uttarakhand housing and urban development authority has published Civil And Finishing Work Of Proposed Redevelopment Work Of Sattal Lake. Submission Date for this Tender is 23-11-2020. Civil Work Tenders in WORKS Uttarakhand. Bidders can get complete Tender details and download the document.
Name of Work: CONSTRUCTION OF PROPOSED REDEVELOPMENT WORK SATTAL LAKE DISTT- NAINITAL | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | SOR # | Quantity | Units | |
1 | 100 | Redevelopment Works | |||
2 | 101 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared | 9195 | Sqm | |
3 | 102 | Earthwork in Hill Road (Hill Side Cutting) Excavation in soil in Hilly Area by mechanical means Excavation in soil in Hilly Area by mechanical means Without useinng Dozer including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1\n | 4597.5 | Cum | |
4 | 103 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)Cement mortar 1:6 (1 cement : 6 coarse sand) | 2500.87 | Cum | |
5 | 104 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil\n\n | 4597.5 | Cum | |
6 | 105 | Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/ bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed\nwithout prior approval of Engineer-in-Charge. | 450 | Rmt | |
7 | 106 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | 973.79 | Cum | |
8 | 107 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | 627.8 | Cum | |
9 | 108 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size | 242.01 | Cum | |
10 | 109 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm | 358.38 | Cum | |
11 | 110 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars | 42554.9 | kg | |
12 | 111 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete | 293.18 | Sqm | |
13 | 112 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | 139.87 | Sqm | |
14 | 113 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform \n | 2345.62 | Sqm | |
15 | 114 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | 311.27 | Sqm | |
16 | 115 | Columns, Pillars, Piers, Abutments, Posts and Struts | 212.91 | Sqm | |
17 | 116 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)Cement mortar 1:6 (1 cement : 6 coarse sand) | 202.74 | Cum | |
18 | 117 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) | 340.72 | Cum | |
19 | 118 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) | 41.52 | Sqm | |
20 | 119 | Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical\nspecifications Clause 305.1 of MORD Specifiction | 352.5 | Cum | |
21 | 120 | Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction\n | 194.58 | Cum | |
22 | 121 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction\n | 259.44 | Cum | |
23 | 122 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) | 158.22 | Cum | |
24 | 123 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand) | 92.81 | Cum | |
25 | 124 | Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.Red sand stone | 6.7 | Cum | |
26 | 125 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade | 31.56 | Sqm | |
27 | 126 | Providing and fixing 2nd class teak /Deodar wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface.25 mm thick | 1339.45 | Sqm | |
28 | 127 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 17797.6 | Kg | |
29 | 128 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. Complete 40 mm thick with 20 mm nominal size stone aggregate \n | 146.88 | Sqm | |
30 | 129 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.Red sand stone | 11669.1 | Sqm | |
31 | 130 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) \n | 3532.98 | Sqm | |
32 | 131 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) | 50.43 | Sqm | |
33 | 132 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm | 1934.58 | Sqm | |
34 | 133 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover \n | 163.2 | Sqm | |
35 | 134 | Providing and fixing ball bearing for rolling shutters. \n | 32 | Nos | |
36 | 135 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer | 1508.4 | Sqm | |
37 | 136 | providing & Fixing Roof Slate size 100x150mm | 475.23 | Sqm | |
38 | 137 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | 516.68 | Sqm | |
39 | 138 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).\n | 150.12 | Sqm | |
40 | 139 | Providing Cartridge Filter manufactured with simultaneous projection of resin and Fiber Glass construction including Cartridge ,Dia. 300 mm, Max. working press.2.5 kg/cm2 Flow rate : 10 m3/hr with outlet 50 mm Complete with pressure gauge panel etc. | 1 | Nos | |
41 | 140 | Return adjustable flow , Made in ABS, Screw in SS | 5 | Nos | |
42 | 141 | Water dependent Geyser jet /foam effect Nozzle Size Suitable for 1" Pipe | 20 | Nos | |
43 | 142 | Open well pump with Cast Iron Body, Delivery casing Cast Iron , motor body cast iron, Shaft Stainless Steel , with motor - 2890 rpm, ph, Rated Voltage 380, 1 hp | 2 | Nos | |
44 | 143 | Ring LED Light 6 Watt | 20 | Nos | |
45 | 144 | Power Supply for color changing option by the remote | 14 | Nos | |
46 | 145 | Electric panel for all pump & light includind all cable and conduits. | 1 | Nos | |
47 | 146 | Providing uPVC ball valve, butterfly valve,UPVC Piping including fittings, and all accessories | 1 | Nos | |
48 | 147 | Erection and commissioning water body including all piping, conduting and lighting. | 1 | Nos | |
49 | 148 | Maintenance Kit Accessories | |||
50 | 149 | SS Trolley mounted with 1 HP pump and filter with 20mtr cable and starter | 1 | Nos | |
51 | 150 | Vacuum Head IN Aluminum with rob Size 300 mm | 1 | Nos | |
52 | 151 | Floating Hose - 15 mtr long | 1 | Nos | |
53 | 152 | Curved Brush 300 mm | 1 | Nos | |
54 | 153 | Telescopic Handle 3 Meter | 1 | Nos | |
55 | 154 | 3 x 50 + 1 x 35 MM | 40 | Nos | |
56 | 155 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). | 1.32 | Cum | |
57 | 156 | Providing and fixing Wooden Bench | 16 | Nos | |
58 | 157 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm dia. nominal bore | 525 | Meter | |
59 | 158 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm dia. nominal bore | 10 | Meter | |
60 | 159 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore | 175 | Nos | |
61 | 160 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm dia. nominal bore | 4 | Nos | |
62 | 161 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 | 20 | Nos | |
63 | 162 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. | 20 | Nos | |
64 | 163 | Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore | 7 | Nos | |
65 | 164 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore (Horizontal) | 1 | Nos | |
66 | 165 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 1000 | Nos | |
67 | 166 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked black solid plastic seat and lid | 7 | Nos | |
68 | 167 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap | 7 | Nos | |
69 | 168 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.100 mm nominal inner dia Pipes | 15 | Meter | |
70 | 169 | 75 mm diameter : | 20 | Meter | |
71 | 170 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : for 110 mm dia pipe | 5 | Nos | |
72 | 171 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : for 75 mm dia pipe | 7 | Nos | |
73 | 172 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : | 12 | Nos | |
74 | 173 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia | 7 | Nos | |
75 | 174 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | 7 | Nos | |
76 | 175 | Providing and fixing double equal plain junction of required degree. 100x100x100mm | 8 | Nos. | |
77 | 176 | Providing and fixing double equal plain junction of required degree. 75x75x75x75 mm | 7 | Nos. | |
78 | 177 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm diameter pipe | 8 | Nos | |
79 | 178 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 75 mm diameter pipe | 7 | Nos | |
80 | 179 | URINAL -Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern | 4 | Nos | |
81 | 180 | MANHOLE- 1.68 m deep with SFRC Cover and frame (heavy duty HD20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : | 3 | Nos | |
82 | 181 | MANHOLE COVER - Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 Rectangular shape 600x450 mm internal dimensions | 3 | Nos. | |
83 | 182 | WATERPROOFING - Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. | 591.86 | Sqm | |
84 | 183 | SEPTIC TANK & SOAK PIT - Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 14.62 | Cum | |
85 | 184 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 Rectangular shape 600x450 mm internal dimensions | 2 | Nos | |
86 | 185 | Inlet Pipe 100 mm dia | 1 | Nos | |
87 | 186 | Outlet Pipe 100 mm dia | 1 | Nos | |
88 | 187 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long co mplete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 1 | Nos | |
89 | 188 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge Extruded section profile size 48x40 mm | 50.1 | Mtr | |
90 | 189 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. | 16.47 | Sqm | |
91 | 190 | HORTICULTURE WORK | |||
92 | 191 | Supplying & Fixing Hedge | 6520 | Nos | |
93 | 192 | Supplying & Fixing Ground covers | 5000 | Nos | |
94 | 193 | Supplying & Fixing Flower bed | 1000 | Nos. | |
95 | 194 | Providing and Displaying Allyssum white in full bloom well developed fresh & healthy Plant in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. | 400 | Nos. | |
96 | 195 | SProviding and stacking of Allamanda cathartica of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. | 65 | Nos. | |
97 | 196 | Supply and stacking of fox tail palms\n\n | 40 | Nos. | |
98 | 197 | Supply and stacking of king palms\n\n | 35 | Nos. | |
99 | 198 | Supply and stacking of travellers palms\n\n | 25 | Nos. | |
100 | 199 | Supply and stacking of areca palms\n\n | 25 | Nos | |
101 | 200 | Supply and stacking of furcarea\n\n | 20 | Nos. | |
102 | 201 | Supply and stacking of crotans\n\n | 200 | Nos. | |
103 | 202 | Supplying & Stacking of Selection No.1/doob grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.\n\n | 9562 | Sqm | |
104 | 203 | ELECTRIC WIRING | |||
105 | 204 | Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. | 1550 | Mtr | |
106 | 205 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cuttting the wall and making good the same in case of recessed conduit as required. | 1550 | Mtr | |
107 | 206 | Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | 4 | Nos | |
108 | 207 | SUPPLY OF LED Glass Bulb B22, 15 W ,6000k /4000k/3000K ,230/250 Volt,50 HZ ETC, complete in all aspects as per direction of Engineer in Charge. | 30 | Nos | |
109 | 208 | LT XLPE CABLES | |||
110 | 209 | Supply,of following sizes of PVC sheathed LT XLPE armoured, aluminium 1.1KV grade, as required of the following sizes. | |||
111 | 210 | 3.5c x 95 sq.mm cable | 650 | Rm | |
112 | 211 | 3.5c x 50 sq.mm cable | 250 | Rm | |
113 | 212 | 3.5c x 25 sq.mm cable | 200 | Rm | |
114 | 213 | 4c x 16 sq.mm cable | 150 | Rm | |
115 | 214 | LIGHT POLE | |||
116 | 215 | Supply & fixing of Two Ballon Type Decorative Street Light | 25 | Nos | |
117 | 216 | Supply & fixing of Urban Decorative Type Pole | 60 | Nos | |
118 | 217 | Supply & fixing of Bollard light | 150 | Nos | |
119 | 218 | Supply & fixing High Mast Light 16 Mtr Light | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail