Indian Army-IA has published Provision Of Operational Store. Submission Date for this Tender is 26-11-2020. Machine Tools Tenders in Akhnoor Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 17-Nov-2020 | Corrigendum | Technical Bid | 26-11-2020 |
Name of Work: Provision of Operational Stores: Job Nos : 6948 | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code | Quantity | Units | |
1 | 1.01 | Water Proof Plywood of size 2 x10mm thick , grade BWR , type BB ISI marked Make : Kitply / Centurey/ National | Item1 | 65 | Nos |
2 | 1.02 | Portable collapsible Wall basket, Galvanised welded mesh frame (2 cells per set) of size 1.22 x0.61x0.75 M (Length 4 feet,width 2 feet and height 2.5 feet). Basket mesh will be made of 4 mm dia hot dip galvanised low carbon steel wire confirming to BS 1052. 145 GMS Alu-Zinc coated prime, quality raw material conforming to BS/EN 10244-2. Wire tensile 540-770 N/mm2. 100% defect free.Basket frame mesh size is 76.5mm x 76.5mm. Mesh tensile 70% of wire tensile. Mesh frame edge will be spiral hinged through 20mm dia spiral made of 4 mm dia galvanised stretchable wire for joing to ensure easy folding and unfolding and 2' in length after folding. Tolerance panel + 1 mm in length, elongation approximately 5%. Weight of basket shall not be less than 12 kg/set. 8 Nos high tensile stiffing will be provided with each cage. The cage box have inner linning of non woven geotextile Khaki colour. The geotextile will be 3 mm thick 300 GSM in heavy duty non woven polypropylene. Make-HESCO/STAR/A1 Fence and equivalent meeting above specifications.\n\n\n | Item2 | 517 | Nos |
3 | 1.03 | Protective Wall Cage.Protective Wall Cage made of 8mm steel TOR (Make :- SAIL TMT/ JINDAL TMT/ TATA TMT) one coat of red oxide primer as per IS 2062-1999 with specification of weight Kg/M being not less than 0.395 Kg. The basket will be size as under :-\n (a) Length - 90 cm\n (b) Width - 60cm\n (c) Height - 75cm\n The mesh will be of a dimension 15cm x 15cm with all four corners of basket hinged with rings made of 10mm TOR, dia 1.25 inch with a total of 20 Rings (5 Nos each corner). Each wall cage to have 04 Nos of clamps. Clamps should consist of two Nos of MS plate of size (LxBxC) 100mm x 40mm x 4mm with 2 Nos of holes as mentioned in drawing, 2 Nos of 50mm x 8mm full threading nut and bolts as shown in the drawing be provided with the each clamp alongwith the washer with each nut bolt. One coat of red oxide primer to be applied to entire cage surface. | Item3 | 254 | Nos |
4 | 1.04 | Profile sheet having dimension of 8 feet x 3.5 feet x 0.63 mm and provided with high rib profile and pre coated with camouflage pattern (Brown and Green colour combination) on one of the side. High degree of zinc galvanization to prevent the sheet from early rusting due to rainwater and moisture in the atmosphere. The coating on the sheet to come with a warranty of one year. Make: Jindal/ TATA/ Sail | Item4 | 119 | Nos |
5 | 1.05 | Profile sheet having dimension of 10 feet x 3.5 feet x 0.63 mm and provided with high rib profile and pre coated with camouflage pattern (Brown and Green colour combination) on one of the side. High degree of zinc galvanization to prevent the sheet from early rusting due to rainwater and moisture in the atmosphere. The coating on the sheet to come with a warranty of one year. Make: Jindal/ TATA/ Sail | Item5 | 105 | Nos |
6 | 1.06 | MS Pole overall total length 18' Long80 mm nominal dia, (wall thickness 88.9mm outer dia nd 4.05 mm wall thickness) medium grade MS pipe 12' long and 50 mm nominal dia, 60.3mm outer dia medium grade 3.63mm wall thick MS pipe 6' long welded with base plate 6mm thick of size 300 x 300mm. Complete with one coat of red oxide primer and two coat of silver colour paint. | Item6 | 10 | Nos |
7 | 1.07 | GI Pipe 40mm dia medium 6 mtr long as per IS specification 1239 (Part-I) 1990 ISI marked. Make Jindal / Tata/ TSL ore equivalent | Item7 | 43 | Nos |
8 | 1.08 | Steel Roofing Trough (SRT). Steel Roofing Trough (SRT) ISI Marked 10' long made out of 2mm thick. @ 47.89/kg each with tolerance -5 to +5%, Hot rolled carbon steel sheet conforming to IS specification with 16 Nos 12MM dia long bolt, machine made (heavy duty) complete threaded with one nut and two washers of 30MM outer diameter and 3MM thick, per bolt, per SRT. The overall width of SRT shall be 613MM and height shall be 180MM. The SRT shall be applied with one shop coat of red oxide primer The Shape of SRT shall be regular and angle of bending shall be maintaned properly. The SRT not found properly in shape shall be rejected. Make : SAIL/ TATA/Jindal | Item8 | 95 | Nos |
9 | 1.09 | Steel Roofing Trough (SRT). Steel Roofing Trough (SRT) ISI Marked 8' long made out of 2mm thick. @ 47.89/kg each with tolerance -5 to +5%, Hot rolled carbon steel sheet conforming to IS specification with 16 Nos 12MM dia long bolt, machine made (heavy duty) complete threaded with one nut and two washers of 30MM outer diameter and 3MM thick, per bolt, per SRT. The overall width of SRT shall be 613MM and height shall be 180MM. The SRT shall be applied with one shop coat of red oxide primer The Shape of SRT shall be regular and angle of bending shall be maintaned properly. The SRT not found properly in shape shall be rejected. Make : SAIL/ TATA/Jindal | Item9 | 100 | Nos |
10 | 1.1 | Aggregate 40mm graded conforming to 383-1970 | Item10 | 9 | Cum |
11 | 1.11 | Cement concrete solid bricks of size 9''x4.5''x3”, Grade A quality conforming to IS 2185-2005. FOR - Akhnoor | Item11 | 45110 | Nos |
12 | 1.12 | Cement of 43 grade OPC conforming to IS 8112/1989 in sealed bags each weighting 50 Kgs. The date of manufacture of cement should not be more than one month prior to the date of delivery.Make : ACC/Ambuja /JK Laxmi. FOR - Akhnoor\n | Item12 | 1568 | Nos |
13 | 1.13 | Fine aggregate sand coarse as per IS 383- 1970. FOR - Akhnoor | Item13 | 29 | Cum |
14 | 1.14 | Aggregate 20mm graded conforming to 383-1970 | Item14 | 36 | Cum |
15 | 1.15 | Concrete Block of size 0.30 x 0.20 x 0.15 mtr casted in mix design M15 having minimum compration strength of 121 kg/cm2 conforming to IS 2185-2005 | Item15 | 10282 | Nos |
16 | 1.16 | Synthetic enamel Paint OG Colour Ist quality , Make : Berger/ Jenson & Nicholson | Item16 | 235 | Ltr |
17 | 1.17 | PBS Roll of size 20 mtr x 1.00 mtr of thickness 1.5mm Make: Standard ISI marked | Item17 | 65 | Roll |
18 | 1.18 | Rope Polypropylene 24mm | Item18 | 605 | RM |
19 | 1.19 | Rope Polypropylene 16mm | Item19 | 700 | RM |
20 | 1.2 | LDPE film as per IS 2508-1984 shall contain not less than 2.0% of carbon black of an average particle size 300 micron, 4 fit wide and sufficient adhesive of fixing. Make : SILPAULIN/SUPREME (colour OG/Black) and equivalent. | Item20 | 6190 | Sqm |
21 | 1.21 | PVC Cable 16 Sqmm 2 Core Aluminium Conductor Make : Havells/ Finolex/ Polycab confirming to IS 694-1990 | Item21 | 2800 | RM |
22 | 1.22 | PVC Cable 1.5 Sqmm 2 Core Copper ConductorMake : Havells/ Finolex/ Polycab confirming to IS 694-1990 | Item22 | 3690 | RM |
23 | 1.23 | PVC Cable 2.5 Sqmm 2 Core Copper Conductor Make : Havells/ Finolex/ Polycab confirming to IS 694-1990 | Item23 | 3960 | RM |
24 | 1.24 | MCB 10 Amp 2 Pole Make: Havells/ Legrand/ ABB/ Standard | Item24 | 80 | Nos |
25 | 1.25 | PVC Cable 16 Sqmm 4 Core Copper ConductorMake : Havells/ Finolex/ Polycab confirming to IS 694-1990 | Item25 | 1154 | RM |
26 | 1.26 | PVC Cable 10 Sqmm 2 Core Copper ConductorMake : Havells/ Finolex/ Polycab confirming to IS 694-1990 | Item26 | 640 | RM |
27 | 1.27 | LED Street Light 45 W, versatile pressure dia- cast aluminium epoxy powder coated luminaire with high power LEDs (life should not be less than 50000 burning hours) as light source delivers higher lumens while consuming less power and provide exlent illumination, with symmetrical spread beam angle , IP 65, in built electronic driver Water proof intigrated out door type. Make: Havells/ Green star/ Philips. | Item27 | 74 | Nos |
28 | 1.28 | On/ Off Switch | Item28 | 25 | Nos |
29 | 1.29 | LED Bulb 15 W,Make: Philips/ Havells/ Bajaj | Item29 | 248 | Nos |
30 | 1.3 | GI Binding wire annealed not less than 0.9mm dia | Item30 | 139 | Kgs |
31 | 1.31 | HDPE sand bags (UV proofed) barrel type double stitched at one end std quality with inside lamination size 840x360mm with suitable tying cord as per IS 14252-1995 and weight of each bag not less than 85 gm colour Khaki. | Item31 | 10636 | Nos |
32 | 1.32 | Synthetic enamel Paint Black Colour Ist quality , Make : Berger/ Jenson & Nicholson | Item32 | 386 | Ltr |
33 | 1.33 | Synthetic enamel Paint Green Colour Ist quality Make : Berger/ Jenson & Nicholson | Item33 | 436 | Ltr |
34 | 1.34 | Synthetic enamel Paint Yellow Colour Ist quality Make : Berger/ Jenson & Nicholson | Item34 | 170 | Ltr |
35 | 1.35 | Synthetic enamel Paint White Colour Ist quality Make : Berger/ Jenson & Nicholson | Item35 | 385 | Ltr |
36 | 1.36 | White Sealant ( Safeda) | Item36 | 30 | Nos |
37 | 1.37 | Nails 3" | Item37 | 59 | Kgs |
38 | 1.38 | Thread for GI Pipe | Item38 | 14 | Pkt |
39 | 1.39 | Cleaning of septic tank ( 1000 ltr Capacity) | Item39 | 50 | Nos |
40 | 1.4 | LED Bulb 9 W Make: Philips/ Havells/ Bajaj | Item40 | 591 | Nos |
41 | 1.41 | Nails 2" | Item41 | 55 | Kgs |
42 | 1.42 | Pipe wrench 250mm long heavy duty Make: Everest/ Taparia or equivalent | Item42 | 3 | Nos |
43 | 1.43 | Wall Putty Make : Birla white / JK | Item43 | 190 | Kgs |
44 | 1.44 | Paint Brush 40mm dia Make - Horse/ Lucky/ Hippo | Item44 | 84 | Nos |
45 | 1.45 | LED Bulb 10 W Make: Philips/ Havells/ Bajaj | Item45 | 580 | Nos |
46 | 1.46 | Tape measuring with 30 mtr Make - Freeman & equivalent | Item46 | 14 | Nos |
47 | 1.47 | LED Tube light cap 16/18 W complete set 4' Long with mounting frame and tube including inbuilt electronic driver 240 Volt AC Make: Syska/ Surya/ Philips | Item47 | 85 | Nos |
48 | 1.48 | Tube Light Chock Make - Bajaj/ Havel/ Syska | Item48 | 40 | Nos |
49 | 1.49 | Die set ratchet type heavy duty of size 25 mm. | Item49 | 1 | Nos |
50 | 1.5 | Pipe Wrench 300mm long heavy duty Make: Everest/ Taparia or equivalent | Item50 | 4 | Nos |
51 | 1.51 | PVC Cable 6 Sqmm 2 core coppr conductor Make : Havells/ Finolex/ Polycab confirming to IS 694-1990 | Item51 | 163 | Mtr |
52 | 1.52 | PVC Cable 4 Sqmm 2 core copper conductor Make : Havells/ Finolex/ Polycab confirming to IS 694-1990 | Item52 | 152 | Mtr |
53 | 1.53 | MCB 2 pole 32 Amps Make - Havells/ Legrand/ L&T | Item53 | 42 | Nos |
54 | 1.54 | MCB 16 Amps Make - Havells/ Legrand/ L&T | Item54 | 7 | Nos |
55 | 1.55 | Oil bound distemper Make : Asian/ Nerolac/ Berger | Item55 | 20 | Kgs |
56 | 1.56 | Synthetic enamel Paint Brown Colour Make : Berger/ Jenson & Nicholson | Item56 | 55 | Ltr |
57 | 1.57 | Red Oxide Primer Make : Asian/ Nerolac/ Berger | Item57 | 205 | Ltr |
58 | 1.58 | Switch 15 Amps single pole one way , 240 Volt , AC Make:Anchor/ Havells/ Standard | Item58 | 35 | Nos |
59 | 1.59 | Switch socket combination 15 Amps 5 pin flush type ISI marked Make: Anchor/ Kinjal/ Havells | Item59 | 139 | Nos |
60 | 1.6 | Switch socket piano type 5 Amp , ISI marked Make: Anchor/ Kinjal/ Havells | Item60 | 160 | Nos |
61 | 1.61 | White Cement Make: Asian/ Nerolac/ Berger | Item61 | 73 | Kgs |
62 | 1.62 | Vitrified colour floor tiles of size 600mm x 600mmx 10mm thick Make3: Kajaria/ Somany/ Johnson | Item62 | 135 | Sqft |
63 | 1.63 | Bib Cock 15mm Brass Make : Prayag/ Sieco/ Parko | Item63 | 28 | Nos |
64 | 1.64 | GI pipe 50mm dia medium 6 mtr long as per IS specification 1239 (Part-I) 1990 ISI marked. Make Jindal / Tata/ Sail | Item64 | 7 | Nos |
65 | 1.65 | GI pipe 15mm dia medium 6 mtr long as per IS specification 1239 (Part-I) 1990 ISI marked. Make Jindal / Tata/ Sail | Item65 | 41 | Nos |
66 | 1.66 | GI Tap 15mm Make : Prayag/ Sieco/ Parko | Item66 | 8 | Nos |
67 | 1.67 | Changeover 32 Amps Make - Havells/ Legrand/ Indonasia | Item67 | 1 | Nos |
68 | 1.68 | Punched Tape Concertina Coil (including spike handle) with 50 turns and dia 1050 mm having a 2.6 mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electrogalvanised to provide protection against outdoor exposure. The punched tape is machenically crimped over the cover wire and then formed in to a coil at various parts of the periphery of the coil steel clips connect the individual turns of the coil to each other so that it opens up like an accordion. The width of barbed as 9mm and spacing of clips 23.5 mm to 24.5 mm C/C The weight of each coil will be 15.2 +5% Kgs without packing material and coil length 12 mtr when opened up. Each coil wound with bituminized hession cloth for providing protection coating as per specification No IND/ENG/PROV/1245 is for raw material and drawing IMGA 0112/B (sheet 1 of2) , IMPD-1821/B and IMPD-1822/B. | Item68 | 105 | Nos |
69 | 1.69 | Punched Tape Baby Coil (including spike and handle) with 50 turns and dia 600mm, having a 2.6mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electro galvanized to provide protection against out door exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil steel clips connect the individual turns of the coil to each other so that it opens up like an accordion. The weight of each coil will be 9.5+5% Kgs without packing material and coil length 7.5 mtr when opened up. Each coil wound with bituminized Hession cloth for providing protective coating as per specification No IND/ENG/PROV/1245 is for raw material and drawings IMGA 0112/B (sheet 1 of 2), IMBA-0112/C (Sheet 2 of 2), IMPD-1817/B, IMPD-1820, IMPD-1821/B and IMPD-1822/B. | Item69 | 10 | Nos |
70 | 1.7 | W8/5660-000008 spool plastic with punched tape 50 mtr as per specification No CQAE/5660/1515/2001 & Drg No IMGA-0113/A, IMSA-0289/A, IMPD-1818/A, IMPD-1819 and IMPD-1820 and galvanized should be as per IS-209 | Item70 | 50 | Nos |
71 | 1.71 | Defoliant (Round Up) | Item71 | 250 | Ltr |
72 | 1.72 | LAIP 50 x 50 x 6 mm 1800mm long Make- TATA/ SAIL/ JINDAL (ISI Marked) minimum weight 8.1 Kg | Item72 | 210 | Nos |
73 | 1.73 | Profile sheet having dimension of 12 feet x 3.5 feet x 0.63 mm and provided with high rib profile and pre coated with camouflage pattern (Brown and Green colour combination) on one of the side. High degree of zinc galvanization to prevent the sheet from early rusting due to rainwater and moisture in the atmosphere. The coating on the sheet to come with a warranty of one year. Make: Jindal/ TATA/ Sail | Item73 | 13 | Nos |
74 | Total in Figures |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail