Balance Work Of Slaughter House Near Zonal Hospital .
Tender Value
5.33 Lakhs
Estimated cost
Bid Submission
20 Nov 2020
0 days left
EMD
10700
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dharamshala → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Balance Work Of Slaughter House Near Zonal Hospital .
BOQ
| Name of Work-:-Name of work :- Balance work of Slaughter house near Zonal Hospital | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition above G.L.upto floor two level including disposal of unserviceable materials within 20 metres lead. un-reinforced cement concrete more than 15cm. Thickness including carriage of material in all leads and lift and direction of Engineer-in-charge. | 1.38 | Per Cubic meter | |
| 2 | 2 | Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres Pick Work including carriage of material in all leads and lift and direction of Engineer-in-charge. | 2.75 | Per Cubic meter | |
| 3 | 3 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like including carriage of material in all leads and lift and direction of Engineer-in-charge. | 33.49 | Per Square meter | |
| 4 | 4 | Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in:Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge. | 29.78 | Per Cubic meter | |
| 5 | 5 | Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. including carriage of material in all leads and lift and direction of Engineer-in-charge. | 8.64 | Per Cubic meter | |
| 6 | 6 | Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge. | 36 | Per Cubic meter | |
| 7 | 7 | Providing and fixing 1 mm thick M.S sheet garrage door with frame of 40 mmX 40mm X6mm angle iron 3.15 mm m.s gusset plates at the junctions and corners,all necessary fittings complete including applying a priming coat of red lead paint.Using M.S angles 40mm x 40mm x 6mm for diaganal braces including carriage of material in all leads and lift and direction of Engineer-in-charge. | 1.58 | Per Square meter | |
| 8 | 8 | Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flushpointing in white cement including carriage of material in all leads and lift and direction of Engineer-in-charge. | 28 | Per Square meter | |
| 9 | 9 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed withcement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and lift and direction of Engineer-in-charge. | 80.12 | Per Square meter | |
| 10 | 10 | Providing and laying soling/ boulder under flooring complete including carriage of material in all leads and lift and direction of Engineer-in-charge. | 4.05 | Per Cubic meter | |
| 11 | 11 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.In trusses and trussed purlins in buildings including carriage of material in all leads and lift and direction of Engineer-in-charge. | 14.48 | Per Quintal | |
| 12 | 12 | Brick work using common burnt clay building bricks inSuper-structure above plinth level upto floor two level (Second Class Bricks). in :-Cement Mortar 1:6 (1 Cement : 6 Sand) Second Class Bricks including carriage of material in all leads and lift and direction of Engineer-in-charge. | 11.04 | Per Cubic meter | |
| 13 | 13 | 10mm cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth Cement mortar 1:4 (1 cement:4 sand) including carriage of material in all leads and lift and direction of Engineer-in-charge. | 96 | Per Square meter | |
| 14 | 14 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not les than 7.75 kg per sq.m to window frames etc. including 60x20 mm beading complete including carriage of material in all leads and lift and direction of Engineer-in-charge. | 10 | Per Square meter | |
| 15 | 15 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of material in all leads and lift and direction of Engineer-in-charge. | 60 | Per Square meter | |
| 16 | 16 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of material in all leads and lift and direction of Engineer-in-charge. | 96 | Per Square meter |
AI Tender Summary
Tender Timeline
Nov 06, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 20, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender