Special Repairs To Building No S-35 And Certain Lbw And Rev Works At Masimpur Mil Stn Under Ge Silchar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2020
0 days left
EMD
37000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MASIMPUR → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repairs To Building No S-35 And Certain Lbw And Rev Works At Masimpur Mil Stn Under Ge Silchar
BOQ
| SPECIAL REPAIRS TO BUILDING NO S-35 AND CERTAIN LBW AND REV WORKS AT MASIMPUR MIL STN UNDER GE SILCHAR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART-I (B/R WORKS)\nTaking down Chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed. | 21 | Each | |
| 2 | 2 | Taking down Chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed. | 2 | Each | |
| 3 | 3 | Taking down of shutter of any description, exceeding 1 sqm and not exceeding 2 sqm each & refixing in same position after repairs complete all as specified and directed. | 10 | Per Leaf | |
| 4 | 4 | Taking up or down 15mm dia GI steel tubing and connections complete all as specified and directed. | 8 | RM | |
| 5 | 5 | Taking up or down 20mm dia GI steel tubing and connections complete all as specified and directed. | 22 | RM | |
| 6 | 6 | Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for key scrubbing down with water all as specified. | 90 | Sqm | |
| 7 | 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 26 | Sqm | |
| 8 | 8 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed. | 7 | Sqm | |
| 9 | 9 | Dismantling of timber fillets rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position in unframed work complete all as specified and directed. | 60 | RM | |
| 10 | 10 | Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets complete all as specified and directed. | 20 | Sqm | |
| 11 | 11 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. | 1 | Cum | |
| 12 | 12 | Demolition of reed lathing, single or double including battens and plaster or chiken wire lathing complete all as specified and directed. | 30 | Sqm | |
| 13 | 13 | Demolition cement concrete (reinforced) of any description fin ground floor not exceeding 15 cm thickness (below or above ground level) reinforcement cut to facilitate demolition complete all as specified and directed. | 3 | Cum | |
| 14 | 14 | Excavation in trenches n.exc. 1.50 m deep and 1.50 m wide and getting out in soft/loose soil complete all as specified and directed. | 34.35 | Cum | |
| 15 | 15 | Returning filling in incl watering, ramming in layers n.exc. 25cm thick in soil complete all as specified and directed. | 21.48 | Cum | |
| 16 | 16 | Removing excavated surplus soil to a distance n.exc. 50m and depositing where directed at level n.exc. 1.50m above the starting point complete all as specified and directed. | 12.87 | Cum | |
| 17 | 17 | Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out soft/ disintegrated rock returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and makind good surface complete all as specified and directed. | 8 | Each | |
| 18 | 18 | M&L for PCC 1:4:8 type D2 (using 40mm stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. | 2.5 | Cum | |
| 19 | 19 | Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and directed. | 6.85 | Sqm | |
| 20 | 20 | Use and waste of Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed. | 14 | Sqm | |
| 21 | 21 | Use and waste of form work to chullah hoods, chajjas, shelves troughs and similar items including edges, for rough finished flat surfaces of concrete complete all as specified and directed. | 30.55 | Sqm | |
| 22 | 22 | Use and waste of Form work to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantilevers, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and directed. | 21 | Sqm | |
| 23 | 23 | M&L for formwork to edges of roof slab exc 5cm wide but n. exc 10cm wide as rough finished surfaces of concrete complete all as specified and directed. | 12 | RM | |
| 24 | 24 | M&L for formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar works n.exc, 200mm thick (Horizontal or sloping) for flat surfaces as rough finished surfaces of concrete complete all as specified and directed. | 8 | Sqm | |
| 25 | 25 | Material and labour for providing Reinforced Cement Concrete M-25 (Design mix ) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed. | 1.2 | Cum | |
| 26 | 26 | Material and labour for providing Reinforced Cement Concrete M-25 (Design mix ) using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. | 1 | Cum | |
| 27 | 27 | Material and labour for providing Reinforced Cement Concrete M-25 (Design mix ) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed. | 1.05 | Cum | |
| 28 | 28 | Material and labour for providing Reinforced Cement Concrete M-25 (Design mix ) using 20 mm graded aggregate as in Chajja etc complete all as specified and directed. | 3.03 | Cum | |
| 29 | 29 | M&L RCC M-25 (Design mix ) using using 20 mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed. | 0.8 | Cum | |
| 30 | 30 | Material and labour for 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. | 460 | Kg | |
| 31 | 31 | All as per item No. 30 here in before but 6mm to 8mm dia | 170 | Kg | |
| 32 | 32 | All as per item No. 30 here in before but mild steel bar 5 mm and over up to 10 mm dia as in stirrups, spacers and binders complete all as specified and directed. | 120 | Kg | |
| 33 | 33 | M&L for 10mm thick plaster in CM 1:3 finished fair and even on RCC roof slab incl mixing of WPC complete all as specified and directed.\nNote :- WPC shall be measured and paid for separately | 8 | Sqm | |
| 34 | 34 | M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. | 2.5 | Cum | |
| 35 | 35 | M&L for half brick work with sub class 'B' bricks straight or curved on plan to radius built in cement mortar 1:4 complete all as specified and directed. | 80 | Sqm | |
| 36 | 36 | M&L for 75 mm thick PCC 1:3:6 type C2 (40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. | 4 | Sqm | |
| 37 | 37 | M&L for 40mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in flooring finished fair and complete all as specified and directed. | 274 | Sqm | |
| 38 | 38 | M&L for 25mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in flooring finished fair and complete all as specified and directed. | 65 | Sqm | |
| 39 | 39 | M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid shall be alternate panels and joints filled with bituminous 1 part and 3 part of sand complete all as specified and directed. | 92 | Sqm | |
| 40 | 40 | M&L for cutting holes to existing man hole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) CM 1:2:4 type B1 smooth finished, and removing benching as required complete all as specified and directed. | 1 | Each Job | |
| 41 | 41 | M&L for 3mm thick glass dividing strip 38mm deep and inserted in position to conform to design complete all as specified and directed. | 285 | RM | |
| 42 | 42 | M&L plain cement concrete type C1 (1:3:6) using 20 mm graded aggregate in surface channel/drain complete all as specified and directed. | 0.5 | Cum | |
| 43 | 43 | M&L for Non skid ceramic coloured tiles 7mm thick area exc 0.06 sqm but not exc 0.11 sqm each in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement te match including 15mm thick screed bed of CM 1:6 complete all as specified and directed. | 4 | Sqm | |
| 44 | 44 | M&L for Non skid ceramic coloured tiles 7mm thick area exc 0.11 sqm but not exc 0.18 sqm each in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement te match including 15mm thick screed bed of CM 1:6 complete all as specified and directed. | 65 | Sqm | |
| 45 | 45 | S&F Glazed ceramic colour tiles (300x450x7mm thick) on dado & skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile complete all as specified and directed. | 32 | Sqm | |
| 46 | 46 | S&F Steel tubular trusess, purlins, rafters including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-240 complete all as specified and directed. | 490 | Kg | |
| 47 | 47 | S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'A' complete all as specified and directed. | 50 | Kg | |
| 48 | 48 | S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each exc 5cm but n.exc 10cm long dia 11 to 15mm necessary fitting complete all as specified and directed. | 7 | Kg | |
| 49 | 49 | Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering /wall cladding complete all as specified and directed. | 442 | Sqm | |
| 50 | 50 | S&F Prepainted galvalume aluminium zinc coating steel based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof coverings/ claddings to wall, fixed with self tapping screws complete all as specified and directed. | 456 | Sqm | |
| 51 | 51 | S&F Prepainted galvalume aluminium zinc coating steel based plain steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof coverings/ claddings to wall, fixed with self tapping screws complete all as specified and directed. | 37 | Sqm | |
| 52 | 52 | Steel windows with side hung shutters including box type hinges with steel handles, 2 Nos steel tower bolts 100mm long peg stay complete with glazing bars, dovetailed or welded, including locking arrangements complete all as specified and directed. | 14 | Sqm | |
| 53 | 53 | All as per item No. 52 above but without glazing bars | 12 | Sqm | |
| 54 | 54 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed. | 7.5 | Sqm | |
| 55 | 55 | Material and labour for 4 mm thick Asbestos cement plain building boards, fixed to timber framework with screws complete all as specified and directed. | 20 | Sqm | |
| 56 | 56 | S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and or riveted, or forged in to spikes; framed guard bars; similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. | 205 | Kg | |
| 57 | 57 | M&L Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides including 6/8mm thick polished teak wood lipping around the door properly fixed complete all as specified and directed. | 4 | Sqm | |
| 58 | 58 | M&L for 10mm thick cement plaster in CM 1:6 on brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | 70 | Sqm | |
| 59 | 59 | M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair faces of brick wall or condrete surfaces in CM (1:6) & water proofing compound mixed with second layer @ 3% finished even and smooth using extea cement complete all as specified and directed.\nNote -WPC shall be measured and paid separetly. | 105 | Sqm | |
| 60 | 60 | Supply only WPC complete all as specified and directed. | 1 | Kg | |
| 61 | 61 | Supply and fix in repairs Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. | 1 | Each | |
| 62 | 62 | S & F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and directed. | 9 | RM | |
| 63 | 63 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed.\n | 2.8 | Sqm | |
| 64 | 64 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putting square n. exc 0.5 sqm in each pane complete all as specified and directed. | 20 | Sqm | |
| 65 | 65 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. | 1 | Each | |
| 66 | 66 | M&L for providing plain cement concrete 1:3:6 type C0 (using 12.50 mm graded stone aggregate) as in filling hollow of pressed steel frame and hold fast etc. complete all as specified and directed. | 0.2 | Cum | |
| 67 | 67 | Supply and fix Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one or more rebates including hinges (100/50mm stainless steel),lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified. | 10 | RM | |
| 68 | 68 | M&L Plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs benching and similar work including necessary form work complete all as specified and directed. | 0.2 | Cum | |
| 69 | 69 | M&L MS work as in hold fasts, bands, straps, wall ties, plain angle cleats and similar articles including welding and all necessary labour conforming to Fe 250 Gde-E-165 complete all as specified and directed. | 40 | Kg | |
| 70 | 70 | Aluminium sliding door bolt, 300 mm, plate type, stove enameled black, with bright bolt not less than 12 mm dia, with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed. | 1 | Each | |
| 71 | 71 | S&F Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 200mm long complete all as specified and directed. | 4 | Each | |
| 72 | 72 | S&F Aluminium handle cast type anodized of size 125mm complete all as specified and directed. | 6 | Each | |
| 73 | 73 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel staple complete all as specified and directed. | 15 | Sqm | |
| 74 | 74 | S&F Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 150mm long complete all as specified and directed. | 3 | Each | |
| 75 | 75 | S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size, complete all as specified and directed. | 12 | Each | |
| 76 | 76 | Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. | 13 | RM | |
| 77 | 77 | All as per item No. 76 here in before but 20 mm bore. | 22 | RM | |
| 78 | 78 | All as per item No. 76 here in before but 25 mm bore. | 30 | RM | |
| 79 | 79 | Supply and fix vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection & fixed in PCC complete all as specified and directed. | 2 | Each | |
| 80 | 80 | S&F PVC valve less syphonic action type of capacity 10 ltrs, low level flushing cistern, white with inlet, ball valve float and handle including brackets complete all as specified and directed. | 2 | Each | |
| 81 | 81 | Supply and fix vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. | 2 | Each | |
| 82 | 82 | Supply & fix Vitreous China urinals, half stall type flat back of size 465 x 355 x 265 mm white (minimum), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) but inclusive of urinal spreader of PTMT (minimum weight 60 grm) complete all as specified and directed. | 3 | Each | |
| 83 | 83 | Supply and fix 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead, cement and other end fixed complete all as specified and directed. | 3 | Each | |
| 84 | 84 | Supply and fix 15 mm bore bib taps, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. | 4 | Each | |
| 85 | 85 | Supply and fix 15 mm bore pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe complete all as specified and directed. | 2 | Each | |
| 86 | 86 | Supply and fix, 15 mm bore angle valve, cast copper alloy, screwed down high pressure, with crutch or butterfly handles fixed to pipe unions complete all as specified and directed. | 2 | Each | |
| 87 | 87 | Supply & fix soap dish, any type fixed to plugs with chromium plated brass screws complete all as specified and directed. | 1 | Each | |
| 88 | 88 | S&F gun metal globe, or gate valves of size 20mm bore with iron wheel head, screwed at both end for iron pipe and fixed complete all as specified and directed. | 3 | Each | |
| 89 | 89 | S&F gun metal globe, or gate valves of size 25mm bore with iron wheel head, screwed at both end for iron pipe and fixed complete all as specified and directed. | 2 | Each | |
| 90 | 90 | S&F as in repair, stop valve, cast copper alloy, screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions etc complete all as specified and directed. | 4 | Each | |
| 91 | 91 | S&F PVC connections 15mm dia size with PTMT nuts of length 450mm complete all as specified and directed. | 6 | Each | |
| 92 | 92 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fxed to wooden plugs with chromium plated brass screw and cup washer etc. complete all as specified and directed. | 2 | Each | |
| 93 | 93 | S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity hoisted and fixed in position including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe for 20 mm bore pipe all as specified in SSR Part-I 2009 complete all as specified and directed. | 2 | Each Job | |
| 94 | 94 | S&F PVC (SWR) Pipe 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor or fixed to walls with suitable size of clamps & nuts bolt complete all as specified and directed. | 12 | RM | |
| 95 | 95 | S&F PVC (SWR) Pipe 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor or fixed to walls with suitable size of clamps & nuts bolt complete all as specified and directed. | 13 | RM | |
| 96 | 96 | S&F PVC (SWR) bends 75 mm bore any radius complete all as specified and directed. | 6 | Each | |
| 97 | 97 | S&F PVC (SWR) bends 110 mm bore any radius complete all as specified and directed. | 3 | Each | |
| 98 | 98 | S & F for PVC (SWR) 75mm bore floor trap, plain with grating including jointing with solvent cement complete all as specified and direc | 3 | Each | |
| 99 | 99 | S&F PVC waste coupling for 32 mm bore waste pipe in WHB complete all as specified and directed. | 2 | Each | |
| 100 | 100 | S&F PVC waste pipe 32 mm bore for WHB 900 mm long complete all as specified and directed. | 3 | Each | |
| 101 | 101 | S&F chromium plated tubular towel rail 20 mm dia 60 cm long, with brackets complete all as specified and directed. | 2 | Each | |
| 102 | 102 | Material and labour for second class hard wood plain fillets, square, rectangular and triangular in section, wrought, bull nosed, splayed, chamfered or rounded on one edge or face, sectional area exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified and directed. | 45 | RM | |
| 103 | 103 | Material and labour for 2nd class fillets square, rectangular or tringular in section clean sawn screwed with nails exceeding 6 sqcm and not exceeding 13 sqcm complete all as specified and directed. | 25 | RM | |
| 104 | 104 | Material and labour for 2nd class fillets square, rectangular or tringular in section clean sawn screwed with nails exceeding 13 sqcm and not exceeding 25 sqcm complete all as specified and directed. | 15 | RM | |
| 105 | 105 | Material and labour for Second class hardwood in scantlings timber framed and fixed for wrought in section complete all as specified and directed. | 0.2 | Cum | |
| 106 | 106 | Supply and fix second class hard wood 50 mm thick boarding wrought as in purlin, rafter etc fixed with nails complete all as specified and directed. | 5 | Sqm | |
| 107 | 107 | M&L for preparation of new plastered surfaces in ceiling and applying three coats of white wash complete all as specified and directed. | 20 | Sqm | |
| 108 | 108 | Preparation of new or untreated surfaces of wood or wood based surfaces of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. | 10.4 | Sqm | |
| 109 | 109 | Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified and directed. | 47 | Sqm | |
| 110 | 110 | Material and labour for complete removal of existing treatment and applying two coats of exterior wheather coats (as per manufacturers instruction) (Apex Ultima) of M/s Asian make or equivalent of M/s Berger /M/s Shalimar /M/s Neroloc over & incl a coat of wall putty 3mm thick complete all as specified and directed. | 180 | Sqm | |
| 111 | 111 | Material and labour for wall two coats of exterior wheather coats (as per manufacturers instruction) (Apex Ultima) of M/s Asian make or equivalent of M/s Berger /M/s Shalimar /M/s Neroloc over & incl a coat of primer including preparation of new surfaces of walls complete all as specified and directed. | 110 | Sqm | |
| 112 | 112 | M&L preparation and applying two coats of oil emulsion (distemper) over a coat of primer on new plastered surfaces of walls over a coat of wall putty 3 mm thick including preparation of new surfaces complete all as specified and directed. | 350 | Sqm | |
| 113 | 113 | M&L old decorated wood or wood base surface of any description over 10 cm width or girth applying one coat of synthetic enameled paint complete all as specified and directed. | 65 | Sqm | |
| 114 | 114 | Cutting grooves or rebates not exceeding 15 cm girth, and trimming with or without reinforced surfaces complete all as specified and directed. | 6 | RM | |
| 115 | 115 | PART-II (E/M WORKS)\nTaking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. complete all as specified and directed. | 69 | Point | |
| 116 | 116 | M&L for point wiring with single core PVC insulated cable of size 1.5Sqmm nominal area with multi-stranded copper conductor, 1100V grade FRLSH, drawn through and including PVC non metatllic concealed conduit of appropriate size & 1.8mm wall thickness with all fitting and accessories including PVC box of suitable size for mounting switches/sockets etc of suitable size including 1.5Sqmm PVC insulated unsheathed single core copper conductor earth continuity wire connected to common earth dolly with proper colour coding for one light point/fan point/bell point complete all as specified and directed. | 5 | Point | |
| 117 | 117 | M & L for Point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 Sq. mm FRLSH (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with GI sunken/surface boxes with earth dolly and 3mm laminated cover sheet suitable for fixing switches, sockets and regulators including PVC insulated multi stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for one light point/fan point/ bell point with proper colour coding complete all as specified and directed. | 47 | Point | |
| 118 | 118 | All as per item No. 117 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. | 9 | Point | |
| 119 | 119 | All as per item No. 117 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. | 13 | Point | |
| 120 | 120 | All as per item No. 117 above but with multi stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multi stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. | 2 | Point | |
| 121 | 121 | Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed. | 43 | Each | |
| 122 | 122 | Supply and fix switch piano flush type button single pole one way 5 Amps complete all as specified and directed. | 74 | Each | |
| 123 | 123 | Supply and fix socket outlet 3/5 pin 5 Amps flush type complete all as specified and directed. | 22 | Each | |
| 124 | 124 | Supply and fix switch socket outlet 3 pin 5 amp and 3 pin 15 Amps 2 in 1 universal plate complete all as specified and directed. | 2 | Each | |
| 125 | 125 | S & F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts AC supply complete all as specified and directed. | 10 | Each | |
| 126 | 126 | Supply and fix lamp Angular holder insulated body with back plate suitable for batten fittings complete all as specified and directed. | 9 | Each | |
| 127 | 127 | Supply and fix wall mounted LED batten, box type 22 watt with LED tube rod, prewired complete all as specified and directed. \nMake. Havells, Product Code : REGALBATTENT8UPTO1X22WDSBSWH & CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent make of Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd | 30 | Each Job | |
| 128 | 128 | Supply and fix street/bldg security light LED luminaire 20 watt IP 66 LED lamp, driver etc, with all accessories complete all as specified and directed.\nMake:- Havells type 20W LED, Cat No. ENDURAPEARLSL20WLED757SASYTOPCMP or equivalent make of Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd | 4 | Each | |
| 129 | 129 | S & F bulk head fitting LED type comprises of pressure die cast housing acrylic diffuser and frame complete of 10 watt, complete all as specified and directed. \nMake:- Havells Cat No. RUGBYNEOFT10WLED760SSYMBOPC or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/s Surya Roshni Limited/ M/S Jaquar & Company Pvt Ltd/Crompton Greaves | 1 | Each | |
| 130 | 130 | S & F in repair plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and directed.\nMake:- Havells 250mm Crisp Air LX or equivalent make of Crompton Greaves/ Khaitan/Bajaj/Orient | 1 | Each | |
| 131 | 131 | Dismantling old unserviceable main switches, Sheet metal enclosures DB including MCBs etc and keeping in safe custody either for reuse or for disposal including making good to the disturbed surfaces of wall all as directed. | 1 | Each | |
| 132 | 132 | Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. | 1 | Each | |
| 133 | 133 | Supply and fix sheet metal enclosure powder coated single phase DB SPN for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. | 1 | Each | |
| 134 | 134 | Supply and fix sheet metal enclosure powder coated single phase DB SPN for fixing of MCBs, 4 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. | 2 | Each | |
| 135 | 135 | Supply and fix MCB SP 240 volts, 50 Hz capacity 6-32 Amps complete all as specified and directed. | 14 | Each | |
| 136 | 136 | Supply and fix MCB SPN 240 volts, 50 Hz of capacity 40 Amps complete all as specified and directed. | 3 | Each | |
| 137 | 137 | Supply and fix MCB TPN 415 volts, 50 Hz of capacity 63 Amps complete all as specified and directed. | 1 | Each | |
| 138 | 138 | Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed. | 3 | Each Set | |
| 139 | 139 | Supply and laying connecting and testing XLPE insulated PVC sheathed armoured LT electric power UG cable (heavy duty with stranded aluminium conductor) of size 25 sqmm 4 core,1100 volts (Earthed) grade, conforming to IS 7098 (Part-II) laid thorught duct/pipe in trenches etc with cable glands & suitable size of aluminium lugs fixed in repairs complete all as specified and directed. | 50 | RM | |
| 140 | 140 | Supply and laying connecting and testing XLPE insulated PVC sheathed armoured LT electric power UG cable (heavy duty with stranded aluminium conductor) of size 10 sqmm 4 core,1100 volts (Earthed) grade, conforming to IS 7098 (Part-II) laid thorught duct/pipe in trenches etc with cable glands & suitable size of aluminium lugs fixed in repairs complete all as specified and directed. | 50 | RM | |
| 141 | 141 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size complete all as specified and directed. | 50 | RM | |
| 142 | 142 | Material and labour for Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 6 Sq. mm nominal area and drawing into PVC non metallic rigid PVC casing caping heavy duty including one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor as earth wire complete all as specified and as directed.\nNote:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC casing caping will be measured as one unit. | 50 | RM | |
| 143 | 143 | Supply and spread dry sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed.\nNote : Thickness of sand cushion after punning down will be measured and paid. | 6.88 | Cum | |
| 144 | 144 | Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed. | 725 | Each | |
| 145 | 145 | Supply and laying GI tube light grade 40mm bore with fitting laid in trenches of for road crossing for protection of LT underground cables complete all as specified and directed. | 6 | RM | |
| 146 | 146 | Supply and laying GI tube light grade 25mm bore with fitting laid in trenches of for road crossing for protection of LT underground cables complete all as specified and directed. | 12 | RM | |
| 147 | 147 | Material and labour for boring of holes under roads with mechanical arrangement upto 40mm bore without disturbing the top surface of the road for passing the cable across the road complete all as specified and directed. | 6 | RM |
AI Tender Summary
Tender Timeline
Nov 02, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 24, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender