Military Engineer Services-MES has published Repair To Flooring , Plasting , Tilling And Sunken Floor Under Area In Army Area Jodhpur. Submission Date for this Tender is 18-11-2020. Civil Work Tenders in GE(Army) Central Rajasthan. Bidders can get complete Tender details and download the document.
Name of Work :Repair to Flooring, plasting, tilling & Sunken floor under area in Army area Jodhpur | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing),removing servicable tiles to store and rubbish off the premises. | 180 | Sqm | |
2 | 2 | M&L for Glazed ceramic colour tiles in vertical surface 450X300X7-8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering as in backing coat of CM 1:4 all as directed | 100 | Sqm | |
3 | 3 | M&L for Glazed ceramic colour tiles (Satin finish) in vertical surface 1000X200X7 to 10 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering as in backing coat of CM 1:4 all as directed. | 50 | Sqm | |
4 | 4 | M&L for Glazed ceramic colour tiles in vertical surface 600X300X7 to 10 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering as in backing coat of CM 1:4 all as directed. | 30 | Sqm | |
5 | 5 | Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) & removing rubbish out side MD land all as directed by Engineer-in-charge. | 5 | Cum | |
6 | 6 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floors & finished the surface even & fair without using extra cement all as specified. | 100 | Sqm | |
7 | 7 | M&L for double charged light coloured Virified Ceramic tiles 9-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6. | 100 | Sqm | |
8 | 8 | All as per item No 07 above but as in sikirting/steps etc over 10mm thick rendering as in backing coat of CM 1:4 all as directed | 40 | Sqm | |
9 | 9 | M&L for Vitrified coloured jointless tiles 9-10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6. | 150 | Sqm | |
10 | 10 | All as per item No 09 above but as in sikirting/steps etc over 10mm thick rendering as in backing coat of CM 1:4 all as directed | 40 | Sqm | |
11 | 11 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.06sqm but not exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over and including 15mm thick screed bed in CM 1:6 all as specified. | 50 | Sqm | |
12 | 12 | All as per item No 11 above but in skirting, steps etc in vertical surfaces including 15mm thick rendering in CM 1:6 as in backing coat all as specified. | 18 | Sqm | |
13 | 13 | M&L for non skid ceramic coloured tiles 7-8 mm area of each tile exc 0.18sqm but not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over and including 15mm thick screed bed in CM 1:6 all as directed | 100 | Sqm | |
14 | 14 | All as per item No 13 above but as in skirting, steps etc in vertical surfaces including 15mm thick rendering in CM 1:6 as in backing coat all as specified. | 16 | Sqm | |
15 | 15 | M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & 15 mm thick screed bed in CM 1:6 complete | 80 | Sqm | |
16 | 16 | M&L Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed 10mm thick in CM 1:4. | 8 | Sqm | |
17 | 17 | M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair all as specified. | 200 | Sqm | |
18 | 18 | M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface. | 3.5 | Cum | |
19 | 19 | M & L for 60mm thick inter locking cement concrete (lacquer finish) mixed colour factory made paver blocks M-30 designation (compressive strength) laid over 25 mm thick sand cushion to maintain the slope including compaction with 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base etc.(sand cushioning shall be measured and paid separately) | 60 | Sqm | |
20 | 20 | M&L for even spreading of 25mm thick layer of sand cushioning all as specified and directed | 2.5 | Cum | |
21 | 21 | M&L for PCC 50 mm thick type C1 1:3:6 (20 mm graded stone aggregate) laid in alternative as in plinth protection including finished the surface even & fair without using extra cement& filling the joints with mastic filling i.e one part of bitumen 85/25&3 parts of sand by weight. | 150 | Sq. M | |
22 | 22 | S&F chequered cement concrete (lacquer finish) tiles 30cmx30cmx20-22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors including a screed bed or bedding layer of 15mm thick in CM 1:4 for laying floor finishes | 50 | Sqm | |
23 | 23 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar | 5 | X Sqm | |
24 | 24 | M&L for 16-18 mm thick Granite stone work (of any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. | 30 | Sqm | |
25 | 25 | M&L for granite of any type slab 16-18mm thick machine cut bedded and pointed with grey cememt slurry and pointed with white cement with admixture of gigment to match the shade of granite stone including nosing, grinding and plishing complte all as specified and directed | 20 | Sqm | |
26 | 26 | M&L for 35-50mm thick Machine cut Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete | 80 | Sqm | |
27 | 27 | M& L for machine cut stone lintels hammer dressed on face and sffits, hoisted, set and pointed in cement mortar 1:6 complete, n exc 3m in length. | 0.2 | Cum | |
28 | 28 | M&L for two layer water resistant seal coat on stone slab to reduce the absorption capacity complete. | 160 | Sqm | |
29 | 29 | Taking down cement plaster on brick or stone wall or concrete wall or Ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. | 800 | Sqm | |
30 | 30 | M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:6 & finished the surface even & fair without using extra cement all as specified. | 650 | Sqm | |
31 | 31 | M&L for rendering 5 mm thick on fair faces faces of brick work or concrete surfaces of ceilings in cement plaster 1:3 & finished the surface even & fair without using extra cement all as specified. | 150 | Sqm | |
32 | 32 | M&L prep of newly plastered surfaces or surfaces from which existing treatment has been completely removed & applying two of birla /JK wall putty , sand papering the same & making good to depressions if any to obtain totally smooth surfaces ,complete all as specified and as directed. | 500 | Sqm | |
33 | 33 | M&L for preparing new plastered surfaces and applying two coats of oil bound distemper over a coat of primer including preparatory to distempering on surfaces of walls all as directed by Engineer-in-Charge. | 400 | Sqm | |
34 | 34 | M&L for preparing new plastered surfaces and applying two coats of oil bound distemper over a coat of primer including preparatory to distempering on surfaces of ceiling all as directed by Engineer-in-Charge. | 100 | Sqm | |
35 | 35 | Preparing newly plastered surfaces of walls and applying three coats of white wash. | 50 | Sqm | |
36 | 36 | Preparing newly plastered surfaces of ceilings and applying three coats of white wash. | 50 | Sqm | |
37 | 37 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ springs clips and providing and fixing new ones. | 40 | Sqm | |
38 | 38 | S & F 3.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sq. M in each pane | 10 | Sqm | |
39 | 39 | S & F 3.0 mm thick figured glass,pin head type in squares n exc 0.5 Sq. M in each pane | 5 | Sqm | |
40 | 40 | S & F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm. in each pane | 5 | Sqm | |
41 | 41 | S&F 5.50 mm thick Sheet glass, ordinary quality and glazing with aluminium beading and size n exc 0.5 sq. m in each pane as specified and directed | 5 | Sqm | |
42 | 42 | S&F 5.50 mm thick Sheet glass, ordinary quality and glazing with aluminium beading and size exc 0.5 sq. m in each pane as specified and directed | 15 | Sqm | |
43 | 43 | S&F Solar control film 25 micron reflective type (greater sun control or equivalent) | 20 | Sqm | |
44 | 44 | Taking down Chowkats or frames area not exceeding 1.5 Sqm each (Without taking off shutters from the frames) | 13 | Each | |
45 | 45 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified & directed. | 14 | Rm | |
46 | 46 | S&F Factory made solid panel pvc door shtter 30mm thick style consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and all as directed by Engr-in-Charge. | 5 | Sqm | |
47 | 47 | S&F solid PVC door frame wooden/decorative finishof size 50mm x47mm made out of 5mm wooden/decorative finish PVC sheet reinforced with MS square tube all as specified & directed. | 45 | Rm | |
48 | 48 | S&F Wooden/decorative finish Factory made solid panel pvc door shtter 30mm thick style consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded Wooden/decorative finish PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wooden/decorative finish PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail; panelling of Wooden/decorative finish PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable matching PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and all as directed by Engr-in-Charge. | 16 | Sqm | |
49 | 49 | Taking down Chowkats or framesarea exc 1.5 sq. m but n exc 4 sq m each (Without taking off shutters from the frames) | 20 | Each | |
50 | 50 | Taking down shutters of any description area exceeding 1 Sq. M and n.exc 2 Sqm each. | 5 | Each | |
51 | 51 | M&L for New framed work as in doors or gates of angle(45x45x5) mm or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete | 150 | Kg | |
52 | 52 | S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel all as directed by Engineer-in-Charge | 10 | Sqm | |
53 | 53 | S & F 35 mm thick factory made Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. | 10 | Sqm | |
54 | 54 | S & F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples | 8 | Sqm | |
55 | 55 | M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified. | 40 | Sqm | |
56 | 56 | M&L for Ist Class Hardwood Teakwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed | 0.2 | Cum | |
57 | 57 | M&L for prep of new wooden surfaces nexc 10 cm width or girth & applying two coats of French polish over a coat of sizing & filler coat . | 2 | 10 Rm | |
58 | 58 | M&L for 40-45 mm thick first class hardwood Teak wood panelled door (any number of panels) divided into a number of squares & raised panels of wood with carved patterns & bevelled /chamfered margins on each side including Antique type Brass Hinges (heavy duty), Brass sliding door bolt/other locking arrangement and brass handles and other accessories of suitable size and pattern approved by GE complete. | 10 | Sqm | |
59 | 59 | M&L for prep of new wooden surfaces exc 10 cm width or girth & applying two coats of French polish over a coat of sizing & filler coat . | 26 | Sqm | |
60 | 60 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr in Charge | 100 | Kg | |
61 | 61 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified | 40 | Sqm | |
62 | 62 | M&L for Powder coated aluminium windows using , aluminium section weighing 0.55 kg/ m incl ncessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified | 20 | Sqm | |
63 | 63 | M&L for Powder Coated aluminium door shutters using, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. | 10 | Sqm | |
64 | 64 | M&L for powder coating of any colour (Thickness or powder coating not less than 50 micron) at aluminium sections complete. | 30 | Sqm | |
65 | 65 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels with decorative veeneers on both faces complete fixed to frames . | 10 | Sqm | |
66 | 66 | M&L for Pressed steel frames for doors size 105x60mm \nwith one rebate including necessary fixing lugs, hinges, lock strike plate, etc omplete, as specified,supplied and fixed | 25 | RM | |
67 | 67 | S&F, 300 mm long MS sliding door boltS, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed. | 5 | Each | |
68 | 68 | S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed. | 2 | Each | |
69 | 69 | S&F in repair 250mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed | 2 | Each | |
70 | 70 | S&F 125 mm size Extruded aluminium ally handles, fabricated type., anodised complete. | 30 | Each | |
71 | 71 | S&F in reapir 125 mm size Extruded brass handles, fabricated type polished | 20 | Each | |
72 | 72 | S&F 150 mm size mild steel pressed handles, oval type, stove enamelled black complete. | 30 | Each | |
73 | 73 | S&F 100 mm long anodised aluminium barrel tower bolts of extruded section and fixed. | 40 | Each | |
74 | 74 | S&F 100 mm long Brass barrel tower bolts, with barrel of extruded section and rolled or cast bolts and fixed | 20 | Each | |
75 | 75 | S&F in repairs Floor door stopper of brass body and tongue with hard drawn steel spring 140mm long | 10 | Each | |
76 | 76 | S&F for floor spring double action hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stationless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed by Engineer-in-charge.Make: Doorset or Equivalent | 2 | Each | |
77 | 77 | S&Fin repair Door closer hydraulically regulated designation No 1 universal type suitable for door shutter up to 1.00m in width and of weight not more than 35 Kg and fixed aluminium (Extructed section body). Make: Doorset or Equivalent | 2 | Each | |
78 | 78 | S&F for 75mm mortice lock for 4 levers | 2 | Each | |
79 | 79 | S&F in repair 150 mm long mild steel helical door spring ,stove enamelled black, if, required welding complete as directed by Engr-in-Charge. | 5 | Each | |
80 | 80 | S&F Butt hinges 100 mm including necessary welding if required all as directed by Engr- in -Charge. | 15 | Each | |
81 | 81 | S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded | 3 | Sqm | |
82 | 82 | All as per item No 81 above but without glazing bars | 3 | Sqm | |
83 | 83 | S&F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 410 - O or Fe 310 - O | 30 | Kg | |
84 | 84 | S & F Sheet Glass Shelf Assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long | 3 | Each | |
85 | 85 | M&L for prep of old wooden surfaces exc 10 cm width or girth & applying two coats of French polish over a coat of sizing & filler coat . | 20 | Sqm | |
86 | 86 | M&L for preparation of old wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified. | 28 | Sqm | |
87 | 87 | S & F in repairs Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples | 30 | Sqm | |
88 | 88 | Resecuring or easing,cleaning,greasing,minor repair & adjusting of shutters of any description area exc 1 sqm and n exc 2 sqm each.(supply of Rubber beading to aluminium section shall be measured and paid seperately) | 30 | Each | |
89 | 89 | Resecuring or easing,cleaning,greasing,minor repair & adjusting of Shutters of any description area n exc 1 sqm each(supply of Rubber beading to aluminium section shall be measured and paid seperately) | 60 | Each | |
90 | 90 | Supply only rubber beading complete all as specified. | 40 | Rm | |
91 | 91 | Aluminium grills for windows all as specified and directed by Engr-in-charge. | 10 | Sqm | |
92 | 92 | S & F Butt hinges Aluminum 100 mm type C21 complete all as specified and as directed | 30 | Each | |
93 | 93 | S&F solid PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet all as per sample inclusive of solvent cement & fixing at site on PVC framed fillets all as specified & directed complete | 100 | Sqm | |
94 | 94 | S&F 5 mm thick PVC sheet fillets of width 35 mm for wall panelling incl of fixing to walls to make frame for fixing the PVC sheet wall panelling complete all as directed & specified. | 100 | RM | |
95 | 95 | Dismantling boarding, wooden partitions any description, fixed in any position with screws | 100 | sqm | |
96 | 96 | M&L for 18-19 mm Prelaminatd particle board, e x t e r i o r grade,grade 1 quality, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws on walls as wall panelling including spacer used to hold panelleling. | 50 | Sqm | |
97 | 97 | M&L for 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete | 50 | Sqm | |
98 | 98 | M&L for 0.90 mm thick Decorative laminates type I, or surface finish, colour and pattern as approved by GE. | 50 | Sqm | |
99 | 99 | S& F Continuous (piano) hinges, mild steel, bright polished electrogalvanised width of flap when open 30 mm | 30 | RM | |
100 | 100 | M & L Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads, sectional area Exc 3 & n. exc 6 sq.cm | 10 | RM | |
101 | 101 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished. | 4 | each | |
102 | 102 | Providing, cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed | 1 | cum | |
103 | 103 | S&F frosted glass 5.5mm thick with supporting stud to sheet glass complete all as specified and directed by Engineer in charge | 3 | Sq. M | |
104 | 104 | S&F Vitreous China urinals, bowl type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals, (Minimum weight 15mm-50gms) with Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms). | 2 | Each | |
105 | 105 | S&F Demolition Reinforced brickwork in suspended slabs, beams, lintels, etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) | 10 | Cum | |
106 | 106 | M&L for Reinforced cement concrete (Design mix) in M-30 (20 mm graded stone aggregates) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like | 10 | Cum | |
107 | 107 | S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips | 100 | Kg | |
108 | 108 | S&F Mild steel TMT bars 6-8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips | 100 | Kg | |
109 | 109 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips | 800 | Kg | |
110 | 110 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat/ curved surfaces complete | 67 | Sqm | |
111 | 111 | M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide | 50 | Rm | |
112 | 112 | Dismantling boarding, frame work any description, fixed any position with screws | 300 | Sqm | |
113 | 113 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions | 300 | Sqm | |
114 | 114 | S&F Anodised aluminium snap grid frame work (Size of grid 605x605mm) for false ceiling including suspended from ceiling/wall all as specified | 300 | Sqm | |
115 | 115 | Taking down and refixing false ceiling boarding, frame work any description for cleaning in any position with screws | 300 | Sqm | |
116 | 116 | Demolition Brickwork of stone/boulder masonry, but built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles | 20 | Cum | |
117 | 117 | M&L Squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar(1:6) | 18 | Cum | |
118 | 118 | All as per item 117 above but except stones. | 2 | Cum | |
119 | 119 | Extra over to stone walling for hammer dressing to face stones and dressing of the face beds & joints as specified of squared rubble walling regular coursed, Jodhpur type, with maximum depression of face from straight edge held against the dressed surface n.exc. 20mm. | 40 | Sqm | |
120 | 120 | M&L for face work masonry with 100-125 mm thick white/ chitter sand stone having rock face bushings not less than 15-20mm including chisel drafted margin 20-25 mm wide , local Jodhpur pattern (Kadaou) regular coursed well bonded bedded & solidly hearted built in CM 1:4 complete all as specified . Height of Kadaou stone course shall not be less than 200mm complete all as directed at site by GE. | 50 | Sqm | |
121 | 121 | M&L for keyed pointing to kadaou /Ashlar facework of Jodhpur sandstone in CM 1:3 as directed by GE. | 5 | X Sqm | |
122 | 122 | M&L for preparing old plastered surfaces and applying one coat of oil bound distemper on surfaces of walls all as directed by Engineer-in-Charge. | 1000 | Sqm | |
123 | 123 | M&L for preparing old plastered surfaces and applying one coat of oil bound distemper on surfaces of ceiling all as directed by Engineer-in-Charge. | 400 | Sqm | |
124 | 124 | Complete removal of existing treatment and applying two coat of exterior emulsion paint including 2 coat of birla white putty on surfaces of walls all as directed by Engineer-in-Charge. | 100 | Sqm | |
125 | 125 | Complete removal of existing treatment and applying two coat of plastic emulsion paint including two coat of birla white putty on surfaces of walls all as directed by Engineer-in-Charge. | 100 | Sqm | |
126 | 126 | Complete removal of existing treatment from walls all as directed by GE and applying two coats of birla white wall care putty to obtain smooth surfaces over a coat of alkali resistant primer and aplying two coats of oil bourd distemper. | 700 | Sqm | |
127 | 127 | Raking out joints/ pointing to stone masonry walls squared rubble Jodhpur type.\n | 25 | X Sqm | |
128 | 128 | M&L for keyed pointing in CM 1:3 to Squared rubble regular coursed Jodhpur type masonry using grey cement & pigment to match the shade of sand stone. | 30 | X Sqm | |
129 | 129 | M&L for prep of old previously treated surfaces & applying one coat of cement base paint on walls complete. | 30 | Sqm | |
130 | 130 | M&L for prep of newly plastered surfaces & applying two coat of cement base paint on walls complete. | 200 | Sqm | |
131 | 131 | S&F for gun metal gate valve 25mm dia, cast copper alloy screwed pressure with crutch or butterfly handle, screwed both ends for iron pipe for unions and fixed as in repairs | 5 | Each | |
132 | 132 | S&F for gun metal gate valve 20 mm dia, cast copper alloy screwed pressure with crutch or butterfly handle, screwed both ends for iron pipe for unions and fixed as in repairs | 5 | Each | |
133 | 133 | S&F for gun metal gate valve 15mm dia, cast copper alloy screwed pressure with crutch or butterfly handle, screwed both ends for iron pipe for unions and fixed as in repairs | 2 | Each | |
134 | 134 | S&F EWC complete including seat cover and PVC connection and fixed in repairs. | 5 | Each | |
135 | 135 | EWC complete set constellationdual flush (WB consetellation 5 ped constellation, EWC constellation, cist & lid CON dual flush, seat cover constellation, cistern fitting(water saver-dual flush) etc complete | 3 | Each | |
136 | 136 | S&Fin repair vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete fixed in repairs.(Cera Cat part No-53010102, Hindware Cat Part No.- 20042) | 5 | Each | |
137 | 137 | S&F wash hand basin vitreous china flat back size 550X400mm white with pedestal incluiding CP waste coupling waste pipe brackets complete fixed in repairs. | 4 | Each | |
138 | 138 | S&F in repairs fancy type vitreous WHB oval type with bottle trap fixed to granite ,complete all as specified and as directed. | 4 | Each | |
139 | 139 | S&F in repairs fancy type countertop vitreous WHB oval type fixed to granite with bottle trap ,complete all as specified and as directed.(Make :- Hindware , Cera or equivalent) | 4 | Each | |
140 | 140 | S&F in repairs PVC low level flushing cistern 10 ltrs and connections to pipes and fixing of lever with inlet, ball valve, folat and handle including brackets. | 10 | Each | |
141 | 141 | S&F in repair PVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete. | 15 | Each | |
142 | 142 | S&F in repair 600 x 450 mm bevelled edge mirror 5 mm thick ply of selected quality glass mounded on 6 mm thick AC building board or commercial ply wood and fixed to wooden fly with CP brass screw and cup washer all as specified. | 10 | Each | |
143 | 143 | S&F 6-8 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers,studs and spacers etc complete all as specified and as directed | 20 | Sqm | |
144 | 144 | S&F in repairs CP bottle trap Floor door stopper of aluminium alloy body 140mm long | 10 | Each | |
145 | 145 | S&F in repairs Floor door stopper of aluminium alloy body 140mm long | 5 | Each | |
146 | 146 | S&F in repair stainless steel cromium plated drapery rod 20-25 mm dia all as per sample and all as specified and directed by Engineer-in-charge. | 100 | RM | |
147 | 147 | S&F for stainless steel cromium plated Brackets fancy type for drapery rod all as specified and directed by Engineer-in-charge. | 60 | Pair | |
148 | 148 | S&F in repair bib taps 15 mm dia of chromium plated with crutch or butter fly handle screwed down screwed for brass ferrule or iron pipe. | 30 | Each | |
149 | 149 | S&F in repair 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Cat No QQT-7037 | 20 | Each | |
150 | 150 | Taking down 15mm dia bib taps/stop cock and changing washer etc including some minor repairs and fixing in repairs all as specified and directed and directed by Engr-in-charge. | 50 | Each | |
151 | 151 | S&F in repair 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Cat No QQT-7053 | 20 | Each | |
152 | 152 | S&F in repairs CP waste coupling 32mm dia for Wash hand basin. | 20 | Each | |
153 | 153 | S&F in repairs PVC waste water pipe for WHB of size 32 mm dia and 60 cm long including coupling all as specified and directed. | 20 | Each | |
154 | 154 | S&F in repair PVC connection pipe for WHB , cistern, geysers etc of sixe 15 mm dia and 450mm long fixed in repairs. | 50 | Each | |
155 | 155 | Over head Shower rose 150x150 mm of ABS Body chrome plated with grey face plate & with arm having swivel joint cromium plated best quality | 10 | Each | |
156 | 156 | M&L for 100mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including taking down. | 10 | Each | |
157 | 157 | M&L for 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including taking down. | 15 | Each | |
158 | 158 | Taking down PVC (SWR) pipes 110mm dia | 100 | RM | |
159 | 159 | S & F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall | 75 | RM | |
160 | 160 | S&F in repairs 110mm dia PVC (SWR) bends diminishing pieces or tapers. | 5 | Each | |
161 | 161 | S&F in repairs 110mm dia PVC (SWR) branch piece, single equal or unequal . | 5 | Each | |
162 | 162 | S & F 110mm bore PVC (SWR) bends with access door | 5 | Each | |
163 | 163 | S&F in repair sinks made of stainless steel 0.80 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm. as directed by Engr-in-Charge. | 2 | Each | |
164 | 164 | M&L Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre on concrete surfaces and sanding | 50 | Sqm | |
165 | 165 | S&F Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m | 50 | Sqm | |
166 | 166 | M&L PCC 1:2:4 type B0 using 12.5mm graded stone aggregate 25mm thick as in leveling course in sunken portions | 50 | Sqm | |
167 | 167 | M&L rendering 10mm thick in CM 1:4 finished fair and even with WPC @ 3% by wt of cement | 50 | Sqm | |
168 | 168 | Supply only water proofing compound (ISI Marked). | 3 | KG | |
169 | 169 | Cutting holes into or through stone walls built in cement mortar exc 400 sq.cm but n.exc 0.10 sq.m and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required basis and directed by Engineer-in-Charge. | 20 | Per centi meter of depth | |
170 | 170 | S & F in repair Soap dish, chromium plated | 10 | Each | |
171 | 171 | S & F tubular aluminium anodised 60 cm long towel rail 20mm dia D type complete fixed with screws etc. | 20 | Each | |
172 | 172 | S & F in repair 20mm bore dia ball brass valves high pressure ,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and complete all as specified and as directed by Engr-in- Charge. | 15 | Each | |
173 | 173 | Dismantling water tanks and removing to site (exc 250 and not exc 500 ltr capacity) | 5 | Each | |
174 | 174 | Dismantling water tanks and removing to site (exc500 and not exc 1000 ltr cap) | 5 | Each | |
175 | 175 | M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete fixed in repairs. | 5 | Each | |
176 | 176 | All as per ser No 175 but 1000 ltr capacity. | 5 | Each | |
177 | 177 | S & F in repair 600 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete. | 20 | Each | |
178 | 178 | S & F in repair pressure jet for western type water closet with PVC connection 600 t0 900 mm long including brass head screw and suitable washer. | 10 | Each | |
179 | 179 | S&F in repair 15mm bore CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts ISI Marked Make Jaquar Cat No QQT-CHR-7167B | 2 | Each | |
180 | 180 | S&F in repair CP wall mixture 3 in-1 system includingr 1.50m long tele shower and overhead shower of size 150x150mm with W.F. Make jaquqr Cat No QQT- 7281 | 2 | Each | |
181 | 181 | S & F in repair Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs Make Jaquar QQT-7011 | 20 | Each | |
182 | 182 | S&F in repair 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout all as per sample Make Jaquar CON-169KNB | 5 | Each | |
183 | 183 | S&F powder coated mild steel peg stay set of 05 nos of pegs all as specified and approved by Engr-in-Charge | 20 | Each | |
184 | 184 | S&F in repair PVC bathroom cabinet of approximate size 400mm x 300mm x 100mm or 110mm with mirror on face complete all as directed by Engr-in-Charge (Make : Prayag) | 5 | Each | |
185 | 185 | S&F in repair stainless steel toilet paper with cutting edge cover complete all as directed by Engr-in-Charge Make Jaquare CAN-CHR-1153N | 4 | Each | |
186 | 186 | S&F in Repair 15mm bore CP brass cocealed stop cock with adjustable wall flange screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Cat No QQT-7083K | 2 | Each | |
187 | 187 | S&F in repair Health foucet Make Jaquar ALD-573 with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and as directed and approved by Engineer-in-Charge. | 2 | Each | |
188 | 188 | S&F in repair angle cock cromium plated fancy type 15 mm bore /size Make JAQUAR QQT-CHR-7053 | 10 | Each | |
189 | 189 | S&F in reapir Two way angle cock cromium plated fancy type 15 mm bore /size Make JAQUAR | 5 | Each | |
190 | 190 | S&F in repair Two way Bib cock cromium plated fancy type 15 mm bore /size Make JAQUAR QQT-CHR-7041 | 5 | Each | |
191 | 191 | S&F in repairs 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixeed (minimum weight 142gms) | 50 | Each | |
192 | 192 | Taking up or down 15mm bore steel tubing and connections, complete all as specified and directed by Engineer-In-Charge. | 80 | RM | |
193 | 193 | Taking up or down 20mm bore steel tubing and connections, complete all as specified and directed by Engineer-In-Charge. | 60 | RM | |
194 | 194 | S&F 15mm bore GI tubes, galvanized, medium grade of following bore with all fitting and fixed with walls and ceiling or laid in floors complete all as specified and directed by Engineer-In-Charge. | 80 | RM | |
195 | 195 | S&F 20mm bore GI tubes, galvanized, medium grade of following bore with all fitting and fixed with walls and ceiling or laid in floors complete all as specified and directed by Engineer-In-Charge. | 60 | RM | |
196 | 196 | M&L for Providing precast cement concrete type B-0 1:2:4 (12.5mm Graded stone Aggregate) louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame set in CM 1:6 complete. | 100 | Sqm | |
197 | 197 | M&L for Providing precast cement concrete type B-1 1:2:4 (20mm Graded stone Aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match | 1 | Cum | |
198 | 198 | M&L for Pre-cast cement concrete block masonry 1:3:6 type C1 using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar, complete built in CM 1:6 all as directed by GE | 10 | Cum | |
199 | 199 | M&L for 10 cm thick precast cement conc solid blocks 1:3:6 type C1 using 20mm graded stone agg with plain or interlocking joints as directed) setting in mortar, built in CM 1:4 complete | 40 | Sqm | |
200 | 200 | M&L for 10 mm thick Rendering in CM 1:6 on fair faces of brick wk or concrete surfaces & finishing the surfaces even & smooth w/o using extra cement | 100 | Sqm | |
201 | 201 | S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc. | 30 | Sqm | |
202 | 202 | Taking down PVC (SWR) pipes 75mm dia | 100 | RM | |
203 | 203 | S & F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall | 50 | RM | |
204 | 204 | S&F in repairs 75mm dia PVC (SWR) bends diminishing pieces or tapers. | 5 | Each | |
205 | 205 | S&F in repairs 75mm dia PVC (SWR) branch piece, single equal or unequal . | 5 | Each | |
206 | 206 | S & F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint lead in trenches/floors | 50 | RM | |
207 | 207 | S & F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint lead in trenches/floors | 25 | RM | |
208 | 208 | S&F in repair sinks with drainage board made of stainless steel 0.80 mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. as directed by Engr-in-Charge. | 2 | Each | |
209 | 209 | Rubbing and poshing (mirror finish two or more coat) to kota stone or other similar surfaces in any position(verticle or horizontal) complete all as specified and ditected by Engineer-In-Charge. | 8000 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail