Special Repair To Dsc Billets , Guard Rest Rooms , Repair Of Swt And Miscellaneous B/R Works At Af Stn Bagdogra Under Ge ( Af ) Bagdogra
Tender Value
24.50 Lakhs
Estimated cost
Bid Submission
24 Nov 2020
0 days left
EMD
49000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bagdogra → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Dsc Billets , Guard Rest Rooms , Repair Of Swt And Miscellaneous B/R Works At Af Stn Bagdogra Under Ge ( Af ) Bagdogra
BOQ
| Name of Work: SPECIAL REPAIR TO DSC BILLETS, GUARD REST ROOMS, REPAIR OF SWT AND MISCELLANEOUS B/R WORKS AT AF STN BAGDOGRA UNDER GE (AF) BAGDOGRA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Note 1: (Applicable for all parts/items) : The bidders/ contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates.\nNote 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. | |||
| 2 | 1.01 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and disposing, rubbish off the premises complete all as specified and directed. | 455 | Sqm | |
| 3 | 1.02 | M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces built in cement mortar 1:4, surface finished even and smooth complete all as specified and directed. | 95 | Sqm | |
| 4 | 1.03 | M&L for Coloured glazed ceramic tiles on vertical surface of size 350 x 250 x 7mm/ 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 mm thick backing with CM 1:3 complete all as specified and directed. | 95 | Sqm | |
| 5 | 1.04 | M&L for 15mm thick screed bed or bedding layer in CM (1:6) on concrete surface complete all as specified and directed. | 360 | Sqm | |
| 6 | 1.05 | M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified. | 260 | Sqm | |
| 7 | 1.06 | M&L for Non skid ceramic tile 7 to 8mm thick (Square or rectangular) colour tiles in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floors complete all as specified and directed. | 100 | Sqm | |
| 8 | 1.07 | Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. | 250 | RM | |
| 9 | 1.08 | Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. | 150 | RM | |
| 10 | 1.09 | Taking up or down 25 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. | 50 | RM | |
| 11 | 1.1 | S&F for 3-layer PP-R Polypropylene random copolymer) 15mm outer dia having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed. | 250 | RM | |
| 12 | 1.11 | S&F for 3-layer PP-R Polypropylene random copolymer) 20mm outer dia having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed. | 150 | RM | |
| 13 | 1.12 | S&F for 3-layer PP-R Polypropylene random copolymer) 25mm outer dia having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed. | 50 | RM | |
| 14 | 1.13 | Supply and fixed in repairs Vitreous china wash down water closet pan (pedestal pattern), floor mounted white with all fittings including fixing bolts, but excluding flushing cistern and flush pipe with and including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel / CP / aluminium / hinging device complete with including ‘P’ or ‘S’ trap complete all as specified and as directed. | 10 | Each | |
| 15 | 1.14 | Supply and fixed in repairs PVC low level flushing cistern, white, 10 litre capacity, syphonic action type, white body with inlet, ball valve, float , handle, bracket, 32mm bore steel chromium plated flush pipe etc and connecting to WC and water pipe lines complete all as specified and as directed | 10 | Each | |
| 16 | 1.15 | Supply and fixed in repairs Vitreous china wash hand basin, flat back, white of size 630x450mm including cutting for and pinning in ends of brackets with and including brackets and 32mm bore 1.50m long DPE waste pipe complete all as specified and as directed. | 6 | Each | |
| 17 | 1.16 | Supply and fixed in repairs 15mm bore Pillar taps, long neck cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long screwed shanks, fly-nuts, with screwed for 15mm bore GI pipe complete all as specified and as directed. | 6 | Each | |
| 18 | 1.17 | Supply and fixed in repairs 15 mm bore Angular Stop cocks, chromium plated (concealed type), screwed down, high pressure, screwed both ends for 15mm bore GI pipe or for union complete all as specified and as directed.\n\n | 6 | Each | |
| 19 | 1.18 | Supply and fixed in repairs 15 mm dia PVC connection pipes of 450 mm long with PTMT nut at both ends complete all as specified and as directed. | 6 | Each | |
| 20 | 1.19 | Supply and fixed in repairs PTMT Grating doom 125 mm dia with waste hole of having minimum weight 40gms complete all as specified and as directed. | 10 | Each | |
| 21 | 1.2 | Supply and fixed in repairs Towel rail, 600mm long chromium plated fixed with and including chromium plated brass screws with wooden plugs complete all as specified and as directed | 11 | Each | |
| 22 | 1.21 | Supply and fixed in repairs Shelf glass assembly 550 mm long brass chromium plated railing fixed with and including chromium plated brass screws with wooden plugs complete all as specified and as directed | 10 | Each | |
| 23 | 1.22 | Supply and fixed in repairs Soap dish brass chromium plated fixed with and including chromium plated brass screws with wooden plugs complete all as specified and as directed | 4 | Each | |
| 24 | 1.23 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality, glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | 4 | Each | |
| 25 | 1.24 | Demolition of cement concrete (unreinforced ) in ground floors and pavings n.exc 15cm thickness (below or above ground level) etc complete including dismantling of floor tiles etc complete all as specified and as directed. | 42.5 | Cum | |
| 26 | 1.25 | M&L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in base course complete all as specified and directed. | 100 | Sqm | |
| 27 | 1.26 | M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) 75mm thick as in plinth protection complete all as specified and directed. | 300 | Sqm | |
| 28 | 1.27 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed. | 100 | Sqm | |
| 29 | 1.28 | M&L for designer, pre-polished chequered cement concrete tiles with mixture of grey cement and pigments of size 30cm x30cmx25mm thick set in cement mortar jointed & pointed, laid over 20mm thick screed bed in CM 1:6 finished with pigments to match the shade of tiles complete all as specified and directed. | 100 | Sqm | |
| 30 | 1.29 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. And brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. | 50 | Sqm | |
| 31 | 1.3 | M&L for 25 mm average thick pading with plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate including using WPC as per manufacturer's instruction, finished even & smooth without using extra cement complete all as specified and directed. | 50 | Sqm | |
| 32 | 1.31 | M&L For Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surface complete all as specified and directed. | 50 | Sqm | |
| 33 | 1.32 | M&L For APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 kg/sqm) land on primed surface by forced application complete all as specified and directed. | 50 | Sqm | |
| 34 | 1.33 | Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickmness, including cover fillets complete all as specified and directed. | 150 | Sqm | |
| 35 | 1.34 | M&L for 4mm thick non asbestos fibre cement ceiling boards fixed or laid inserted to timber/ GI/ Aluminium framework with screw complete all as specified and directed. | 150 | Sqm | |
| 36 | 1.35 | S& F for anodized aluminium snap grid framework for false ceiling all as specified.(size of grid 605x605mm) complete all as specified and as directed | 150 | Sqm | |
| 37 | 1.36 | S&F for hangers 6mm dia G.I(upto 1200mm length) adjusting level fixed to roof slab by means of ceiling clits made out of G.I. flat 40x3mm size 60mm long complete all as specified and directed. | 150 | Sqm | |
| 38 | 1.37 | Dismantling plain or corrugated steel sheeting, any gauge thickness including National or similar pattern roof coverings complete all as specified and directed.. | 30 | Sqm | |
| 39 | 1.38 | S/F Pre-painted, galvalume, aluminium zinc coating, GI based, corrugated steel sheet, 0.50mm thick of any colour/camouflage pattern, having tensile strength of 550 Mpa, as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. | 30 | Sqm | |
| 40 | 1.39 | S & F Mild Steel Tubular truss pipe as in truss purlins, post etc, including cutting welding etc confirming to IS-1161-1998, grade ST-240 complete all as specified and directed. | 200 | Kg | |
| 41 | 1.4 | S&F plate plain or chequred including welding & drilling holes etc confirming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed. | 20 | Kg | |
| 42 | 1.41 | M&L two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm in width or girth , not otherwise described all as specified and as directed. | 15 | Sqm | |
| 43 | 1.42 | Taking down chowkats with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed. | 10 | Each | |
| 44 | 1.43 | Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 sqm and n.exc 4 sqm each and removing from the site complete all as specified and as directed. | 13 | Each | |
| 45 | 1.44 | S&F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. | 0.5 | Cum | |
| 46 | 1.45 | S&F 2nd class hard wood 30 mm thick glazed and skelton shutter open rebated factory made and prepared to receive glass / gauge etc, edges of framing plain, chamferred or rounded and fitted with cut and mitred beads for securing gauge, size of mambers as per SSR Part - I section clause 8.20 (a) complete all as specified and as directed | 11 | Sqm | |
| 47 | 1.46 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. | 12 | Sqm | |
| 48 | 1.47 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed. | 38 | RM | |
| 49 | 1.48 | S&F mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25x3mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly tarred surfaces with clean sharp sand complete all as specified and directed. | 5 | Kg | |
| 50 | 1.49 | S&F 250 mm long Aluminum alloy anodised, sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all complete as specified and as directed. | 5 | Each | |
| 51 | 1.5 | Cutting holes in brick wall Exc. Half brick but n.exc full brick built in cement morter for incerting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 complete all as specified. | 30 | Each | |
| 52 | 1.51 | S&F 100 mm aluminium alloy handle anodised fabricated type complete all as specified and directed | 16 | Each | |
| 53 | 1.52 | S&F 150 mm aluminium alloy handle anodised fabricated type complete all as specified and directed | 10 | Each | |
| 54 | 1.53 | Supply & Fix Mild steel Butt hinges, medium weight, cold rolled of size 50mm complete all as specified and directed | 40 | Each | |
| 55 | 1.54 | Supply & Fix Mild steel Butt hinges, medium weight, cold rolled of size 100mm complete all as specified and directed | 39 | Each | |
| 56 | 1.55 | S&F aluminium anodised barrel tower bolt 125 mm complete all as specified and directed . | 30 | Each | |
| 57 | 1.56 | S&F aluminium anodised barrel tower bolt 200 mm complete all as specified and directed . | 26 | Each | |
| 58 | 1.57 | S&F 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed | 5 | Each | |
| 59 | 1.58 | S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks/ wire staple / fitted with beads. complete all as specified and directed | 36 | Sqm | |
| 60 | 1.59 | Hacking out old broken glass any thickness or size from wooden or matle frames glazed with putty or beads complete all as specified and directed | 4 | Sqm | |
| 61 | 1.6 | S&F Plain sheet glass pane, 3 mm thick, ordinary quality and glazing with oil putty or beads in square not exc. 0.5 Sqm each pane complete all as specified and directed. | 4 | Sqm | |
| 62 | 1.61 | M&L for preparation new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 40 | Sqm | |
| 63 | 1.62 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. | 200 | Sqm | |
| 64 | 1.63 | M&L for 20mm thick (12+8)mm in two layers rendering on fair/ rough faces of brick work or concrete surfaces built in cement mortar 1:4, using water proofing compound on top 8mm layer as per manufacturer instructions, surface finished fair and even complete all as specified and directed.\nNote:- Water proofing Compound shall be measured and paid seperately. | 120 | Sqm | |
| 65 | 1.64 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth with using bond material for rusted steel complete all as specified and directed. | 80 | Sqm | |
| 66 | 1.65 | Preparation of new plastered or un plastered surfaces of walls including cornices, pilasters etc and applying two coat of cement base paint over a coat of primer complete all as specified and directed. | 80 | Sqm | |
| 67 | 1.66 | Supply only integral water proofing compound complete all as specified and directed. | 45 | Kg | |
| 68 | 1.67 | S&F factory made uPVC white colour casement/sliding window/door frame (60mmx58mm), made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket,1.2-+ 0.2 mm thick galvenized steel profile to be inserted in required profile,frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed .(Glazing, Hardware hings and fitting, EPDM rubber gasket etc, to be paid separately.\nNote : Each member of window to be measured separately with clear length \n | 27 | RM | |
| 69 | 1.68 | S&F factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm( +0.2 mm). Window profile with hollow section with multi chamber, frame (60 mm x 58 mm), sash (60 mm x 78 mm), T profile (one vertical length in between two shutters) (60 mm x 74 mm), Glazing bead ( 35 mm x 20 mm) will be mitered cut and fusion welded at all corners,including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket,1.2 mm -+ 0.2 mm thick galvanized steel frame (28mm x 21.5 mm), sash (31mm x 27mm), T profile, frame will be fixed to the wall with 8mm x 100mm long fasteners .Hardware : ( casement door handle made of zinc alloyed (white powder coated), corner striker, secondary strikers,cylinder, door transmission gear made of mild steel with multi point locking system with strikers,3D Hinges of zinc alloyed ( white powder coated)) and 5 mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured for payment purpose.) | 10 | Sqm | |
| 70 | 1.69 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. | 3.4 | Qtl | |
| 71 | 1.7 | S&F Rolled sections Fe 290 (Gde E165) as framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc all as specified and directed. | 120 | Kg | |
| 72 | 2 | E/M WORKS | |||
| 73 | 2.01 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power) alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fittings, regulators, sockets, main switches, DB etc) removing materials to store & making good disturbed surfaces of wall/ floors etc complete all as specified & directed. | 182 | Point | |
| 74 | 2.02 | M & L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/ pressed steel terminal boxes of size 1.6mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end for one light point / one fan point controlled by one, one way switch complete all as specified and directed. | 105 | Point | |
| 75 | 2.03 | All as per ser item No. 2.02 here-in-before but one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire. | 12 | Point | |
| 76 | 2.04 | All as per ser item No. 2.02 here- in-before but for 5amp socket on independent board. | 45 | Point | |
| 77 | 2.05 | All as per ser item No. 2.02 here-in-before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4.0 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.\nNote for item Nos 2.02 to 2.05:- Unit rate includes for cutting chases for conduits and sinking for boxes and making good to wall, floors etc to match with the existing surfaces. | 20 | Point | |
| 78 | 2.06 | Supply and fixing of switch piano flush button 5 Amp single pole, one way 230 volts white finish all as specified & directed. | 117 | Each | |
| 79 | 2.07 | Supply and fixing of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts, single pole, one way, suitable for 3 pin/ 2pin 5 Amp plug top white/ ivory finish all as specified & directed. | 12 | Each | |
| 80 | 2.08 | Supply and fixing of switch socket combination flush type 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/ 2pin, 5 Amp, plug top white/ ivory finish all as specified & directed. | 45 | Each | |
| 81 | 2.09 | Supply and fixing of switch socket combination multi-purpose flush type 2 in 1 type (3 and 3 pin ) 5/15 Amps, 230V, AC complete all as specified and directed. | 20 | Each | |
| 82 | 2.1 | Supply and fix ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ ivory finish complete all as specified and directed. | 105 | Each | |
| 83 | 2.11 | Supply and fix stepped type fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400 mm sweep including connecting up complete all as specified and directed. | 24 | Each | |
| 84 | 2.12 | Supply and fix in repair LED tube light fitting 20watt, 4 feet, PVC extruded batten complete with retrofit T5 Polycarbonate tube with connector block, etc. complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.. Make - HPL/ Crompton/ Havells/ Philips | 58 | Each | |
| 85 | 2.13 | Supply and fix in repair LED tube light fitting 10 watt, 2 feet, PVC extruded batten complete with retrofit T5 Polycarbonate tube with connector block, etc. complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make - HPL/ Crompton/ Havells/ Philips. | 10 | Each | |
| 86 | 2.14 | Supply and fixing in repair LED street light fitting 40 watt complete with powder coated die cast aluminium compact,IP 66 protection complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make -HPL Cat No. HPLLEDSl4060S or equivalent make of Bajaj/ Crompton/ Havells. \nNote : Adequate size of bracket / clamps, nut, bolts, washers, etc required at site is deemed to be included in this item rates. | 6 | Each | |
| 87 | 2.15 | Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits of suitable size including 6 Sqmm 1100Volts grade, FRLSH type, PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. \nNote:- (i) Two runs of single core cables + one run of continuous earthed cable + one run of PVC conduit shall be measured as one unit. \n(ii) Cutting chases for conduits and sinking for boxes and making good to wall, floors etc are deemed to be included in the quoted rate. | 40 | RM | |
| 88 | 2.16 | Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded copper conductor 1100Volts grade, FRLSH type, cables 4 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits of suitable size including 4 Sqmm 1100Volts grade, FRLSH type, PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. \nNote:- (i) Two runs of single core cables + one run of continuous earthed cable + one run of PVC conduit shall be measured as one unit. \n(ii) Cutting chases for conduits and sinking for boxes and making good to wall, floors etc are deemed to be included in the quoted rate. | 20 | RM | |
| 89 | 2.17 | Material and labour for taking down of existing old DBs of any size and make with MCBs and connection, fixing the same after completion of B/R works including making a proper arrangement of lugs and other necessary connected items complete all as specified and directed. | 8 | Each | |
| 90 | 2.18 | Supply and fix of distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways complete all as specified and directed. Make : Indo Asian/Havells / L&T/HPL/Hager/Legrand. | 4 | Each | |
| 91 | 2.19 | Supply and fix of distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways complete all as specified and directed. Make : Indo Asian/Havells / L&T/HPL/Hager/Legrand. | 3 | Each | |
| 92 | 2.2 | Supply and fix of distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 12 ways complete all as specified and directed. Make : Indo Asian/Havells / L&T/HPL/Hager/Legrand. | 1 | Each | |
| 93 | 2.21 | Supply and Fixing of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA complete all as specified and directed. Make : Indo Asian/Havells/L&T/HPL/ Hager/Legrand. | 7 | Each | |
| 94 | 2.22 | Supply and Fixing of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA complete all as specified and directed. Make : Indo Asian / Havells/ L&T/HPL/Hager/ Legrand. | 34 | Each | |
| 95 | 2.23 | M & L in replacement Earthing complete with MS galvanized plate of size 60 cm x 60 cm x 6 mm thick electrode buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI 4mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 15 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion. | 6 | Each set | |
| 96 | 2.24 | M & L for Taking down ceiling fan/ exhaust fan of any make and size complete all as specified and directed. \n | 31 | Each | |
| 97 | 2.25 | Material & Labour for hanging ceiling fan in position and re-commissioning the same including making electric connection ,painting as per existing colour paint , writing MES No with black paint complete all as specified and directed. | 24 | Each | |
| 98 | 2.26 | Material & Labour for fixing Exhaust fan in position and re-commissioning the same including making electric connection ,painting as per existing colour paint , writing MES No with black paint complete all as specified and directed. | 7 | Each |
AI Tender Summary
Tender Timeline
Nov 03, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 01, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender