Special Repair To Building Nos P03 P85 Of Smqs And Mes Quaters At Af Stn Suryalanka
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Dec 2020
0 days left
EMD
57200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Suryalanka → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Building Nos P03 P85 Of Smqs And Mes Quaters At Af Stn Suryalanka
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Nov-2020 | Revision of BOQ | BOQ | 28-Nov-2020 |
| 2 | 28-Nov-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Dec-2020 |
| 3 | 07-Dec-2020 | Due Date Extended | Admin Corrigendum Date Extend | 09-Dec-2020 |
BOQ
| Name of Work: SPECIAL REPAIR TO BUILDING NOS P-03 & P-85 OF SMQS AND MES QUATERS AT AF STN SURYALANKA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SCHEDULE 'A' | |||
| 2 | 2 | Taking down cement or cement lime plaster, any description, on brick walls including racking out joints hacking for key scrubbing down with water etc. all as specified and directed. | 778 | Sqm | |
| 3 | 3 | Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed. | 1 | Cum | |
| 4 | 4 | M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling surface finished even and smooth with out using extra cement all as specified and directed. | 176 | Sqm | |
| 5 | 5 | M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement all as specified and directed. | 224 | Sqm | |
| 6 | 6 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in two layers, first layer 10 mm thick in CM 1:6 and second layer 5 mm thick in CM 1:4 finishing fair and even mixed with WPC as per manufacturer's instructions all as specified and directed. (Note : Supply of water proofing compound shall be measured and paid seperately). | 378 | Sqm | |
| 7 | 7 | Supply only of integral water proofing compound of approved make all as specified and directed. | 28 | Kg | |
| 8 | 8 | Demolition of cement concrete (reinforced) reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for and removing from site all as specified and directed. | 3 | cum | |
| 9 | 9 | M&L for Brickwork with sub-class `B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed. | 7 | Sqm | |
| 10 | 10 | M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slabs, shelves, platforms, similar articles with plain faces set in cement mortar all as specified and directed. | 3 | Cum | |
| 11 | 11 | M&L for Mild Steel TMT bars 8 mm dia cut to length bend to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed. | 163 | KG | |
| 12 | 12 | Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, below or above ground level as directed. | 15 | Cum | |
| 13 | 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and aprons removing serviceable tiles to store and rubbish off the premises all as specified and directed. | 272 | Sqm | |
| 14 | 14 | M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in screed bed below floor tiles etc. all as specified and directed. | 228 | Sqm | |
| 15 | 15 | M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed in cement mortar 1:6 all as specified and directed. | 55 | Sqm | |
| 16 | 16 | M&L for joint free non Skid ceramic coloured tiles (matt finish) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15 mm thick screed in cement mortar 1:6 all as specified and directed. | 173 | Sqm | |
| 17 | 17 | M&L for 100 mm high skirting with joint free non Skid ceramic coloured tiles (matt finish) 7 to 8 mm thick high area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 10 mm thick backing coat in cement mortar 1:4 all as specified and directed. | 28 | Sqm | |
| 18 | 18 | M&L for Glazed ceramic coloured tiles 300 x 200 size 7 mm thick in vertical surfaces as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick backing coat in cement mortar 1:4 all as specified and directed. | 209 | Sqm | |
| 19 | 19 | M&L for 18-20 mm thick Granite stone slabs of any type machine cut bedded and jointed with grey cement slurry and pointed with white cement with admiture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15 mm thick screed in cement mortar 1:6 all as specified and directed. | 8 | Sqm | |
| 20 | 20 | M&L for 18-20 mm thick Granite stone slabs of any type machine cut fixed as in shelves with cement slurry all as specified and directed. | 3 | Sqm | |
| 21 | 21 | M&L for 20-25 mm thick Kota stone slabs in floorings laid and jointed with grey cement slurry mixed with pigment to match the shade of the salb including rubbing and polishing and laid over and including 20 mm thick cement screed bed in cement mortar 1:6, complete all as specified and directed. | 32 | Sqm | |
| 22 | 22 | M&L for 20-25 mm thick Kota stone slab in risers of steps, skirting, dado and pillar laid over and including 10 mm thick rendering in cement mortar 1:4, and jointed grey cement slurry mixed with pigment to match the shade of the salb including rubbing and polishing complete all as specified and directed. | 5 | Sqm | |
| 23 | 23 | M&L for rounding to the edges of stone slabs one edge as in steps, cooking platform, and other similar situations all as specified and directed. | 51 | RM | |
| 24 | 24 | M&L for 75 mm thick plain cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate as in plinth protection, paving etc. surface finished even and smooth without using extra cement all as specified and directed. | 62 | Sqm | |
| 25 | 25 | Taking down chowkats or frames (without taking off shutters from frame) not exceeding 1.5 sqm each including making good disturbed portions with PCC 1:2:4 type B-0 or in cement mortar 1:4 after removal of frames all as specified and directed. | 63 | Each | |
| 26 | 26 | Taking down chowkats or frames (without taking off shutters from frame) exceeding 1.5 sqm but not exceeding 4 Sqm each including making good disturbed portions with PCC 1:2:4 type B-0 or in cement mortar 1:4 after removal of frames all as specified and directed. | 42 | Each | |
| 27 | 27 | S&F of Pressed steel frames 125 x 60mm size for doors with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed. | 36 | RM | |
| 28 | 28 | S&F of Pressed steel frames 105 x 60mm size for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed. | 104 | RM | |
| 29 | 29 | S&F of Pressed steel frames 75 x 50 mm size for cup boards with one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed. | 70 | RM | |
| 30 | 30 | M&L for Plain cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate for filling of hollow portions of door frames etc., all as specified and directed. | 1 | Cum | |
| 31 | 31 | S&F of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. | 35 | Sqm | |
| 32 | 32 | S&F of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. | 25 | Sqm | |
| 33 | 33 | S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze etc. (with out sash bars), edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass, wire gauge etc. ; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats all as specified and directed. | 22 | Sqm | |
| 34 | 34 | M&L for 18 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white laminations, including teakwood lipping on all edges, fixed with screws to timber frame work or to walls with booden cleats etc fixed in repairs in shelves of cup boards etc., all as specified and directed. | 22 | Sqm | |
| 35 | 35 | M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed by Engineer-in-charge. | 449 | Kg | |
| 36 | 36 | S&F of powder coated anodised aluminium window and ventilator glazed shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m (standard aluminium section of DG-2496 of sizes 39.4 x 17.7 mm and 1.2 mm thick (min) including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2Nos), suitable handle (1Nos) for each shutter complete all as specified and directed by Engr-in-charge. | 94 | Sqm | |
| 37 | 37 | S & F of Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beeds all as specified and directed. | 46 | Sqm | |
| 38 | 38 | S&F of 4 mm thick Sheet Glass, ordinary quality and glazing with aluminium beads all as specified and directed. | 38 | Sqm | |
| 39 | 39 | S&F of 4 mm thick Figured glass, pin hea type and glazing with aluminium beads all as specified and directed. | 4 | Sqm | |
| 40 | 40 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed. | 84 | Each | |
| 41 | 41 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed. | 28 | Each | |
| 42 | 42 | S&F of 100 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed. | 56 | Each | |
| 43 | 43 | S&F of 150 mm long Aluminium alloy handles cast type anodised all as specified and directed. | 70 | Each | |
| 44 | 44 | S&F of 100 mm long Aluminium alloy handles cast type anodised all as specified and directed. | 70 | Each | |
| 45 | 45 | S&F 75 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-22 all as specified and directed. | 42 | Each | |
| 46 | 46 | S&F 75 mm size Hasp and Staple aluminium anodised safety type with pin hinge including bolt to hinge plate and fixed with screws fixed in repairs all as specified and directed. | 7 | Each | |
| 47 | 47 | S&F of 300 mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed. | 7 | Each | |
| 48 | 48 | S&F of Mild steel 300 mm ,ordinary rat & tail rod pattern springs including roller and roller plate complete all as specified and directed. | 7 | Each | |
| 49 | 49 | S&F of curtain rods (drapery rods) not less than 25 mm dia, anodised aluminium alloy with fixing brackets fixed in repairs all as specified and directed. | 74 | RM | |
| 50 | 50 | S&F of factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as all as specified and directed. | 69 | RM | |
| 51 | 51 | S&F of Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourr PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement all as specified and directed. | 20 | Sqm | |
| 52 | 52 | S&F of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., fixed in repairs complete including making good to floor all as specified and directed by Engrineer-in-Charge. | 7 | Each | |
| 53 | 53 | S&F of 10 lit capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed in repairs, all as specified and directed by Engineer-in-Charge. | 7 | Each | |
| 54 | 54 | S&F in repairs Vitreous China wash basin, white, flat back, of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, 32 mm dia chromium plated waste fitting and 40 mm bore PVC waste pipe all as specified and directed by Engineer-in-Charge. | 7 | Each | |
| 55 | 55 | S&F of CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, all as specified and directed. | 7 | Each | |
| 56 | 56 | S&F in repairs of 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. | 7 | Each | |
| 57 | 57 | S&F in repairs of Stop valves 15 mm bore, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, all as specified and directed. | 21 | Each | |
| 58 | 58 | S&F in repairs 15 mm bore Bib taps, chromium plated, cast copper alloy, screwed down, screwed for iron pipe, all as specified and directed. | 21 | Each | |
| 59 | 59 | S&F of PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed. | 14 | Each | |
| 60 | 60 | S&F of Towel rail 600 mm long of PTMT minimum weight 190 gms, fixed with and including chromium plated brass screws and wooden / plastic cleats. | 7 | Each | |
| 61 | 61 | S&F of 20 mm outer dia 3 layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., including taking up or down steel tubing and connections all as specified and directed. | 32 | RM | |
| 62 | 62 | S&F of 25 mm outer dia 3 layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., including taking up or down steel tubing and connections all as specified and directed. | 35 | RM | |
| 63 | 63 | S&F in repairs of Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including beding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pope overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm all as specified and directed. | 7 | Each | |
| 64 | 64 | S&F Stainless steel plate rack 1 mm thick of size 760x930x200 mm of standard makes all as specified and directed. | 7 | Each | |
| 65 | 65 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs all as specified and directed. | 7 | Each | |
| 66 | 66 | M&L for Preparing new or previously un treated surfases of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed. | 208 | Sqm | |
| 67 | 67 | M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. | 51 | Sqm | |
| 68 | 68 | M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior weather coat paint over a coat of primer all as specified and directed. | 378 | Sqm | |
| 69 | 69 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash all as specified and directed. | 176 | Sqm | |
| 70 | 70 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash all as specified and directed. | 158 | Sqm | |
| 71 | 71 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer all as specified and directed. | 66 | Sqm | |
| 72 | 72 | M&L for preparation of old painted surfaces of walls and applying one coat of oil bound distemper all as specified and directed. | 2115 | Sqm | |
| 73 | 73 | S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors as in soil, waste and pipes including dismantling of old pipes all as specified. | 24 | RM | |
| 74 | 74 | S&F of 110 mm bore PVC (SWR) bends any radius provided with access door, fixed in repairs all as specified. | 8 | Each | |
| 75 | 75 | S&F of 110 mm bore PVC (SWR) junction, single (Single T) equal or unequal provided with access door, fixed in repairs all as specified. | 8 | Each | |
| 76 | 76 | S&F of 110 mm bore PVC (SWR) Vent cowl fixed in repairs all as specified. | 8 | Each | |
| 77 | 77 | S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors as in soil, waste and pipes including dismantling of old pipes all as specified. | 12 | RM | |
| 78 | 78 | S&F of 75 mm bore PVC (SWR) bends any radius provided with access door, fixed in repairs all as specified. | 8 | Each | |
| 79 | 79 | M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement , fixed in repairs all as specified. | 12 | Each | |
| 80 | 80 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor, FRLS PVC insulated unsheathed cable 1100 volts grade fixed inside the wall and including PVC conduit, fitting and accessories, joints boxes including one 1.5 sqmm copper FRLS PVC insulated unsheathed earth continuty conductor connected in the common earth complete all as specfied for One light point controlled by one switch | 88 | Point | |
| 81 | 81 | All as per item No 80 above but for One fan point controlled by one switch all as spd and as directed. | 40 | Point | |
| 82 | 82 | All as per item No 80 above but for One 3 pin socket outlet 5 amps on same board controlled by one switch with 1.5 sqmm size cable all as spd and as directed. | 24 | Point | |
| 83 | 83 | All as per item No 80 above but for One 3 pin socket outlet 5 amps controlled by one switch on independent board with 1.5 sqmm size cable all as spd and as directed.. | 48 | Point | |
| 84 | 84 | All as per item No 80 above but for One 3 pin socket outlet, 15 amps, controlled by one switch on independent board with 2.5 sqmm size cable all as spd and as directed.. | 24 | Point | |
| 85 | 85 | All as per item No 80 above but for One light point controlled by two way switch all as spd and as directed. | 2 | Point | |
| 86 | 86 | All as per item No 80 above but for One bell/buzzer point controlled by one push button all as spd and as directed. | 8 | Point | |
| 87 | 87 | S&F Switch Piano type 5 Amp 01 Way complete all as specified and as directed. | 152 | Each | |
| 88 | 88 | S&F Switch Piano type 5 Amp 02 Way complete all as specified and as directed. | 4 | Each | |
| 89 | 89 | S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type complete all as specified and as directed. | 24 | Each | |
| 90 | 90 | S&F Switch socket combination 2 in 1, 5 pin, 5 Amp flush type complete all as specified and as directed. | 48 | Each | |
| 91 | 91 | S&F Switch socket combination 5 in 1, 5 pin, 15 Amp flush type complete all as specified and as directed. | 24 | Each | |
| 92 | 92 | S&F Bell push, flush type, 5 amp complete all as specified and as directed. | 8 | Each | |
| 93 | 93 | S&F Bell, AC, 230 volts, single pole complete all as specified and as directed. | 8 | Each | |
| 94 | 94 | S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed. | 40 | Each | |
| 95 | 95 | S & F stepped type electronic fan regulator flush type complete all as specified and as directed. | 24 | Each | |
| 96 | 96 | S&F Ceiling rose, 3 plate /PVC/ polycarbonate, isolated body complete all as specified and as directed. | 88 | Each | |
| 97 | 97 | S&F wall mounted LED CRCA batten complete with retrofit T8 Polycarbonate tube of 20 Watt 4 feet, connecting up with twin core twisted flexible copper conductor cable with suitable size to ceiling rose complete all as specified and as directed. | 44 | Each | |
| 98 | 98 | S&F LED retrofit lamp 7 Watt B-22 holder base with polycarbonate diffuser and aluminium heat sink complete all as specified and as directed. | 40 | Each | |
| 99 | 99 | S&F in replacement of exisiting street light with LED Street light fitting Powder coated pressure die cast aluminium SMD LED with integrated lens of 25 Watt along with GI pipe of 1.5 mtr 25 mm dia light grade and three core flexible copper connecting cable from light fitting to ceiling rose complete all as specified and as directed. | 4 | Each | |
| 100 | 100 | Supply and fixing SPN DB Double door 8 way with tray for provision of MCBs, and Dolly for earth and netural complete all as specified and as directed | 10 | Each | |
| 101 | 101 | S&F MCB Four Pole 40 Amps, 10 kA, C Curve complete all as specified and as directed. | 2 | Each | |
| 102 | 102 | S&F MCB Two Pole 6-32 Amps, 10 kA, C Curve complete all as specified and as directed. | 8 | Each | |
| 103 | 103 | S&F MCB Single Pole 6-32 Amps, 10 kA, C Curve complete all as specified and as directed. | 48 | Each | |
| 104 | 104 | Supply and fixing submain wiring with two run of FRLS single core cable PVC insulated unsheathed cable 1100 volts grade 6 Sqmm copper multistranded conductor including and drawing into PVC conduit, fixed on wall, ceiling including one run of 6 sqmm FRLS PVC insulated unsheathed multistranded for earth wire connected to earth complete. Note :- Three run of 6 sqmm calbe and onerun of PVC Conduit shall be measured as one Rm | 160 | Rm | |
| 105 | 105 | Taking down carefully ceiling fan complete of any size and capacity, Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and refixing the same complete all as directed and as specfied. | 24 | Each | |
| 106 | 106 | Taking down carefully exhaust fan with louver complete of any size and capacity, Painting of fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and refixing the same fan with new louver complete all as directed and as specfied. | 16 | Each | |
| 107 | 107 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bulbs etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. | 234 | Point | |
| 108 | 108 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point including testing on completion and complete all as specified and as directed by Engr-in-Charge. | 2 | Each | |
| 109 | 109 | Total of Schedule 'A' |
AI Tender Summary
Tender Timeline
Dec 07, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 28, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Dec 05, 2020
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Dec 09, 2020
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 09, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 11, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender