Up-Gradation Of Staff Lounge Up-Gradation Of Staff Lounge To Conference Hall At Kashmere Gate Campus Of Dr B R Ambedkar University Delhi , , Delhi - 110006
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Dec 2020
0 days left
EMD
35000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambedkar University Delhi, Lothian Road, Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Up-Gradation Of Staff Lounge Up-Gradation Of Staff Lounge To Conference Hall At Kashmere Gate Campus Of Dr B R Ambedkar University Delhi , , Delhi - 110006
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Nov-2020 | Corrigendum No 1 | Date | 26-Nov-2020 |
| 2 | 26-Nov-2020 | Cotrrigendum No 2 | Date | 04-Dec-2020 |
BOQ
| Name of Work: Up-gradation of Staff lounge to conference hall at Kashmere Gate Campus of Dr. B. R. Ambedkar University Delhi, Delhi -110006. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | BI01010001010000000000000515BI0100001113 | 50 | Meter |
| 3 | 1.02 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 7.01 | Cum |
| 4 | 1.03 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001114 | 25.54 | Sqm |
| 5 | 1.04 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001114 | 1 | Each |
| 6 | 1.05 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. Metres | BI01010001010000000000000515BI0100001114 | 7 | Each |
| 7 | 1.06 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001114 | 26.92 | Sqm |
| 8 | 1.07 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) | BI01010001010000000000000515BI0100001114 | 7.64 | Sqm |
| 9 | 1.08 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001114 | 7.64 | Cum |
| 10 | 1.09 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | BI01010001010000000000000515BI0100001114 | 14.31 | Sqm |
| 11 | 1.1 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers etc | BI01010001010000000000000515BI0100001114 | 33.75 | Sqm |
| 12 | 1.11 | Reinforced cement concrete work in beams, columns, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001114 | 2.34 | Cum |
| 13 | 1.12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001114 | 2.39 | Cum |
| 14 | 1.13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | BI01010001010000000000000515BI0100001114 | 233.66 | Kg |
| 15 | 1.14 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001114 | 122.83 | Sqm |
| 16 | 1.15 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, fixing Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001114 | 7.7 | Sqm |
| 17 | 1.16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, fixing Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001114 | 85.71 | Sqm |
| 18 | 1.17 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001114 | 3.75 | Sqm |
| 19 | 1.18 | Providing and fixing 18 mm thick gang saw cut, mirror polished,\npremoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm | BI01010001010000000000000515BI0100001114 | 15.52 | Sqm |
| 20 | 1.19 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001114 | 10.08 | Sqm |
| 21 | 1.2 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | BI01010001010000000000000515BI0100001114 | 5 | Each |
| 22 | 1.21 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper | 5 | Each | |
| 23 | 1.22 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick | 68.45 | Sqm | |
| 24 | 1.23 | Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood | 0.3 | Cum | |
| 25 | 1.24 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to IS : 1328 BWR type | 48.29 | Sqm | |
| 26 | 1.25 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | 5 | Each | |
| 27 | 1.26 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm | 5 | Each | |
| 28 | 1.27 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | 5 | Each | |
| 29 | 1.28 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural rawings and the directions of Engineer-in-charge. (Glazing, paneling nd dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | 154.8 | Kg | |
| 30 | 1.29 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) | 10.88 | Sqm | |
| 31 | 1.3 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of\nEngineer-in-charge complete. Upto 5mm depth and 5 mm width | 41.6 | Meter | |
| 32 | 1.31 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazingand false ceiling including disposal of unserviceable surplus material andstacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | 95.21 | Sqm | |
| 33 | 1.32 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black), comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles | 89.46 | Sqm | |
| 34 | 1.33 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. | 58 | Sqm | |
| 35 | 1.34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 158.47 | Sqm | |
| 36 | 1.35 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. | 158.47 | Sqm | |
| 37 | 1.36 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats | 158.47 | Sqm | |
| 38 | 1.37 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | 24.38 | Sqm | |
| 39 | 1.38 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | 1 | Each | |
| 40 | 1.39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | 1 | Each | |
| 41 | 1.4 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia | 2 | Each | |
| 42 | 1.41 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 1 | Each | |
| 43 | 1.42 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore | 2 | Each | |
| 44 | 1.43 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.\nInternal work - Exposed on wall 15 mm dia nominal bore | 50 | Meter | |
| 45 | 1.44 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore | 10 | Meter | |
| 46 | 1.45 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete : 15 mm nominal bore | 2 | Each | |
| 47 | 1.46 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore | 2 | Each | |
| 48 | 1.47 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore \n | 1 | Each | |
| 49 | 1.48 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. | 6 | Each | |
| 50 | 1.49 | Providing and fixing C.P. brass bib cock of approved quality conforming\nto IS:8931 : 15 mm nominal bore | 2 | Each | |
| 51 | 1.5 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm | 1 | Each | |
| 52 | 1.51 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of RCC pipes including bed concrete as per standard\ndesign : 150 mm diameter RCC pipe | 50 | Meter | |
| 53 | 1.52 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe | 50 | Meter | |
| 54 | 1.53 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including pre cast RCC man hole cover and frame of MD circular cover of 500mm internal dia With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 3 | Each | |
| 55 | 1.54 | Extra for depth for manholes : Size 90x80 cm, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 2 | Meter | |
| 56 | 1.55 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 2 | Each | |
| 57 | 1.56 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter | 1 | Each | |
| 58 | 1.57 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | 2.5 | Cum | |
| 59 | 1.58 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | 20 | Sqm | |
| 60 | 1.59 | 16.84 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost). | 20 | Sqm | |
| 61 | 1.6 | Providing and fixing Ist quality rectified ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete | 36.96 | Sqm | |
| 62 | 1.61 | Carefully removing existing water proofing plaster of thickness up to 25mm from cement based waterproofing treatment on the terrace including dressing and stacking the rubish within 50 mtr lead. | 66.88 | Sqm | |
| 63 | 1.62 | Provding, making and fixing storage unit under the cooking plateform which consists of 19mm thick commericial Ply wood for vertical and horizontal partitions drows with outside laminate of approved colour and quality and ballaning laminate in inner side of approved quality including all accesories of kitchen cabinate, telescopic channel, handles etc and all materials, labours, wastage etc. complete as per direction of Engineer in charge. The elevation area (Length x Height) will be measured for payment. | 7.77 | Sqm | |
| 64 | 1.63 | Providing and fixing 110mm dia PVC Floor trap of approved quality includding fitting, fixing etc. complete as per direction. | 2 | Each | |
| 65 | 1.64 | Providing and fixing 600 mm CP brass towel rail of approved quality including all fittings and fixtures etc.complete. | 1 | Each | |
| 66 | 1.65 | Providing and fixing new C.P. brass health faucet of approved quality with one meter long flexible tube & wall hook complete in all respect. | 1 | Each | |
| 67 | 1.66 | Cutting and dismantelling MS square post up to size 75x75mm and stacking the dismantelled material within 50 mtr lead as per direction of Engineer in charge. | 2 | Each | |
| 68 | 1.67 | Taking away old dismantelled MS windows to contractor's own godown including loading, unloading etc as per direction of Engineer in charge. The quoted amount to be paid by contractor to be recovered from conractor as per actual quantity measured and as per quoted rate. | 37.44 | Sqm | |
| 69 | 1.68 | Taking away old dismantelled welded wire mesh to contractor's own godown including loading, unloading etc as per direction of Engineer in charge. The quoted amount to be paid by contractor to be recovered from conractor as per actual quantity measured and as per quoted rate. | 39.24 | Sqm | |
| 70 | 1.69 | Providing and fixing 6 mm toughened glass in pannel of slidding UPVC window with accessories etc. complete as per engineer in charge. | 11.52 | Sqm | |
| 71 | 1.7 | Providing and fixing unplasticized PVC SWR pipes conforming to IS 13592 Type B, including joining, fitting, fixing etc with all material & labours etc. complete as per direction of Engineer-in-Chrage. 110 mm diameter | 30 | Rmt | |
| 72 | 1.71 | Providing and fixing unplasticised - PVC SWR moulded fittings/ accessories for unplasticised Rigid PVC SWR pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°, 110 mm bend | 6 | Each | |
| 73 | 1.72 | Providing and fixing commercial plywood 4 mm thick of apprvoed make, for plain lining / cladding with necessary screws, including cutting and fixing etc complete as per direction. | 49.42 | Sqm | |
| 74 | 1.73 | Providing and laying water proofing cement plaster treatment over te roof consisting of following applications: (A) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (B) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel as per direction by Engineer-in-charge | 66.88 | Sqm | |
| 75 | 1.74 | Providing and fixing Window roller blind of approved quality and colour as per direction of Engineer-in-charge. | 9.68 | Sqm | |
| 76 | 2 | Electrical | |||
| 77 | 2.01 | Wiring for light Point/fan point/exhaust fan point/call bell point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/reccessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc. as required. Group C | BI01010001010000000000000515BI0100001114 | 26 | Point |
| 78 | 2.02 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire | BI01010001010000000000000515BI0100001114 | 160 | Meter |
| 79 | 2.03 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 4 sq.mm | 50 | Meter | |
| 80 | 2.04 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required 25 mm | 120 | Meter | |
| 81 | 2.05 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm | 40 | Meter | |
| 82 | 2.06 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch\n | 20 | Each | |
| 83 | 2.07 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet | 20 | Each | |
| 84 | 2.08 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required 3 Module (100mm X 75mm) | 10 | Each | |
| 85 | 2.09 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door | 1 | Each | |
| 86 | 2.1 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door | 1 | Each | |
| 87 | 2.11 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole | 34 | Each | |
| 88 | 2.12 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole | 1 | Each | |
| 89 | 2.13 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 A | 1 | Each | |
| 90 | 2.14 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \"C\" curve DP MCB complete with connections, testing and commissioning etc. as required. | 3 | Each | |
| 91 | 2.15 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)\n | 25 | Meter | |
| 92 | 2.16 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 35 sq. mm (32mm) | 2 | Each | |
| 93 | 2.17 | Supplying, Installation, Testing and Commisioning of recessed Mounted ultraslim LED fixture flat panel 2' x 2' made of fabricated CRCA sheet steel housing duly powder coated with high efficient LEDs & glare free opal diffuser IP 20, min 36 watt complete in false ceiling with driver (constant current and constant voltage) complete in every way as required. (Halonix CAT Ref. No. HLFPR22-02-36-CW-R or its equivalent) | 11 | Each | |
| 94 | 2.18 | Supplying, Installation, Testing and Commisioning of recessed mounted circular LED downlight fixture, min 15 watt in false ceiling made of PC with high efficient LEDs & Glare free opal diffuser, IP 20 complete with driver (constant current and constant voltage) complete in every way as required. (Halonix CAT Ref. No. HLDR-R08-15-CW-PC or its equivalent) | 22 | Each | |
| 95 | 2.19 | Supplying, Installation, testing and commissioning of wall fan of 400mm sweep oscilating type, having plastic blade and TOP (Thermal Overload Protector) complete with all acesseories such as front cage and connection as required. [Halonix CAT Ref. Krypton (High Speed Fan) or its equivalent]. | 6 | Each | |
| 96 | 2.2 | Supply of 1.1 KV grade XLPE aroumoured copper Conductor cable of following sizes 3.5 X 35 sq. mm | 25 | Meter | |
| 97 | 2.21 | Removing/ Relocation/ Installation of existing Inverter Type Hot and Cold split type air conditioning unit of 1.5 TR capacity and providing MS supporting stand, power cable of 3 core x 2.5 Sq. mm, refrigerant copper piping of 5/8” and 1/4” size with 9 mm thick insulation and 25mm PVC drain pipe upto 4 metres, gas charging etc. for the split AC unit complete in all respects.\n\n | 2 | Each | |
| 98 | 2.22 | Supplying installation testing and commissioning of exhaust fan of 260 MM Frame Size (White) 200mm sweep and 100 mm exhaust duct size in the existing false ceiling complete with all connections. | 1 | Each | |
| 99 | 2.23 | Supply, installation, testing & commissioning of Aluminium Exhaust flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications. | 5 | Meter | |
| 100 | 2.24 | Supplying and fixing following size/ modules, PVC box for modular switch and socket on surface etc. as required. | 10 | Each | |
| 101 | 2.25 | Supplying and Fixing PVC Casing & capping of 25 MM for circuit wiring. | 25 | Meter | |
| 102 | 2.26 | Dismantling of various sizes of steel conduit along with accessories fixed on surface and taking away the same to contractors own godown/dumpyard including loading, unloading etc. complete as per direction of Engineer in charge. | 75 | Meter |
AI Tender Summary
Tender Timeline
Nov 26, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 26, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Dec 04, 2020
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 04, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 04, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender