness over plastered surface to prepare the surface even and smooth including all carriages complete\n | BI01010001010000000000000515BI0100001153 | 4713 | Sqm |
| 26 | 21 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.New work (two or more coats) over and inluding priming coat with cement primer including all carriages.\n\n | BI01010001010000000000000515BI0100001154 | 4713 | Sqm |
| 27 | 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages. \n | BI01010001010000000000000515BI0100001155 | 1269.07 | Sqm |
| 28 | 24 | P/F of 50mm dia stainless steel railing of 304 grade of hollow tube 1.6 mm thick of jindal/salem make or equivalent incl:welding and fixing with stainless steel machine screws for making required size and shape,buffing etc. complete and fixing stainless steel balusters upto 900mm height and S S tubes,three in one installed horizontally incl:cutting,welding,grinding to required shape and size by required steel dash fasteners,nuts, bolts,screws etc in floors and treads incl: providing S S shoe at each balusters complete as per archtectural drawings and as per directions of engineer in charge incl:cutting of granite/marble floors and fastening with lead grouting if required complete job at site of work including all carriages. | BI01010001010000000000000515BI0100001156 | 137 | Rm |
| 29 | 25 | Extra over item no (23) for main bluastter | BI01010001010000000000000515BI0100001157 | 3 | No |
| 30 | 26 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal\nsize well rammed and consolidated and grouted with fine sand including finishing the top smooth including all carriages. \n | BI01010001010000000000000515BI0100001158 | 134.75 | Sqm |
| 31 | 27 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions, at top, bottom and sides with required EPRM rubber/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion/shutters of doors,windows and ventillators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required. Powder coated Almunium (minimum thickness of powder coated of 50 microns) Jindal or equivalent make including all carriages.\n | BI01010001010000000000000515BI0100001159 | 7710 | kg |
| 32 | 28 | P/F 12 mm thick pre laminated particle board (with decorative lamination of both sides) of approved brand flat pressed three layer or graded wood particle board in panelling fixed in almunium doors window shutters and partition frames with CP brass /stainkless teel screws comolete as per architectural drawings including rubber gaskets ,almunium beadings and required accessories as per pattern directed at site by Engineer in charge all complete | BI01010001010000000000000515BI0100001160 | 83.23 | Sqm |
| 33 | 29 | Providing and fixing glazing in aluminium door,window,ventillator shutters and partitions etc.with EPDM rubber/neoprene gasket etc.complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of almunium snap beading shall be paid in basic item) With floating glass panes of 5.5 mm thickness (weight not less than 13.5 kg/sqm) including all carriages. | BI01010001010000000000000515BI0100001161 | 38.08 | Sqm |
| 34 | 30 | Earth work in excavation by manual/mechanical means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan/over areas (exceeding 30 cm and upto 1.5 m in depth,1.5 m in width as well as 10 sqm on plan ) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 5km from site /edge cutting or as directed by EIC. disposed earth to be leveled and neatly dressed in all kinds of soil including pumping out water caused by springs,tidal or river seepage,broken water means or drains and the like complete during execution of work. | BI01010001010000000000000515BI0100001162 | 197.52 | Cum |
| 35 | 31 | Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete. | BI01010001010000000000000515BI0100001163 | 5.34 | Cum |
| 36 | 32 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved. | BI01010001010000000000000515BI0100001164 | 3.56 | Cum |
| 37 | 33 | Reinforced cement concrete work in walls (any thickness),including attached pilasters,buttressesplinth,suspended floors ,etc upto floor five level excluding cost of centring,shuttering,finishing and reinforcement in 1:1.5:3 (1 cement:1.5 cooarse sand:3 graded crushed stone aggregate 20 mm nominal size) including all carriages complete. | BI01010001010000000000000515BI0100001165 | 29.4 | Cum |
| 38 | 34 | Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo Mechanically Treated bars. including all carriages . | BI01010001010000000000000515BI0100001166 | 2940 | kg |
| 39 | 35 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, walls,plinths. using 12mm ply including all carriages. | BI01010001010000000000000515BI0100001167 | 199.15 | Sqm |
| 40 | 36 | 12 mm cement plaster of mix 1: 3(1 cement:3 coarse sand) finished with the floating coat of neat cement including all carriages complete . | BI01010001010000000000000515BI0100001168 | 72.54 | Sqm |
| 41 | 37 | Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone including all carriages. | BI01010001010000000000000515BI0100001169 | 55.56 | Cum |
| 42 | 38 | Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand), RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size), 200mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand), finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size), neatly finished complete as per standard design including excavation, refilling and disposal of surplus earth. Inside size 45X45 cms and 30cms deep including SFRC cover) with frame including all carriages. | BI01010001010000000000000515BI0100001170 | 20 | No |
| 43 | 39 | Providing and fixing of GI pipe lines to walls/ceilings/floors (Class B )Prakash Surya /Jindal or equivalent including GI Fittings jointing,testing and making good the surface as directed by the site engineer including all carriages complete job | BI01010001010000000000000515BI0100001171 | ||
| 44 | 39.01 | 15 mm dia | BI01010001010000000000000515BI0100001172 | 350 | Rm |
| 45 | 39.02 | 20 mm dia | BI01010001010000000000000515BI0100001173 | 150 | Rm |
| 46 | 39.03 | 25 mm dia | BI01010001010000000000000515BI0100001174 | 20 | Rm |
| 47 | 40 | Providing and fixing GI pipe fittings of specified brand (ISI mark UNIK/Nike/Prince or equivalent including testing and commissioning and all carriages complete. | BI01010001010000000000000515BI0100001175 | ||
| 48 | 40.01 | 15 mm dia Ball Value Brass (Heavy Duty) | BI01010001010000000000000515BI0100001176 | 6 | No |
| 49 | 40.02 | 20 mm dia Ball Value Brass (Heavy Duty) | BI01010001010000000000000515BI0100001177 | 12 | No |
| 50 | 40.03 | 25 mm dia Ball Value Brass (Heavy Duty) | BI01010001010000000000000515BI0100001178 | 2 | No |
| 51 | 40.04 | 15 mm Tanki nipple | BI01010001010000000000000515BI0100001179 | 6 | No |
| 52 | 40.05 | 20 mm Tanki nipple | BI01010001010000000000000515BI0100001180 | 12 | No |
| 53 | 40.06 | 25 mm Tanki nipple | BI01010001010000000000000515BI0100001181 | 2 | No |
| 54 | 41 | Providing and fixing of PVC pipe/ fittings of Prince/Phenolex or equivalent make of following size to soil/waste/ventellating pipes as directed by the site Engineer including all carriages. | BI01010001010000000000000515BI0100001182 | ||
| 55 | 41.01 | 100 mm dia PVC pipe | BI01010001010000000000000515BI0100001183 | 110 | Rm |
| 56 | 41.02 | 75 mm dia PVC pipe | BI01010001010000000000000515BI0100001184 | 120 | Rm |
| 57 | 41.03 | 50 mm dia PVC pipe | BI01010001010000000000000515BI0100001185 | 40 | Rm |
| 58 | 41.04 | 100 mm dia door tee | BI01010001010000000000000515BI0100001186 | 9 | No |
| 59 | 41.05 | 100 mm dia plain bend | BI01010001010000000000000515BI0100001187 | 12 | No |
| 60 | 41.06 | 100 mm dia collar | BI01010001010000000000000515BI0100001188 | 12 | No |
| 61 | 41.07 | 100 mm dia P/S trap | BI01010001010000000000000515BI0100001189 | 9 | No |
| 62 | 41.08 | 100mm dia door bend | BI01010001010000000000000515BI0100001190 | 6 | No |
| 63 | 41.09 | 75 mm dia door bend | BI01010001010000000000000515BI0100001191 | 6 | No |
| 64 | 41.1 | 75 mm dia plain bend | BI01010001010000000000000515BI0100001192 | 12 | No |
| 65 | 41.11 | 75 mm dia door tee | BI01010001010000000000000515BI0100001193 | 9 | No |
| 66 | 41.12 | 75 mm dia collar | BI01010001010000000000000515BI0100001194 | 12 | No |
| 67 | 41.13 | 75 mm dia cowels | BI01010001010000000000000515BI0100001195 | 6 | No |
| 68 | 42 | Providing and fixing of CP fixtures of Jaguar /Hindware /Cera / Essel/Parko or equivalent make including jointing testing and making good to surface as directed by the site Engineer including all carriages. | BI01010001010000000000000515BI0100001196 | ||
| 69 | 42.01 | Angle value 15 mm nominal bore | BI01010001010000000000000515BI0100001197 | 120 | No |
| 70 | 42.02 | Central hole basin mixer | BI01010001010000000000000515BI0100001198 | 16 | No |
| 71 | 42.03 | Wall mixer | BI01010001010000000000000515BI0100001199 | 14 | No |
| 72 | 42.04 | Sink mixer | BI01010001010000000000000515BI0100001200 | 6 | No |
| 73 | 42.05 | Short body Bib cock | BI01010001010000000000000515BI0100001201 | 48 | No |
| 74 | 42.06 | Grating with hinge type | BI01010001010000000000000515BI0100001202 | 24 | No |
| 75 | 42.07 | PVC connection 18'' -24'' long | BI01010001010000000000000515BI0100001203 | 120 | No |
| 76 | 42.08 | Sink/basin waste cuppling | BI01010001010000000000000515BI0100001204 | 5 | No |
| 77 | 42.09 | Health feucet | BI01010001010000000000000515BI0100001205 | 24 | No |
| 78 | 42.1 | Head shower | BI01010001010000000000000515BI0100001206 | 16 | No |
| 79 | 42.11 | Soap case | BI01010001010000000000000515BI0100001207 | 24 | No |
| 80 | 42.12 | Towel rod | BI01010001010000000000000515BI0100001208 | 24 | No |
| 81 | 42.13 | Looking mirror with brush stand | BI01010001010000000000000515BI0100001209 | 24 | No |
| 82 | 43 | Providing and fixing water closet squatting pan ( Indiantype W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. brackets, 32mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required white vitereous china W.C. pan of size 580 mm including carriages(Hindustan or equivalent)\n | BI01010001010000000000000515BI0100001210 | 18 | each |
| 83 | 44 | Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixing, complete including cutting and making good the walls and floors wherever requied W.C. pan with ISI marked white plastic solid seat and lid (Hindustan or equivalent)\n | BI01010001010000000000000515BI0100001211 | 6 | each |
| 84 | 45 | Providing and fixing wash basin with pedastal (Jaguar/Hindware/Cera/Essal or equivalent) and making good the walls wherever required white vitrous china washbasin size 630*450 including all carriages\n | BI01010001010000000000000515BI0100001230 | 16 | No |
| 85 | 46 | Providing and fixing of stainless steel sink 600*450 *250 mm of standard make with CI brakets ,CP brass chain with rubber plug ,40 mm CP brass waste complete including painting fittings and brakets,cutting and making good the walls wherever required as directed by site engineer including all carriages | BI01010001010000000000000515BI0100001231 | 6 | No |
| 86 | 47 | P/F of white vitrous china flat back or wall corner type lipid front urinal basin of 430 X 260 X350 mm and 340 X410X265 mm size respectively with automatic flushing cistern with CI/MS brackets standard size of GI flushpipe and CP Brass spreaders with brass unions and GI clamps complete (1 urinal basin with 5 ltr PVC white automatic flushing cistern of approved quality ) | BI01010001010000000000000515BI0100001232 | 8 | No |
AI Tender Summary
Tender Timeline
Nov 10, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 25, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender