Periodical Services And Repair To Leakage/ Seepage For Jcos/Or Otm Accn In South West Zone At Rms
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2020
0 days left
EMD
57200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rangapahar → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Services And Repair To Leakage / Seepage For Jcos / Or Otm Accn In South West Zone At Rms
BOQ
| Name of Work: PERIODICAL SERVICES AND REPAIR TO LEAKAGE/ SEEPAGE FOR JCOs/OR OTM ACCN IN SOUTH WEST ZONE AT RMS. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified | 3000 | Sqm | |
| 2 | 2 | M&L 5 mm thick ceiling plaster in CM (1:3) on fair faces of concrete surfaces. | 250 | Sqm | |
| 3 | 3 | M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement . WPC will be measured and paid separately. | 1500 | Sqm | |
| 4 | 4 | M&L rendering 10mm in CM 1:4 mixed with water proofing compound @ 3% by wt of cement on balcony, facia, roof projection and chajja etc. The work will be carried out upto tripple storey building the rate of scafolding is included for this item also. WPC will be measured and paid separately. | 250 | Sqm | |
| 5 | 5 | M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement. | 1000 | Sqm | |
| 6 | 6 | Supply only integral water proofing compound ( ISI marked ) | 250 | Kg | |
| 7 | 7 | M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces. | 300 | Sqm | |
| 8 | 8 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces. | 250 | Sqm | |
| 9 | 9 | complete removal of exisitng treatment and applying two coats of white wash on walls, fins, facia. Chajja etc , complete all as specified and as directed. | 1500 | Sqm | |
| 10 | 10 | M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing and applying one coat of white wash on wall complete all as specified & directed . White washing shall be carried out using DDL.The work will be carried out upto tripple storey building the rate of scafolding is included for this item also. | 18000 | Sqm | |
| 11 | 11 | All as per item No 10 above but on ceiling | 500 | Sqm | |
| 12 | 12 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of approved tint all as specified . | 700 | Sqm | |
| 13 | 13 | M&L preparation old plastered surfaces of wall and applying one coat oil bound distemper on walls complete all as specified & directed. | 7000 | Sqm | |
| 14 | 14 | M&L for preparation of old plastered surface & applying two coats of oil bound distemper (OBD) over a coat of 2mm thick wall putty complete all as specified and directed by Engineer-in-charge. | 2000 | Sqm | |
| 15 | 15 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge. The work will be carried out upto tripple storey building the rate of scafolding is included for this item also. | 1750 | Sqm | |
| 16 | 16 | M&L for complete removal of existing treatment of plastered surface of wall and apply two coats of cement base paint.The work will be carried out upto tripple storey building the rate of scafolding is included for this item also. | 5000 | Sqm | |
| 17 | 17 | M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed.The work will be carried out upto tripple storey building the rate of scafolding is included for this item also. | 2000 | Sqm | |
| 18 | 18 | M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed. | 1500 | Sqm | |
| 19 | 19 | M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed. | 2000 | Sqm | |
| 20 | 20 | M&L for preparation of old painted steel surfaces not exc. 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed. | 200 | 10RM | |
| 21 | 21 | M&L for preparation of old painted surfaces of wood not exc.10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed. | 200 | 10RM | |
| 22 | 22 | Preparation of old decorated plastered surface of any description and applying one coat of plastic emulsion paint complete all as specified and as directed. | 400 | Sqm | |
| 23 | 23 | M&L for preparation of old rusted steel surfaces of CGI/PGI sheet as in roof , cleaned off all rust by brushing with wire brushes and applying two coats of anticorrosive roof paint over priming coat of red oxide primer, over 10 cm in width or grith, complete all as specified and as directed. | 100 | Sqm | |
| 24 | 24 | Taking down AC/Salt glazed ware pipes and fittings upto 110mm. | 40 | RM | |
| 25 | 25 | S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall | 20 | RM | |
| 26 | 26 | S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall | 20 | RM | |
| 27 | 27 | S&F of 110mm dia PVC (SWR) bends | 10 | Each | |
| 28 | 28 | S&F 75mm PVC(SWR) bends any radius with access door. | 10 | Each | |
| 29 | 29 | S&F of 75dia PVC (SWR) Vent cowl | 5 | Each | |
| 30 | 30 | S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof | 10 | Each | |
| 31 | 31 | S&F in repairs for 100mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof | 10 | Each | |
| 32 | 32 | M&L Pressure grouting of honey combed concrete with cement slurry by adding CEBEX 100 or equivalent @ 255 gms/50 Kg of cement.\n | 50 | Per Nozzle | |
| 33 | 33 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground level | 4.2 | Cum | |
| 34 | 34 | M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. | 4.2 | Cum | |
| 35 | 35 | M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate mixed with WPC (in proportion as per manufacturer's instruction) as in bedding in sunken portion of slab complete all as specified and directed. | 60 | Sqm | |
| 36 | 36 | M&L for rendering 10mm thick plaster in cement mortar (1:3) mixed with water proofing admixture (in proportion as per manufacturers instructiion) as in sunken portion, finished the surfaces even and smooth without using extra cement complete all as specified and directed. | 60 | Sqm | |
| 37 | 37 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. | 140 | Sqm | |
| 38 | 38 | S & F Pre-painted galvalume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. | 45 | Sqm | |
| 39 | 39 | S & F Pre-painted galvalume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. | 5 | Sqm | |
| 40 | 40 | M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L or J type or cranked hooks. | 45 | Sqm | |
| 41 | 41 | M&L Asbestos cement one piece plain angular ridge 6mm thick | 5 | RM | |
| 42 | 42 | M&L 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. | 45 | Sqm | |
| 43 | 43 | M&L 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 | 5 | Sqm | |
| 44 | 44 | Dismantaling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbbish off the premises. | 300 | Sqm | |
| 45 | 45 | M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 all as directed . | 150 | Sqm | |
| 46 | 46 | M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 all as directed . | 100 | Sqm | |
| 47 | 47 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. | 50 | Sq.m | |
| 48 | 48 | Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets | 100 | Sqm | |
| 49 | 49 | Dismantling boarding any description fixed in any position with nails | 10 | Sqm | |
| 50 | 50 | S&F 4 mm thick 600x600mm size HSPC(High Pressure Steam Cured) prepainted, textured designer board , E Board classic to be fixed on GI grid/section size 600x600mm with main runner 38x24x0.9 mm thick,cross tee 28.6x24x0.9 and wall angle 19x19x0.9mm duly suspended with hanger any size ,comprising of 4 mm dia MS wire J type hook, nuts and bolt holding down clips complete all as specified and directed | 100 | Sqm | |
| 51 | 51 | S&F asbestos cement plain building boards, 4mm thick, fixed to timber framework with screws ,complete all as specified and as directed. | 10 | Sqm | |
| 52 | 52 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing. | 54 | RM | |
| 53 | 53 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing. | 19 | RM | |
| 54 | 54 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing. | 4 | RM | |
| 55 | 55 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing. | 5 | RM | |
| 56 | 56 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore. | 50 | RM | |
| 57 | 57 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore. | 14 | RM | |
| 58 | 58 | M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth. | 10 | RM | |
| 59 | 59 | S&F in repairs for 15mm dia of pipe Angle valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed . | 10 | Each | |
| 60 | 60 | S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms). | 6 | Each | |
| 61 | 61 | S&F in repair 15 mm dia bib tap long body cast copper alloy(fency type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed. | 10 | Each | |
| 62 | 62 | S&F in repairs concealed stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed. | 10 | Each |
AI Tender Summary
Tender Timeline
Nov 06, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 20, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender