Special Repair To Roof And Side Wall Of Bldg No . T-7 , T-8 , T-36 Of Jak Rif , T-44 ( Or Living ) Of Jakli , Provn Of 02 Toilets Or Line Mtn Bde And Sentry Post Bimbat And Hema At Dras
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Nov 2020
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dras → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Roof And Side Wall Of Bldg No . T-7 , T-8 , T-36 Of Jak Rif , T-44 ( Or Living ) Of Jakli , Provn Of 02 Toilets Or Line Mtn Bde And Sentry Post Bimbat And Hema At Dras
BOQ
| Name of Work: SPECIAL REP TO ROOF AND SIDE WALL OF BLDG NO. T-7, T-8, T-36 OF JAK RIF, T-44 (OR LIVING) OF JAKLI, PROVN OF 02 TOILETS OR LINE MTN BDE AND SENTRY POST BIMBAT AND HEMA AT DRAS | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in trenches hard and dense soil, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, not exceeding 10 sqm on plan and not exceeding 1.5Mtr in depth & getting out of hard and danse soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line complete all as specified and directed | 14 | Cum | |
| 2 | 2 | Returning filling in (soil) including spreading, leveling, watering and well ramming in layers not exceeding 25mm thick all as specified and directed by Engr-in-Charge | 3 | Cum | |
| 3 | 3 | Removing excavated materials (soil) to a distance not exceeding 50m away from the starting point and depositing where directed at a level not exceeding 1.5m above all as specified and directed by Engr-in-Charge | 11 | Cum | |
| 4 | 4 | Earth filling under floor including spreading, levelling, well ramming, watering in layers n.exc 25 cm thick complete all as directed (earth to be arranged by contractor at his own cost) | 1.5 | Cum | |
| 5 | 5 | M&L for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge. | 10 | Cum | |
| 6 | 6 | M&L for Plain cement concrete 1:4:8 type D-2, (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed by Engineer-in-charge. | 2 | Cum | |
| 7 | 7 | M&L for Hardcore of brken stone or boulder gauge n.exc 63 mm, deposited , spread and levelled in layers n.exc 15 cm thick , watered and rammed to a true surface, complete all as specified and directed by Engr-in-Charge. | 6 | Cum | |
| 8 | 8 | Demolition of stone boulder any description complete all as specified and directed by Engr-in-Charge. | 3 | Cum | |
| 9 | 9 | Demolition of brick or stone/concrete blcok/stone boulder masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engineer-in-charge. | 10 | Cum | |
| 10 | 10 | M&L for Precast cememt concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge. | 24 | Cum | |
| 11 | 11 | M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick masonry, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. | 176 | Sqm | |
| 12 | 12 | M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonry, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. | 97 | Sqm | |
| 13 | 13 | Prepration of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed by Engr-in-Charge. | 177 | Sqm | |
| 14 | 14 | M&L for Preparation of newly plastered surfaces of walls and applying three coats of white wash , complete all as specified and directed by Engr-in-Charge. | 18 | Sqm | |
| 15 | 15 | Prepration of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed by Engr-in-Charge. | 26 | Sqm | |
| 16 | 16 | M&L for providing plain Cement concrete 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) as in coping, bed plates, seismic bands, lintels upto 1.5 m clear span, plinth courses and other similar bands, complete all as specified and directed by Engr-in-Charge. | 0.75 | Cum | |
| 17 | 17 | M&L RCC 1:2:4 type B-0 ( using 12.5 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge. | 1 | Cum | |
| 18 | 18 | Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engineer-in-charge. | 3 | Sqm | |
| 19 | 19 | M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required inclduing cranking bending spirally for hooping ends and binding with and incl mild steel wire (annelaed) not less than 0.90 mm dia or securing with clips. | 70 | Kg | |
| 20 | 20 | All as per Srl item No 19 here in before but 6mm to 8 mm as in stirrups/specers | 50 | Kg | |
| 21 | 21 | Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge. | 28 | Cum | |
| 22 | 22 | S & F non skid ceramic tiles coloured , 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11 sqm, in floor etc, set and jointed in neat cement sturry and pointed in white cement with pigment to match including 10 mm thick screed plaster in CM 1:4 all as specified. | 127 | Sqm | |
| 23 | 23 | M & L for 75 mm thick, plain cement concrete, type C-2, 1:3:6, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge. | 218 | Sqm | |
| 24 | 24 | M & L for 75 mm thick, plain cement concrete, type C-1, 1:3:6, (using 20mm graded stone aggregate) as in plinth protection including finishing surface even and smooth complete all as specified and directed by Engr-in-Charge. | 61 | Sqm | |
| 25 | 25 | M & L for 25 mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base, floor finishes etc making surface even and fair all as per specified and directed. | 120 | Sqm | |
| 26 | 26 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge. | 52 | Sqm | |
| 27 | 27 | Dismantling of timber scantling of any description, 40 sqcm and over in section, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge. | 4 | Cum | |
| 28 | 28 | M&L for Second class soft wood (KAIL), clean sawn timber scantlings as in purlins, rafters, form work etc, complete all as specified and directed by Engr-in-Charge | 2 | Cum | |
| 29 | 29 | Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge. | 605 | Sqm | |
| 30 | 30 | S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L type of J type or crancked hook bolts and washers and washers, in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.. | 595 | Sqm | |
| 31 | 31 | S&F CGI sheeting 0.63mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and staingy flashing (length and girth as fixed) with grade of zinc coating 275. complete all as specified and directed by Engr-in-Charge. | 32 | Sqm | |
| 32 | 32 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screw, complete all as specified and directed by Engr-in-Charge. | 19 | Sqm | |
| 33 | 33 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screw, complete all as specified and directed by Engr-in-Charge. | 2 | Sqm | |
| 34 | 34 | Taking down chowkats or frame shutter(without taking off shutter from the frame) but exc 1.5 sqm but n.exc 4 Sqm each, complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 35 | 35 | Taking down chowkats or frame shutter(without taking off shutter from the frame) not exc 1.5 sqm complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 36 | 36 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs /blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-Charge. | 435 | Sqm | |
| 37 | 37 | Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge. | 930 | RM | |
| 38 | 38 | M&L for Plain fillets of second class soft wood (KAIL) sectional area exceeding 13 Sqcm and not exceeding 25 Sqcm, square, rectangular or triangular in section, clean sawn, secured with nails, complete all as specified and directed by Engr-in-Charge. | 920 | RM | |
| 39 | 39 | S & F 9mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative lamination and other side balancing white lamination fixed with nails to timber frame work, complete all as specified and directed. | 200 | Sqm | |
| 40 | 40 | S & F 12mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative lamination and other side balancing white lamination fixed with nails to timber frame work, complete all as specified and directed | 235 | Sqm | |
| 41 | 41 | M&L for 2nd Class soft wood moulding as in cornicses, picture, rails and the like n.exc.6 sq cm., complete all as specified and directed by Engr-in-Charge | 40 | RM | |
| 42 | 42 | S&F Second class soft wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge. | 0.35 | Cum | |
| 43 | 43 | S&F Second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge. | 11.5 | Sqm | |
| 44 | 44 | S&F 30 mm thick 2nd class soft wood skeleton shutters, divided into quare with plain chamfered or rounded mitrerd and rebated sash bars for windows any numbers, size of stiles and rail as specified in SSR (2009) Part-I section 8 clause 8.24 (b), complete all as specified and directed by Engr-in-Charge. | 1.5 | Sqm | |
| 45 | 45 | Supply and fixing 100 mm long mild steel butt hinges medium weight cold rolled , complete all as specified and directed by Engr-in-Charge. | 18 | Each | |
| 46 | 46 | Supply and fixing 75 mm long mild steel butt hinges medium weight cold rolled , complete all as specified and directed by Engr-in-Charge. | 12 | Each | |
| 47 | 47 | S & F 200 mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 48 | 48 | S & F 100 mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-Charge. | 12 | Each | |
| 49 | 49 | S & F 150 mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-Charge. | 8 | Each | |
| 50 | 50 | S & F 150mm long mild steel handles, cast type med weight complete all as specified and directed by Engr-in-Charge. | 12 | Each | |
| 51 | 51 | S & F 100mm long mild steel handles, cast type med weight complete all as specified and directed by Engr-in-Charge. | 6 | Each | |
| 52 | 52 | S&F Mild steel sliding door bolt 300 mm long plate type slove enamelled blak wioth bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engr-in-Charge. | 8 | Each | |
| 53 | 53 | Hacking out old broken glass (any thickness, size, quality or description) from wooden, aluminium steel frames glazed with putty or fixed with beads , complete all as specified and directed by Engr-in-Charge. | 17 | Sqm | |
| 54 | 54 | S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-Charge. | 17 | Sqm | |
| 55 | 55 | S&F Rolled mild steel in framed clading and like fix with single cleats and connecting plates (beams, tee, angle channel or flat sections) confirming to Fe 410-W (Gde-E-250) quality A, complete all as specified and directed by Engr-in-Charge. | 3310 | Kg | |
| 56 | 56 | S&F Rolled mild steel in roof trusses (framed) purlins, crane gantries, rails and fastenings and heavy brackets freming (beams, tee, angle channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde-E-250) quality A, complete all as specified and directed by Engr-in-Charge. | 170 | Kg | |
| 57 | 57 | Dismantling of structural steel work including gate/door etc but excluding trusses complete all as specified and directed by Engr-in-Charge. | 13.5 | Quintal | |
| 58 | 58 | Material and labour for kota stone flooring 18-20mm thick over cement screed bed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete laid over and including 20 mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-Charge. | 90 | Sqm | |
| 59 | 59 | M&L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge. | 29 | Sqm | |
| 60 | 60 | M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. | 320 | Sqm | |
| 61 | 61 | Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, over a coat of red oxide complete all as specified and directed by Engr-in-Charge. | 92 | Sqm | |
| 62 | 62 | Preparation of old steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. | 100 | Sqm | |
| 63 | 63 | S & F vitreous china water closet (squatt pan) orrisa pattern 630x450 mm size pan white with front or back inlet with intergral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe, complete all as specified and directed by Engr-in-Charge. | 4 | Each | |
| 64 | 64 | S&F PVC valveless syphonic action type flushing cystern 10 ltr capacity low level white inlet ball valve float and handle including bracket, complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 65 | 65 | S&F for Vitreous China bowl urinal flat back, size of 465x355x265mm, including fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and incl 60 mm long brass screws, pointing aournd urinal and provision of waste pipe PVC suitable for urinal pot, complete all as specified and directed by Engr-in-Charge. | 1 | Each | |
| 66 | 66 | S & F stop valves suitable for 15 mm bore iron pipe, cast copper alloy, chromium plated, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions complete all as specified and directed. | 3 | Each | |
| 67 | 67 | S&F PVC SWR P trap of 110 mm/100 mm | 3 | Each | |
| 68 | 68 | S&F PVC (SWR) junction (Single T) equal or unequal of 110 mm dia | 3 | Each | |
| 69 | 69 | S&F PVC pipe waste pipe 32mm dia and 75cm long incl waste coupling fixed to waste coupling. | 1 | Each | |
| 70 | 70 | M&L for Precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in manhole cover slab and set in Cement Mortar (1:4) , complete all as specified and directed by Engineer-in-charge. | 0.25 | Cum | |
| 71 | 71 | S&F 110mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor , complete all as specified and directed by Engineer-in-charge. | 20 | RM | |
| 72 | 72 | Supply and fixing Bib taps,15 mm bore,fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule, complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 73 | 73 | Supply and Fixing 15 mm dia GI tube medium grade galvanised with all fittings and fixed to walls and ceilling or laid in floors, complete all as specified and directed by Engr-in-Charge. | 2 | Rm | |
| 74 | 74 | Supply and fixing 20mm dia GI tube medium grade galvanised, with all fitting and fixed complete laid in trenches, complete all as specified and directed by Engr-in-Charge. | 5 | Rm | |
| 75 | 75 | Supply and fixing 20mm dia Gun metal globe or gate valve iron wheel head, screwed both ends, heavy duty ISI marked, complete all as specified and directed by Engr-in-Charge. | 1 | Each | |
| 76 | 76 | PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed by Engr-in-Charge. | 3 | Each | |
| 77 | 77 | Supply and fixing 500 Ltr capacity Rotational moulded HDPE water storage tanks (Cylindrical vertical closed top), double wall construction, hoisted and fixed in position or placed in position inside or outside the building, connecting up pipes and securing access covers, complete all as specified and directed by Engr-in-Charge. | 1 | Each | |
| 78 | 78 | Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc. | 95 | Per \nPoint | |
| 79 | 79 | M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete. | 75 | Per \nPoint | |
| 80 | 80 | All as per Srl item No 02 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board. | 10 | Per \nPoint | |
| 81 | 81 | S&F Switch piano flush type 5 Amps, single pole one way. | 63 | Each | |
| 82 | 82 | S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type. | 38 | Each | |
| 83 | 83 | S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type. | 4 | Each | |
| 84 | 84 | S&F Lamp holder, insulated body with back plate suitable for batten fittings | 6 | Each | |
| 85 | 85 | S&F Ceiling rose surface bakelite 65x50mm, two to three terminals. | 57 | Each | |
| 86 | 86 | S&F Isolater SPN, 40 Amp, 240V, 10 KA. | 7 | Each | |
| 87 | 87 | S&F MCB, single pole, 5 to 32 Amp, 240V, 10KA. | 30 | Each | |
| 88 | 88 | S&F Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed. | 5 | Each | |
| 89 | 89 | S&F Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 2 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed. | 2 | Each | |
| 90 | 90 | M&L for exhaust fan complete with metallic blade , heavy duty , mortor 240 V single phase of size 380 mm sweep incl making hole etc and fixation with 04 nos fully threaded bolt grouted in wall , nut and proding , wire mesh from out side complete with connection, complete all as specified. | 1 | Each | |
| 91 | 91 | S&F Rectangular PVC block of size 30 x 25 x 5 cm depth, closed recessed. | 2 | Each | |
| 92 | 92 | S&F LED ultra slim LED light fittings, environment freindly, energy efficient ready to use pack 18 Watt 6000 K make: Havells cat part No LED LHEXBTP7UN1W018 or equivalent approved make Philips/Bajaj/Suska complete all as specified. | 56 | Each | |
| 93 | 93 | Sub main wiring with 2x 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 1x 4 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified. | 53 | RM | |
| 94 | 94 | S&F 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified. | 60 | RM | |
| 95 | 95 | Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6mm thick buried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron protected by provision of G I light grade pipe 40mm bore including provision of concrete pit in PCC 1:2:4 type B1 using 20mm grade stone aggregate with 40mm thick cover of RCC 1:2:4 reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs two number and with 6mm dia MS bar handle made to shape and GI medium grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 40mmx8mm flat iron with fixing arrangement funnel wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50M all as per electric plate No 5 of SSR Part-I conected to earth test point as specified or indicated including testing on completion. | 2 | Per \nSet | |
| 96 | 96 | M&L House Service bracket (hook type) complete with 3.0 m long G.I pipe 40 mm dia (medium grade), two numbers 90° bends, M.S hook and stay including taking down the existing unserviceable bracket.\nNOTE :- The unit rate shall to include for :-\n(a) Cutting holes in walls etc. of any description, grouting rag bolts and making good with cement mortar 1:3 including making good finishing to match the existing work and removing rubbish off the premises as directed (in case of bracket being fixed to masonry wall).\n(b) G.I pipe house service bracket hook type fabricated out of 3.0m long screwed G.I pipe of medium grade and comprising of two number 90° bend (pipe dia) screwed tight to the top ends of the service vertical limb, the two ends of the service provided with two number of turned spit tight fit, well seasoned teak wood bushing and the bracket fixed plumb vertical against the wall with two number flat iron clamps (fabricated out of 50 x 6mm flat iron with 4 No. 16 mm dia ragged bolts of appropriate size with screwed ends, tightened with 16 mm dia nuts with 6 mm thick washer against the clamp tightening collar. | 1 | Per \nSet | |
| 97 | 97 | Note:- Deduction for amount of Rs. 62,972.00 as listed in Schedule A Part-II (Schedule of credit) shall be made while awarding of contract. |
AI Tender Summary
Tender Timeline
Oct 29, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 09, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender