Extension Of Opd Pharmacy And Providing Glass Shield Blood Collection Area At Delhi State Cancer Institute ( East ) , Dilshad Garden Delhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2020
0 days left
EMD
3805
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi State Cancer Institute Dilshad Garden Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Extension Of Opd Pharmacy And Providing Glass Shield Blood Collection Area At Delhi State Cancer Institute ( East ) , Dilshad Garden Delhi
BOQ
| Name of Work: Extension of OPD Pharmacy and providing Glass shield blood collection area at Delhi state Cancer Institute (East) , Dilshad Garden Delhi. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Unnamed: 2 | Quantity | Units | |
| 1 | 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||
| 2 | 1.01 | Hot finished welded type tubes | 250 | kg | |
| 3 | 2 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) | |||
| 4 | 2.01 | :For fixed portion Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 110 | kg | |
| 5 | 2.02 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade accordingto IS: 1868, Minimum anodic coating of grade AC 15) | 20 | kg | |
| 6 | 3 | Providing and fixing 18 mm thick gang saw cut, mirror polished, pre moulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm | 3 | sqm | |
| 7 | 4 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness | 26 | sqm | |
| 8 | 5 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm | 12 | sqm | |
| 9 | 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. | |||
| 10 | 6.01 | For thickness of tiles 10 mm to 25 mm | 12 | sqm | |
| 11 | 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: | |||
| 12 | 7.01 | Cement mortar 1:4 (1 cement : 4 coarse sand) | 1 | cum | |
| 13 | 8 | Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : | |||
| 14 | 8.01 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | 1 | cum | |
| 15 | 9 | 15 mm cement plaster on rough side of single or half brick wall of mix: | |||
| 16 | 9.01 | 1:6 (1 cement: 6 coarse sand) | 20 | sqm | |
| 17 | 10 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved | 10 | cum | |
| 18 | 11 | Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | |||
| 19 | 11.01 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 11 | sqm | |
| 20 | 12 | Providing and Fixing 3mm thick Aluminum Composite Panel cladding of approved shade & pattern of INDO Bond ,Alstone or equivalent make (interior grade) sand witched between two skins of 0.5mm with thermoplastic core of mid low density polythene ACP cladding to be fixed on grid of Aluminum hollow tube frame by anchored screws and double tape of approved quality including sealing the joints by the silicon sealant (789-Doorcorning make) to make joints leak proof including the cost of cutting bending and fixing of ACP sheets ,scaffolding etc. complete as per direction of Engineer-in-charge.( Aluminum Hollow tube frame to be paid separately). | 25 | sqm |
AI Tender Summary
Tender Timeline
Nov 11, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 18, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender