| 1 | 1 | Disconnecting of electric supply from LT control panel and starter of submersible pump motor, removing the pipe line connection from discharge side, lifting submersible pump motor set alongwith column pipe from bore well with the help of chain pulley blcok including transporting to workshop for repair complete all as specified and as directed by Engr-in-charge. | | 4 | Each |
|---|
| 2 | 2 | Reapiring, Lowering of submersible pumping set after repair and reconnecting with existing pipe line and making electric connection with the panel board including replacement of rusted nuts, bolts, rubber gaskets and clamps including transporting from workshop after repair complete all as specified and as directed by Engr-in-charge. | | 4 | Each Job |
|---|
| 3 | 3 | Rewinding of submersible motor with PVC insulated copper wire of existing gauge after removing the old sire and insulated material, cleaning of stator slots and making good for winding all insulating material for submersible motor of capacity5 HP and 20.00 GPH to 30.00 GPH at upto 90m head. Make: KSB/Kirloskar. | | 4 | Each Job |
|---|
| 4 | 4 | Disconnecting the submersible pumping set of capacity 5 HP to 12 HP and reassembling after repair/replacing spare parts including testing and commissioning.\nNote:-\n1. Spare parts required for replacement shall be measured and paid separately under relevant items as supply only.\n2. Make of spare parts shall be of KSB/Kirloskar or as OEM approved. | | 4 | Each Job |
|---|
| 5 | 4.01 | GM impellers suitable for pump motor 5 HP to 12 HP. | | 12 | Each |
|---|
| 6 | 4.02 | GM Bushes suitable for pump motor 5 HP to 12 HP. | | 12 | Each |
|---|
| 7 | 4.03 | Neck ring suitable for pump motor 5 HP to 12 HP. | | 8 | Each |
|---|
| 8 | 4.04 | Pump motor coupling stainless steel suitable for pump motor 5 HP to 12 HP. | | 4 | Each |
|---|
| 9 | 4.05 | Key to coupling stainless steel suitable for pump motor 5 HP to 12 HP. | | 4 | Each |
|---|
| 10 | 4.06 | Thrust plate fibre and stainless steel suitable for pump motor 5 HP to 12 HP. | | 2 | Each |
|---|
| 11 | 4.07 | Cable seal rubber suitable for pump motor 5 HP to 12 HP. | | 8 | Each |
|---|
| 12 | 4.08 | Repair to pump shaft by remetaling/grinding to make bearing/bush sizes | | 2 | Each |
|---|
| 13 | 4.09 | Bronze bush along with SS sleeve to rotor shaft suitable for pump motor 5 HP to 12 HP. | | 4 | Each |
|---|
| 14 | 4.1 | C.I. Bowl assy as per sample suitable for pump motor 5 HP to 12 HP. | | 8 | Each |
|---|
| 15 | 4.11 | Submersible cable for connection from inside motor to out side for electric connection including soldering etc of size 16 sq mm 3 core. | | 200 | RM |
|---|
| 16 | 4.12 | End cover both sides for submersible motor suitable for pump motor 5 HP to 12 HP. | | 2 | Each |
|---|
| 17 | 4.13 | T Bolt to motor suitable for pump motor 5 HP to 12 HP. | | 8 | Each |
|---|
| 18 | 4.14 | Housing for assembling of motor with pump suitable for pump motor 5 HP to 12 HP. | | 2 | Each |
|---|
| 19 | 4.15 | Coloumn pipe made of Mild Steel pipe of appropirate length 3 mtr each 50 mm dia having both end flange as per sample complete all as specified and directed. | | 20 | Each |
|---|
| 20 | 5 | S&F Change over switch (Side handle) of capacity 200 Amps , 4 pole, 415 volts, 50 Hz all as specified and directed by the Engr in charge. \nMake: L&T/Havells | | 2 | Each |
|---|
| 21 | 6 | S&F Battery cable leads of copper conductor and with lugs suitable for 12 V 180 AH for DG set all as specified and directed by Engr-in-Charge. | | 6 | Each |
|---|
| 22 | 7 | Supply, installation, testing and commissioning of booster pump set of cap 1 HP , 230 volts, 3 phase, 50 Hz complete all as specified and directed by Engr-in-charge. Make:Crompton model no MINI-FORCE II L&T/Havells | | 6 | Each |
|---|
| 23 | 8 | Supply, installation, testing and commissioning of submersible motor starter cap-05 HP, 415 volts, 3 phase, 50 Hz complete all as specified and directed by Engr-in-charge. Make: L&T/Havells | | 1 | Each |
|---|
| 24 | 9 | Supply, installation, testing and commissioning of submersible motor starter cap-12 HP, 415 volts, 3 phase, 50 Hz complete all as specified and directed by Engr-in-charge. Make: L&T/Havells | | 4 | Each |
|---|
| 25 | 10 | Excavation in trenches in hard/dense soil not exceeding 1.5mtr wide and not exceeding 1.5 depth, for foundation, etc, or for shafts, wells, cesspits, manhole, pier holes etc not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out, complete all as specified and directed. | | 150 | Cum |
|---|
| 26 | 11 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick. | | 135 | Cum |
|---|
| 27 | 12 | Removal of surplus soil not exceeding 50mtr and depositing where directed at level not exceeding 1.5mtr above the starting point | | 15 | Cum |
|---|
| 28 | 13 | S&F Steel water tubing medium grade, ISI marked, 25mm bore of pipe galvanised with all fittings and fixed to walls and ceilings or laid in floors, Complete all as specified. | | 50 | RM |
|---|
| 29 | 14 | S&F Steel water tubing medium grade, ISI marked, 40mm bore of pipe galvanised with all fittings and fixed to walls and ceilings or laid in floors, Complete all as specified. | | 80 | RM |
|---|
| 30 | 15 | S&F Steel water tubing medium grade, ISI marked, 50mm bore of pipe galvanised with all fittings and fixed to walls and ceilings or laid in floors, Complete all as specified. | | 150 | RM |
|---|
| 31 | 16 | S&F Steel water tubing medium grade, ISI marked, 80mm bore of pipe galvanised with all fittings and fixed to walls and ceilings or laid in floors, Complete all as specified. | | 150 | RM |
|---|
| 32 | 17 | S&F Steel water tubing medium grade, ISI marked, 100mm bore of pipe galvanised with all fittings and fixed to walls and ceilings or laid in floors, Complete all as specified. | | 50 | RM |
|---|
| 33 | 18 | S&F Gun metal globe or gate valve with iron wheel head, screwed both ends, heavy duty ISI marked suitable for 25 mm bore | | 5 | Each |
|---|
| 34 | 19 | S&F Gun metal globe or gate valve with iron wheel head, screwed both ends, heavy duty ISI marked suitable for 40 mm bore | | 3 | Each |
|---|
| 35 | 20 | S&F Gun metal globe or gate valve with iron wheel head, screwed both ends, heavy duty ISI marked suitable for 50 mm bore | | 5 | Each |
|---|
| 36 | 21 | Supply, laying and testing of 3 layer PP-R(Polythene random copolymer) pipes of size 50mm SDR 7.4 & SDR 11 UV stablished and antimicrobial fusion having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches | | 50 | RM |
|---|
| 37 | 22 | Supply, laying and testing of 3 layer PP-R(Polythene random copolymer) pipes of size 40 mm SDR 7.4 & SDR 11 UV stablished and antimicrobial fusion having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches | | 80 | RM |
|---|
| 38 | 23 | Supply, laying and testing of 3 layer PP-R(Polythene random copolymer) pipes of size 25 mm SDR 7.4 & SDR 11 UV stablished and antimicrobial fusion having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches | | 100 | RM |
|---|
| 39 | 24 | Supply and fixing PP-R gate valve of size 50mm(Brass insert in size) as per site requiremnet as directed and instructed by Engr-in - Charge | | 2 | Each |
|---|
| 40 | 25 | Supply and fixing PP-R gate valve of size 40mm(Brass insert in size) as per site requiremnet as directed and instructed by Engr-in - Charge | | 4 | Each |
|---|
| 41 | 26 | Supply and fixing PP-R gate valve of size 25mm(Brass insert in size) as per site requiremnet as directed and instructed by Engr-in - Charge | | 8 | Each |
|---|
| 42 | 27 | Cast Iron sluice valve duly ISI Marked with iron wheel head both end flanged , stainless steel spindle, non rising type complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed of 100 mm bore and PN 1.6 presssure rating | | 1 | Each |
|---|
| 43 | 28 | Cast Iron sluice valve duly ISI Marked with iron wheel head both end flanged , stainless steel spindle, non rising type complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed of 80 mm bore and PN 1.6 presssure rating | | 2 | Each |
|---|
| 44 | 29 | Supply and fixing reflux valve (non return valve ISI-5312) CI suitable for 100 mm bore pipe heavy duty both end flanged of pressure rating PN 1:6 and jointing with joint with rubber or fibre board gasket complete with and including required Nos size of nuts, bolts and washers complete all as specified. | | 1 | Each |
|---|
| 45 | 30 | Construction of valve pit of size 1050mmX1050mmX1050mm internal dimention stone masonary included all necessary excavation and earth work in hard/dense soil,returning ,filling in,disposal of surplus soil to a distance not exc 50m and depositing where directed .PCC in foundation of the mix (1:4:8) type D2 ,using 40mm graded stone aggregate, stone masonry in cement mortar (1:4), internally finished even and fair with cement mortar 1:3 and pointing flush externally in cement mortar 1:4 as the work proceeds ,mild steel frame , MS sheet cover 3.15mm thick with handle and locking arrangement , painting of all the exposed MS work with two coats of synthetic enamel paint of the tint as approved by the GE over a coat of red oxide primer and painting all the steel surfaces embedded in PCC with two coats of black bituminous paint and all other relevant works complete all as specified and shown on drawing. | | 2 | Each |
|---|
| 46 | 31 | S&F water flexible suction pipe dia 100 mm, thickness 3 mm complete all as specified and directed. | | 6 | RM |
|---|
| 47 | 32 | S&F, Check valve/foot valve dia 100mm complete all as specified and directed. | | 4 | Each |
|---|
| 48 | 33 | S&F Fully automatic star delta starter suitable for motor cap up to 20 HP/9.3 KV, 415 volts 50 Hz in built of sheet-steel enclosuren metal type MKIFASD. Cat Part No 5596254. Make: L&T. | | 3 | Each |
|---|
| 49 | 34 | Cleaning of UG Sump of Cap 2,50,000 ltr and painting of internal surfaces and external exposed surfaces, repairing of damaged plaster, manhole and other connected works. | | 2 | Each Job |
|---|
| 50 | 35 | Cleaning of MS OH Tank of Cap 25,000 ltr and painting of internal surfaces and external exposed surfaces, repairing of tank by welding , replacement of packing, nuts and bolts and other connected works. | | 1 | Each Job |
|---|
| 51 | 36 | Note:- Deduction for amount of Rs. 53,980.00 as listed in Schedule A Part-II (Schedule of credit) shall be made while awarding of contract. | | | |
|---|
