Assam Industrial Development Corporation Limited-AIDCLTD has published Construction Of Boundary Wall At Industrial Estate , Nathkuchi , Tihu. Submission Date for this Tender is 23-11-2020. Wall construction Tenders in Industrial Estate, Nathkuchi, Tihu, Assam Assam. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of Boundary wall at Industrial Estate, Nathkuchi, Tihu | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | EARTHWORK IN EXCAVATION\nEarthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\n(A) Up to a depth of 2.00m below the existing ground level.\n(a) In ordinary soil | item2 | 515.33 | cum |
| 2 | 2 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.\n(a).Brick on flat soling.\n | item3 | 435.61 | Sqm |
| 3 | 3 | PLAIN CEMENT CONCRETE WORKS\nPlain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).\n(a) In prop 1cement: 3 sand :6 coarse aggregate by volume\n\n | item4 | 43.56 | Cum |
| 4 | 4 | REINFORCED CEMENT CONCRETE WORKS\nProviding and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) \n(I) Using Mixer Machine | |||
| 5 | 4.1 | (A) In substructure up to plinth level\nFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.\nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item6 | 122.8 | Cum |
| 6 | 4.2 | (B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item7 | 36.05 | cum |
| 7 | 5 | TIMBER SHUTTERING (FORMWORK)\nProviding form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: | |||
| 8 | 5.1 | Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.\n(b) Using 25mm thick plank | item9 | 442.67 | sqm |
| 9 | 5.2 | Sides of tie beams, grade beams etc. at or below ground level.\n(b) Using 25mm thick plank | item10 | 521.64 | sqm |
| 10 | 5.3 | Columns, Pillars, Posts & Strut\n(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face\n(ii) Using 25mm thick plank | item11 | 433.27 | sqm |
| 11 | 5.4 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\n(a) For depth not exceeding 1.0M.\n(ii) Using 25mm thick plank | item12 | 97.75 | sqm |
| 12 | 6 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.\n(I) In Sub-structure upto plinth level including dewatering if necessary\n(a) In proportion 1:3. | item13 | 44.45 | cum |
| 13 | 7 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n(a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | item14 | 633.15 | sqm |
| 14 | 8 | CEMENT PLASTERING\n15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \n | |||
| 15 | 8.1 | A) On rough side\na) In cement mortar 1:3 | item16 | 1034.06 | sqm |
| 16 | 8.2 | B) On fair side\na) In cement mortar 1:3 | item17 | 1126.29 | sqm |
| 17 | 9 | REINFORCEMENT\nSupplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) | |||
| 18 | 9.1 | b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n (For Assam Type Bldg., drain works, retaining wall & boundary wall etc. .\n | item19 | 94.86 | Qtl |
| 19 | 9.2 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | item20 | 24.13 | Qtl |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
