Special Rep To Bldg No . T-15 , T-16 Of Fd Hosp , T-13 Of Fd Regt And T- 116 Of Med Regt ( Jco/Or Living Accn Etc ) At Dras
Tender Value
23 Lakhs
Estimated cost
Bid Submission
07 Nov 2020
0 days left
EMD
46000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dras → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Rep To Bldg No . T-15 , T-16 Of Fd Hosp , T-13 Of Fd Regt And T- 116 Of Med Regt ( Jco/Or Living Accn Etc ) At Dras
BOQ
| Name of Work: SPECIAL REP TO BLDG NO. T-15, T-16 OF FD HOSP, T-13 OF FD REGT AND T- 116 OF MED REGT (JCO/OR LIVING ACCN ETC) AT DRAS | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge. . | 24 | Cum | |
| 2 | 2 | M & L for 50 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in sub base, floor finishes etc making surface even and fair all as per specified and directed. | 48 | Sqm | |
| 3 | 3 | Material and labour for kota stone flooring 18-20mm thick over cement screed bed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete laid over and including 20 mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-Charge. | 48 | Sqm | |
| 4 | 4 | M & L for 25 mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base, floor finishes etc making surface even and fair all as per specified and directed. | 274 | Sqm | |
| 5 | 5 | S & F non skid ceramic tiles coloured , 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11 sqm, in floor etc, set and jointed in neat cement sturry and pointed in white cement with pigment to match including 10 mm thick screed plaster in CM 1:4 all as specified. | 254 | Sqm | |
| 6 | 6 | Taking down chowkats or frame shutter(without taking off shutter from the frame) not exc 1.5 sqm complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 7 | 7 | Taking down chowkats or frame shutter(without taking off shutter from the frame) but exc 1.5 sqm but n.exc 4 Sqm each, complete all as specified and directed by Engr-in-Charge. | 8 | Each | |
| 8 | 8 | S&F Second class soft wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge. | 0.41 | Cum | |
| 9 | 9 | S&F Second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge. | 20.3 | Sqm | |
| 10 | 10 | Supply and fixing 100 mm long mild steel butt hinges medium weight cold rolled , complete all as specified and directed by Engr-in-Charge. | 30 | Each | |
| 11 | 11 | S & F 150mm long Aluminium handles, cast aluminium alloy complete all as specified and directed by Engr-in-Charge. | 12 | Each | |
| 12 | 12 | S & F 150 mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-Charge. | 14 | Each | |
| 13 | 13 | S & F 200 mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-Charge. | 4 | Each | |
| 14 | 14 | S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium allow, complete all as specified and directed by Engr-in-Charge. | 6 | Each | |
| 15 | 15 | S&F Mild steel sliding door bolt 300 mm long plate type slove enamelled blak wioth bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engr-in-Charge. | 8 | Each | |
| 16 | 16 | M&L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge. | 322 | Sqm | |
| 17 | 17 | M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. | 50 | Sqm | |
| 18 | 18 | Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge. | 362 | Sqm | |
| 19 | 19 | Dismantling of timber scantling of any description, 40 sqcm and over in section, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge. | 0.6 | Cum | |
| 20 | 20 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screw, complete all as specified and directed by Engr-in-Charge. | 140 | Sqm | |
| 21 | 21 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screw, complete all as specified and directed by Engr-in-Charge. | 9 | Sqm | |
| 22 | 22 | S & F fibre glass reinforced translucent corruggated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screw. | 12 | Sqm | |
| 23 | 23 | S&F Rolled mild steel in roof trusses (framed) purlins, crane gantries, rails and fastenings and heavy brackets freming (beams, tee, angle channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde-E-250) quality A, complete all as specified and directed by Engr-in-Charge. | 324 | Kg | |
| 24 | 24 | Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, over a coat of red oxide complete all as specified and directed by Engr-in-Charge. | 234 | Sqm | |
| 25 | 25 | Preparation of old steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. | 502 | Sqm | |
| 26 | 26 | S & F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with intergral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe, complete all as specified and directed by Engr-in-Charge. | 4 | Each | |
| 27 | 27 | S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-Charge. | 16 | Sqm | |
| 28 | 28 | Hacking out old broken glass (any thickness, size, quality or description) from wooden, aluminium steel frames glazed with putty or fixed with beads , complete all as specified and directed by Engr-in-Charge. | 23 | Sqm | |
| 29 | 29 | Demolition of brick or stone/concrete blcok/stone boulder masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engineer-in-charge. | 2 | Cum | |
| 30 | 30 | M&L for Precast cememt concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge. | 2 | Cum | |
| 31 | 31 | M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonry, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. | 70 | Sqm | |
| 32 | 32 | Prepration of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed by Engr-in-Charge. | 40 | Sqm | |
| 33 | 33 | Prepration of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed by Engr-in-Charge. | 30 | Sqm | |
| 34 | 34 | M & L for 75 mm thick, plain cement concrete, type C-2, 1:3:6, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge. | 150 | Sqm | |
| 35 | 35 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge. | 70 | Sqm | |
| 36 | 36 | S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L type of J type or crancked hook bolts and washers and washers, in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.. | 200 | Sqm | |
| 37 | 37 | S&F CGI sheeting 0.63mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and staingy flashing (length and girth as fixed) with grade of zinc coating 275. complete all as specified and directed by Engr-in-Charge. | 10 | Sqm | |
| 38 | 38 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs /blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-Charge. | 495 | Sqm | |
| 39 | 39 | Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge. | 900 | RM | |
| 40 | 40 | M&L for Plain fillets of second class soft wood (KAIL) sectional area exceeding 13 Sqcm and not exceeding 25 Sqcm, square, rectangular or triangular in section, clean sawn, secured with nails, complete all as specified and directed by Engr-in-Charge. | 850 | RM | |
| 41 | 41 | S & F 9mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative lamination and other side balancing white lamination fixed with nails to timber frame work, complete all as specified and directed. | 120 | Sqm | |
| 42 | 42 | S & F 12mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative lamination and other side balancing white lamination fixed with nails to timber frame work, complete all as specified and directed | 120 | Sqm | |
| 43 | 43 | M&L for 12 mm thick ply wood (5 Nos of ply) grade BWR, type BB, fixed with screws, to timber frame work, as in wall/ceiling/partition, flat or sloping, complete all as specified and directed by Engr-in-Charge. | 130 | Sqm | |
| 44 | 44 | M&L for 6 mm thick ply wood (5 Nos of ply) grade BWR, type BB, fixed with screws, to timber frame work, as in wall/ceiling/partition, flat or sloping, complete all as specified and directed by Engr-in-Charge. | 120 | Sqm | |
| 45 | 45 | M&L for 2nd Class soft wood moulding as in cornicses, picture, rails and the like n.exc.6 sq cm., complete all as specified and directed by Engr-in-Charge | 130 | RM | |
| 46 | 46 | Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc. | 110 | Per \nPoint | |
| 47 | 47 | M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete. | 100 | Per \nPoint | |
| 48 | 48 | All as per Srl item No 47 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board. | 10 | Per \nPoint | |
| 49 | 49 | S&F Switch piano flush type 5 Amps, single pole one way. | 62 | Each | |
| 50 | 50 | S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type. | 38 | Each | |
| 51 | 51 | S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type. | 10 | Each | |
| 52 | 52 | S&F Lamp holder, insulated body with back plate suitable for batten fittings | 6 | Each | |
| 53 | 53 | S&F Ceiling rose surface bakelite 65x50mm, two to three terminals. | 56 | Each | |
| 54 | 54 | S&F Isolater SPN, 40 Amp, 240V, 10 KA. | 6 | Each | |
| 55 | 55 | S&F MCB, single pole, 5 to 32 Amp, 240V, 10KA. | 32 | Each | |
| 56 | 56 | S&F Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed. | 4 | Each | |
| 57 | 57 | S&F LED ultra slim LED light fittings, environment freindly, energy efficient ready to use pack 18 Watt 6000 K make: Havells cat part No LED LHEXBTP7UN1W018 or equivalent approved make Philips/Bajaj/Suska complete all as specified. | 56 | Each | |
| 58 | 58 | S&F LED bulb 9 watt Make- Havells/Philips/Bajaj/Suska | 6 | Each | |
| 59 | 59 | Sub main wiring with two single core 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 4 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified. | 40 | RM | |
| 60 | 60 | S&F 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified. | 130 | RM | |
| 61 | 61 | Note:- Deduction for amount of Rs. 55,939.00 as listed in Schedule A Part-II (Schedule of credit) shall be made while awarding of contract. |
AI Tender Summary
Tender Timeline
Oct 29, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 09, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender