Construction Of Multi Purpose Community Hall , Baliyapur Block Dist . Dhanbad
Tender Value
49.51 Lakhs
Estimated cost
Bid Submission
09 Nov 2020
0 days left
EMD
99100
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baliapur → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Multi Purpose Community Hall , Baliyapur Block Dist . Dhanbad
BOQ
| Name of Work: Construction of Multi Purpose Community Hall, Baliyapur Block Dist: Dhanbad | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth Work excavation in foundation trenches in hard soil vide classification of soil item B and disposal of excavated earth as obtained to a distance up to 50 M including all lifts levelling, ramming the foundation trenches removing roots of trees shurbs all complete as per approved design building specification and direction of e/i. | 135.092 | Cum | |
| 2 | 2 | Providing coarse clean sand filling in the foundation trenches including ramming and watering in layers not exceeding 150 mm thick with all lifts and leads including cost of material -do-all complete job as per specification and direction of e/i. | 26.6529 | Cum | |
| 3 | 3 | Providing designation 75 B brick Flat soling joints filled with local sand including cost of watering taxes royalty all complete job as per building specification and direction of e/i. | 117.58 | Sqm | |
| 4 | 4 | Providing av.150 mm thick dry rammed khoa beaten to 112 mm (compacted wih water )made of well burnt or jhama bricks including ramming properly till compacted thickness achieved curing and carriage of water with all leads making proper slope and blending the top with cement mortar(1:10) all complete as per building specifcation and direction of e/i. | 275.387 | Sqm | |
| 5 | 5 | Providing P.C.C. M-150 With nominal mix of concrete (1:2:4) in foundation for construction of column base with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand F.M 2.5 to 3 including screening ,shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing , all complete job as per specification and direction of e/i. | 7.9811 | Cum | |
| 6 | 6 | Providing R.C.C. M-150 With nominal mix of concrete (1:2:4) for column construction with approved quality of stone chips and sand as above specification, all complete job as per specification and direction of e/i. | 73.09 | Cum | |
| 7 | 7 | Providing R.C.C. M-150 with nominal mix of concrete (1:2:4) for construction of tie bend at plinth level, all complete job as per specification and direction of e/i. | 35.079 | Cum | |
| 8 | 8 | Providing designation 75 B Brick work with (1:6) cement mortar in the super structure -do-all complete job as per specification and direction of e/i. | 152.16 | Cum | |
| 9 | 9 | Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand)stone ware spout. | 8 | each | |
| 10 | 10 | Providing R.C.C. M-150 With nominal mix of concrete(1:2:4) in lintel construction with approved quality of coarse and fine aggregate including all complete job as per specification and direction of e/i. | 2.162 | Cum | |
| 11 | 11 | Providing Av.63 mm thick R.C.C. M-150 with nominal mix of concrete(1:2:4) for construction of chajja with approved quality of fine and coarse aggregate -do-all complete job as per specifiation and direction of e/i. | 13.377 | Sqm | |
| 12 | 12 | Providing R.C.C. M-150 with nominal mix of concrete (1:2:4) for Beam construction -do-all complete job as per specification and direction of e/i. | 21.5514 | Cum | |
| 13 | 13 | Providing R.C.C. M-150 with nominal mix of concrete (1:2:4) for Roof Slab construction, all complete job as per specification and direction of e/i. | 16.4 | Cum | |
| 14 | 14 | Providing T.M.T Steel reinforcement for R.C.C. work with cutting bending fixing in work place as per design drawing grade of steel Fe-500 (only valid fro Sail, Tata ,Jspl, Electro Steel Ltd. And Vizal Steel)-do-all complete job as per specification and direction of e/i. | 15.535 | Mt. | |
| 15 | 15 | Filling in foundation trenches layer not exceeding 150mm thick well watered ,rammed fully compacted and fine dressed with earth obtained after cutting with in a lead of 50 M and lift of 1.5 M. all complete job as per specification and direction of e/i. | 114.398 | Cum | |
| 16 | 16 | Providing P.C.C. M-100 with nominal mix of concrete (1:3:6) in floor construction of column base with approved quality of stone-do-all complete job as per specification and direction of e/i. | 12.7078 | Cum | |
| 17 | 17 | Providing 12 mm thick cement plaster with (1:6) cement mortar with approved quality of sand -do-all complete job as per specification and direction of e/i. | 829.474 | Sqm | |
| 18 | 18 | Providing 6 mm thick cement plaster(1:4) in ceiling with clean coarse sand, all complete job as per specification and direction of e/i. | 343.79 | Sqm | |
| 19 | 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm. | 364.21 | Sqm | |
| 20 | 20 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) . | 6.12 | Sqm | |
| 21 | 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 30.6 | Sqm | |
| 22 | 22 | Supplying fitting and fixing M.S grill made 20X6 mm M.S. flat as per approved design and drawing properly febricated with joints continuous fillet welded and finish smooth ,carrage of grill to work site -do-all complete job as per specification and direction of e/i. | 2326.25 | kg | |
| 23 | 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | 25.039 | Sqm | |
| 24 | 24 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). | 16.972 | Sqm | |
| 25 | 25 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 15.779 | Sqm | |
| 26 | 26 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | 9 | each | |
| 27 | 27 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. | 1 | each | |
| 28 | 28 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern. | 1 | each | |
| 29 | 29 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single15 mm PTMT pillar cock. | 1 | each | |
| 30 | 30 | Providing Two coats of ready mixed paint over a coat of primer one coat of red lead paint approved make over a new steel surface -do-all complete job as per specification and direction of e/i. | 166.77 | Sqm | |
| 31 | 31 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumica stone or fine sand paper applying putty wherever required -do-all complete job as per specification and direction of e/i. | 362.704 | Sqm | |
| 32 | 32 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.CONCEALED WORK, including cutting chases and making good the wall etc.2025 (25 mm OD) pipe. | 20 | Mtr | |
| 33 | 33 | Providing and fixing gun metal non- return valve of approved quality(screwed end) 25 mm nominal bore Horizontal. | 3 | each | |
| 34 | 34 | Providing and placing on terrace (at all floor levels) polyethylene water store tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 1000 | lit | |
| 35 | 35 | Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122mm long, weighing not less than 99 gms. | 12 | each | |
| 36 | 36 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 1.176 | Sqm | |
| 37 | 37 | Providing designation 75B* brick work in C.M.(1:6) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sancl of F.M. 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placrng in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer-in-charge. | 16.7 | Cum | |
| 38 | 38 | Providing precast R.C C.M-150 with nominai mix of (1:2:4) slab of desirecl size with approved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 inclucing curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding tne cost of reinforcement), taxes and royalty, all complete as per buildirig specification rnd direction of E/I. | 1.54 | Cum | |
| 39 | 39 | Supplying G.I. pipe 65mm dia. For making roof truss all complete job as per specification and direction of site engineer. | 48.19 | Mtr | |
| 40 | 40 | Supplying corrugated 6mm thick 1.5 m to 3.05m C.A. sheet for roof covering of shed --do-- all complete job as per specification & directiom of E/I. | 167.308 | Sqm | |
| 41 | 41 | Providing 1.5 mm thick cement plaster(1:4) in ceiling with clean coarse sand & panna, all complete job as per specification and direction of e/i. | 57.23 | Sqm | |
| 42 | 42 | Labour for fitiing and fixing G.C.l. or C.A. sheet roofing in proper slope including the cost of \"J\" or \"L\" hooks, limpet Iand bitumen washers, carriage of sheets to work site, and taxes all complete as per building specification and\ndirection of E/I. | 48.19 | Sqm | |
| 43 | 43 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/m² | 6.7 | m. | |
| 44 | 44 | Providing Two coats of ready mixed paint over a coat of primer one coat of red lead paint approved make over a new steel surface -do-all complete job as per specification and direction of e/i. | 151.9 | Sqm | |
| 45 | 45 | Drilling in all kinds of soil and rock in rural area for in stallation of india mark -II Hand pump with D.I- II rig all completc,including supplying all mateials, labours, tools, drilling rig, air compressor and equipment as wall as fuel, lubricants for making 125mm/115mm dia boring and cost of transporting charges of rig machine and other vehicle up to site of the work as per specification and direction of E/I\n(A) UP to 30mtr. Depth bellow G.I. | 30 | Mtr | |
| 46 | 46 | (B) Beyond 30 Mtr. Up to 90 mts. | 60 | Mtr | |
| 47 | 47 | Supplying all materials labours, equipments for lowering 125mm dia UPVC pipes as casing for protecting the sites from falling during the process of drilling all complete including carriage to work including cost UPVC casing pipe. | 24 | Mtr | |
| 48 | 48 | Supplying labour, cemant and calcium chloride or bentonite solution and equipments for grounding to casing pipe after lowering in the bore etc. all complete as per specification and direction of E/I | 1 | Mtr | |
| 49 | 49 | Supplying all tools equipments and labour and doing washing. Flushing and development of drilled T/W to give clean and clen water all complete as per specification and direction of E/I | 0.5 | Mtr | |
| 50 | 50 | Supplying labor and equipments including 125 mm dia G.I. can and fitting . Fixing over the T/W properly and tanking it out as per direction of E/I | 1 | Mtr | |
| 51 | 51 | Carriage of Material\ni. Cement+Steel Lead 5 km | 88.22 | Mt | |
| 52 | 52 | ii. Sand from Pokharia Bazara Ghat (Barakar) Lead 42 km | 179.94 | Cum | |
| 53 | 53 | iii. Stone Chips Lead 10 km | 142.88 | Cum | |
| 54 | 54 | iv. Stone Metal Lead 10 km | 11.95 | Cum | |
| 55 | 55 | v. Brick Lead 8 km | 89.402 | 0% | |
| 56 | 56 | Electrification Work\nWiring for light/point/Exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductor cable in surface/recessed PVC conducit as required. With piano type switch phenolic laminated sheet MS Box earthing the point PVC insulated copper 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. at required. | 60 | Point | |
| 57 | 57 | wiring for light/power plug wiring with 2x4 sqmm PVC insluated copper kconductor single core cable in surface recessed PVC conduit alongwith 1 No. 4 sqmm FR PVC insluated copper conductor single core cable for loop earthing as required | 100 | M | |
| 58 | 58 | wiring for light/power plug wiring with 4x4 sqmm PVC insluated copper kconductor single core cable in surface recessed PVC conduit alongwith 2 Nos. 4 sqmm FR PVC insluated copper conductor single core cable for loop earthing as required | 20 | M | |
| 59 | 59 | Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/racessed PVC conduit as required.\n1.7.1 :- 2x1.5 sqmm+1x1.5sqmm earth wire | 25 | M | |
| 60 | 60 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required\ni. 1.22.1 : 75x75x50mm | 3 | Each | |
| 61 | 61 | ii. 1.22.6 : 121x173x48mm | 3 | Each | |
| 62 | 62 | iii 1.22.9 : 210x206x48mm | 10 | Each | |
| 63 | 63 | Supplying installation testing and commissioning of surface/recess mounting verticle type 415 volts. Pre-wired TPN MCB distribution board of sheet steel dust procted dully phosphatized and powder painted inclusive of 200 amps tinned copper bus bar for monting MCB's detachable gland/knock out plate and with built in loose wire box and superior make terminal connected up to the terminal connectors for all in coming and out going circuits dully prewired wirth adequate size of FR PVC insulated copper conducted up to the terminal connector/nuteral link and ready for installation of following ways (but without MCB's and incomer) as required\n2.10.1 :- 4 way (8+2) sinle doot, vertical type | 1 | Each | |
| 64 | 64 | Supplying and fixing 6 amps to 32 amps rating 240 Volts 'B' series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing the commissioning etc as required\n2.11.2 :- 40 amps single pole | 5 | Nos. | |
| 65 | 65 | Suipplying and fixing Batten/Angel Holder including connection etc as required. | 40 | Nos. | |
| 66 | 66 | Supplying 300mm Exhaust Fan | 2 | Nos. | |
| 67 | 67 | Supplying LED Bulb 9/10 W | 40 | Nos. | |
| 68 | 68 | Supplying Ceiling Fan (Atomberg) | 6 | Nos. | |
| 69 | 69 | Goods & Service Tax (G.S.T.) - | BI01010001010000000000000515BI0100001150 | 4.37747e+06 | Rs. |
| 70 | 70 | Labour Cess - | BI01010001010000000000000515BI0100001151 | 4.90276e+06 | Rs. |
AI Tender Summary
Tender Timeline
Nov 02, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 13, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender