Construction Of Workshop-V For Pharmaceutical Science Department For Academic Purpose At The Haringhata ( Nadia , West Bengal ) Campus Of Makaut , Wb .
Tender Value
14.69 Lakhs
Estimated cost
Bid Submission
19 Nov 2020
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
NH 12 Haringhata Simhat Pin 741249 → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Workshop-V For Pharmaceutical Science Department For Academic Purpose At The Haringhata ( Nadia , West Bengal ) Campus Of Makaut , Wb .
BOQ
| Name of Work:MAKAUT-WB/ET/2020-21/WORKSHOP-V/001 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Shedule item of works (CIVIL) | item1 | ||
| 2 | 2 | PWD Schedule 2017 Item No-2 /Page No-1 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.\n(a) Depth of excavation not exceeding 1,500 mm. % | item2 | 14.4 | Cum |
| 3 | 3 | PWD Schedule 2017 Item No-22(i) /Page No-34 Cement concrete with graded stone ballast (40 mm size excluding\nshuttering) \nIn ground floor\n(A) [Pakur Variety] (b) 1:4:8 proportion | item3 | 1.773 | Cu.M |
| 4 | 4 | PWD Schedule 2017 Item No-8 /Page No-15 Brick work with 1st class bricks in cement mortar (1:6)\n(a) In foundation and plinth | item4 | 5.91 | Cu.M. |
| 5 | 5 | PWD Schedule 2017 Item No-16 /Page No-16 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in\nground floor.\n | item5 | 63.814 | Sq.M. |
| 6 | 6 | PWD Schedule 2017 Item No-4 /Page No-2 (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of\nfinished quantity)\n | item6 | 30.668 | Cum |
| 7 | 7 | PWD Schedule 2017 Item No-4 /Page No-24 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding huttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety | item7 | 20.723 | Cu.M. |
| 8 | 8 | PWD Schedule 2017 Item No-6 /Page No-48 Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed\nwith topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).\nUsing grey cement (ii) 25 mm. thick | item8 | 226.005 | Sq. M |
| 9 | 9 | PWD Schedule 2017 Item No-1 /Page No-189 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar | item9 | ||
| 10 | 10 | (c) 15 mm thick plaster | item10 | 76.207 | Sq.M |
| 11 | 11 | PWD Schedule 2017 Item No-15 /Page No-192 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.\n | item11 | 274.371 | Sq.M |
| 12 | 12 | PWD Schedule 2017 Item No-2 /Page No-100 (3rd corringendum) M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables ......................i) For trusses spanning up to 12.00 m | item12 | 1.659 | MT |
| 13 | 13 | PWD Schedule 2017 Item No-14 /Page No-82 Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:-\na) With 0.5 mm thick sheet | item13 | 396.588 | Sq.M. |
| 14 | 14 | PWD Schedule 2017 Item No-17 /Page No-165 M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling ection 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete)\nIn ground floor\n | item14 | 196.019 | Sq.M. |
| 15 | 15 | PWD Schedule 2017 Item No-19 /Page No-181 Wall paneling with Gypsum Plaster Board of 12.5 mm thick fitted to G.I. channel of 55 mmx50 mm placed at 300 mm c/c in horizontal direction and metal stand 55 mmx48 mm placed @900 mm c/c in vertical direction connected with G.I.connecting clips. 12.5 mm thick Gypsum plaster based are to be fixed with G.I. channel by machine screws. The boards are to be joined with jointing compound and fibre tape and finished with top coat etc the rate includes the cost of all materials, labour charges including caffolding etc. complete as per direction of the Engineer-in-charge.\nIn ground floor\n | item15 | 141.6 | Sq.M. |
| 16 | 16 | Schedule item of Works (Elecrical) | item16 | ||
| 17 | 17 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish [PVC casing- capping on surface and Switch board concealed] | item17 | ||
| 18 | 18 | Average run 8 mtr | item18 | 10 | Nos |
| 19 | 19 | Average run 10 mtr | item19 | 10 | Nos |
| 20 | 20 | Average run 12 mtr | item20 | 8 | Nos |
| 21 | 21 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc | item21 | 10 | Nos |
| 22 | 22 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. | item22 | 45 | Nos |
| 23 | 23 | Supply & Fixing 240 V, 25A Modular starter (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc | item23 | 1 | Nos |
| 24 | 24 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc | item24 | 1 | Nos |
| 25 | 25 | Circuit/Sub main wiring : | item25 | ||
| 26 | 26 | Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) | item26 | ||
| 27 | 27 | 19mm dia 3mm thick Polythene Pipe | item27 | 150 | Nos |
| 28 | 28 | 25mm dia 3mm thick Polythene Pipe | item28 | 200 | Nos |
| 29 | 29 | Cutting channel of 40 mm X 40 mm size on masonary wall including S&F heavy gauge polythene pipe dia as stated below ,by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works | item29 | ||
| 30 | 30 | a)19 mm dia 3 mm thick polythene pipe without earth continuity wire | item30 | 50 | Nos |
| 31 | 31 | b)25 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire | item31 | 20 | Nos |
| 32 | 32 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required | item32 | ||
| 33 | 33 | 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) as ECC | item33 | 100 | Nos |
| 34 | 34 | 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC | item34 | 500 | Nos |
| 35 | 35 | 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC | item35 | ||
| 36 | 36 | Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing\nthe board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works(use at the place of | item36 | ||
| 37 | 37 | 2 Module | item37 | 2 | Nos |
| 38 | 38 | Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required | item38 | 10 | Nos |
| 39 | 39 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire | item39 | 10 | Nos |
| 40 | 40 | Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire | item40 | 10 | Nos |
| 41 | 41 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: | item41 | ||
| 42 | 42 | 30 cm (12\") | item42 | 6 | Nos |
| 43 | 43 | Fixing only louver shutter/cowl on wall with necy. bolts & nuts\n(6 mm dia x 62 mm long)\n | item43 | ||
| 44 | 44 | 30 cm (12\") | item44 | 6 | Nos |
| 45 | 45 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment | item45 | ||
| 46 | 46 | Legrand | item46 | ||
| 47 | 47 | 4 way | item47 | 2 | Nos |
| 48 | 48 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection | item48 | ||
| 49 | 49 | 6-32 A | item49 | 50 | Nos |
| 50 | 50 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection | item50 | ||
| 51 | 51 | 40 A | item51 | 1 | Nos |
| 52 | 52 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection | item52 | ||
| 53 | 53 | 40 A(DP) | item53 | 1 | Nos |
| 54 | 54 | 40 A(4P) | item54 | 1 | Nos |
| 55 | 55 | Fixing only pendent light fitting complete with lamp, shade and\n24/0.2 mm (1.5 sqmm) flexible copper wire incl. S&F pendent holder\n | item55 | 12 | Nos |
| 56 | 56 | Fixing only bulk head ceiling fitting on wall /ceiling by screws etc | item56 | 10 | Nos |
| 57 | 57 | Group wiring for stair case: | item57 | ||
| 58 | 58 | Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws | item58 | ||
| 59 | 59 | 100 mm x 100 mm x 65 mm | item59 | 5 | Nos |
| 60 | 60 | 150 mm x 100 mm x 65 mm | item60 | 2 | Nos |
| 61 | 62 | Supply of ceiling fan 1200 mm sweep complete with double ball bearing, motor blades, down rods, canopy, capacitor etc. (Make: Usha, Khaitan, standard, havells) | item62 | 10 | Nos |
| 62 | 63 | Supply of 225 mm dia exhaust fans complete with louvers and provision of interconnections with suitable size of cables from the ceiling rose / connector, etc. complete as required. | item63 | 6 | Nos |
| 63 | 64 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps 3 nos.modular socket outlet and 16 amps 1 no.modular switch, connection etc. as required. | item64 | 2 | Nos |
| 64 | 65 | Supply & installation of 4ft LED Tube inbuild Aluminium Heat Shrink cum reflector, Polycarbonate body, System Lumens 2100, not more than 20 wattage (Crompton Make : LTT8-20) with decorative box type, blue coloured end caps single LED tube fittings (Crompton Make : DMLN1LT8-16) | item65 | 12 | Nos |
| 65 | 66 | GST 12 %\n | item66 | 1 | Nos |
| 66 | 67 | Fixing only bulk head ceiling fitting on wall /ceiling by screws etc | item67 | 1 | Nos |
AI Tender Summary
Tender Timeline
Nov 04, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 21, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender