| 1 | 1 | Demolition above G.L upto floor two level including disposal of unserviceable materials with 50m lead and including cutting the necessary reinforcement and separating out from R.C.C/R.B work. | | | |
|---|
| 2 | 1.1 | 13.7.1 R.C.C work | item1 | 30.3171 | cum |
|---|
| 3 | 2 | Demolition of brickwork above G.L upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 50m lead. | item2 | 8.3674 | cum |
|---|
| 4 | 3 | Dismantling cement asbestos celotex/hard board in ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50m lead ( frame work such as joists beams to be measured and paid separately). | item3 | 255.103 | sqm |
|---|
| 5 | 4 | Dismantling wooden boardings in lining of walls and partitions including frame work and stacking the serviceable materials within 50m leads. | item4 | | |
|---|
| 6 | 4.1 | 13.40.3 | item5 | 113.64 | sqm |
|---|
| 7 | 5 | Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including choukhats, architraves, holdfasts and other attachment etc. complete and stacking them within 50m lead. | item6 | 18 | each |
|---|
| 8 | 6 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item7 | 8.24756 | cum |
|---|
| 9 | 7 | 2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1 cement: 3 fine sand) | item8 | 6.31912 | cum |
|---|
| 10 | 8 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement :3 coarse sand ) in superstructure. | item9 | 208.063 | sqm |
|---|
| 11 | 9 | Cement plaster in fine sand | item10 | | |
|---|
| 12 | 9.1 | 11.1: 12mm cement plaster 1:3 (1 cement : 3 fine sand) | item11 | 586.29 | sqm |
|---|
| 13 | 10 | Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absoption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete. | item12 | 483.12 | sqm |
|---|
| 14 | 11 | Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absoption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3(1 cement : 3coarse sand) including grouting the joints with white cement and matching pigments etc, complete. | item13 | 113.4 | sqm |
|---|
| 15 | 12 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | item14 | 1158.07 | sqm |
|---|
| 16 | 13 | Applying one coat of cement primer of approved quality on wall surface. | item15 | 1158.07 | sqm |
|---|
| 17 | 14 | Painting (two or more coats) with plastic emulsion paint of approved quality on new work except walls to give an even shade. | item16 | 1158.07 | sqm |
|---|
| 18 | 15 | Distempering (two or more coats) with oil bound washable distemper of approved quality on new work i/c priming coat to give an even shade | item17 | 446.37 | sqm |
|---|
| 19 | 16 | Providing and fixing false ceiling at all height i/c providing and fixing of frame work made of special section , power pressed from MS sheets and galvanized with zinc coating of 120 grams/sqm ( both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm flange of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @230 mm interval, i/c fixing of gypsum board to 10.61.1: 12.5 mm thick tapered edge gypsum plain board conformimg to IS: 2095-Part I | item18 | 139.32 | sqm |
|---|
| 20 | 17 | Providing and fixing false ceiling at all height i/c providing and fixing of frame work made of special section , power pressed from MS sheets and galvanized with zinc coating of 120 grams/sqm ( both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm flange of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @230 mm interval, i/c fixing of gypsum board to 10.61.2: Fully Perforated Gypsum Plaster Board of size 1200 x 2400 x 12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Enginner-in | item19 | 440.62 | sqm |
|---|
| 21 | 18 | Providing and fixing wall paper of approved. Quality material: Unitex Elegant or equivalent (washable) to give an even shed. | item20 | 731.34 | Rs. |
|---|
| 22 | 19 | Providing & fixing 3mm thick ply wood plain lining with necessary screws, priming coat on unexposed surface etc. complete. | item21 | | |
|---|
| 23 | 19.1 | Commercial ply facing of approved manufacture: 19mm thick. | item22 | 650.06 | Rs. |
|---|
| 24 | 20 | Providing wood work in frame of false ceiling, partition etc sawn & put up in position.. | item23 | | |
|---|
| 25 | 20.1 | Uchan/Tairen/Tul wood.. | item24 | 15.99 | Rs. |
|---|
| 26 | 21 | Aluminium glazed windows and ventilators of standard aluminium extrusion section joints mitred and riveted/screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of glass panes 4 mm thick, projecting hinge, handles, peg stays, bolting devices, locking arrangements, spring catch & aluminium clip beading etc as required complete. | item25 | 13.8 | sqm |
|---|
| 27 | 22 | Providing wood works in frames of doors,windows, clerestory windows and other frames, wrought framed and fixed in position | item26 | | |
|---|
| 28 | 22.1 | a) Local best quality Uningthou | item27 | 1.47 | cum |
|---|
| 29 | 23 | P/F 40 mm. thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (with Ordinary type) with necessary screws. | item28 | | |
|---|
| 30 | 23.1 | 7.6.1 Local best quality Teak wood | item29 | 10.08 | cum |
|---|
| 31 | 24 | P/F flush door shutters commercial type core of block board construction with frame of 1st class hard wood and well matched commercial ply veneers 3mm thick on both faces of shutters i/c providing brass butt hinges with necessary screws etc. complete as directed and specified. 7.12.1: 40mm thick | item30 | 31.5 | sqm |
|---|
| 32 | 25 | Providing & fixing Brass handles with necessary screws etc. complete. 7.29.1: 125mm | item30 | 32 | each |
|---|
| 33 | 26 | Providing & fixing Brass Tower bolts(barrel type) with necessary screws etc. complete. 7.89.1: 250 x 10 mm. | item31 | 32 | each |
|---|
| 34 | 27 | Providing & fixing bright finished steel 100 mm door mortice latch & lock & a pair of levers handles with necessary screws etc. complete (Indian make of approved quality). | item32 | 16 | each |
|---|
| 35 | 28 | Providing & fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. | item33 | 16 | each |
|---|
| 36 | 29 | Providing & fixing aluminium aluminium extruded section body tubular type universal hydraulic door closer(having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701mm to 1000mm), with double speed adjustmnet with necessary screws etc. complete. | item34 | 5 | each |
|---|
| 37 | 30 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2074-1979 (welded and bolted including special shape washer etc. complete. Electric resistant welded tube (conforming to IS:1611-1979). | item35 | 1860.53 | kg |
|---|
| 38 | 31 | Trapezoidal Pre- painted Profile sheet roofing of approved brand DYNA roof or equivalent with selt drilling screws of 68mm long Xylon coated of purlins & trusses. Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.50mm/4.2kgs/sqm. | item36 | 112.76 | sqm |
|---|