| 1 | 1 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet | | 12.25 | Sqm |
|---|
| 2 | 2 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposals of unserviceable material within 50 meters lead as per direction of Engineer- in-charge : In cement mortar | | 6.57 | Cum |
|---|
| 3 | 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | | 0.75 | Cum |
|---|
| 4 | 4 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete - Thermo- Mechanically Treated bars of grade Fe-500D or more. | | 58.02 | Kg |
|---|
| 5 | 5 | Centring and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. | | 5.48 | Sqm |
|---|
| 6 | 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing : in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) | | 4.69 | Cum |
|---|
| 7 | 7 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level | | 4.69 | Cum |
|---|
| 8 | 8 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) | | 84.48 | Sqm |
|---|
| 9 | 9 | Distempering with oil bound washable distemper of approved brand and manufacture to given an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer | | 84.48 | Sqm |
|---|
| 10 | 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia: Second class kail wood | | 0.06 | Cum |
|---|
| 11 | 11 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws: Second class Kail wood of 30mm thickness | | 1.75 | Sqm |
|---|
| 12 | 12 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS :4992 with necessary screws etc. complete : 100 mm | | 1 | Each |
|---|
| 13 | 13 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm | | 10 | Each |
|---|
| 14 | 14 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish | | 3.2 | Sqm |
|---|
| 15 | 15 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete - Welded | | 1054.59 | Kg |
|---|
| 16 | 16 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture | | 76.28 | Sqm |
|---|
| 17 | 17 | Providing corrugated G. S. sheet roofing including vertical/curved surface with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in\nhorizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required-6 0.50 mm thick with zinc coating not less than 275 gram/m2 | | 12.25 | Sqm |
|---|
| 18 | 18 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering, all work upto plinth level with: - 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) | | 6.38 | Cum |
|---|
| 19 | 19 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | | 300 | Sqm |
|---|
| 20 | 20 | Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. | | 300 | Sqm |
|---|
| 21 | 21 | GST@18% | 59 | 1 | Lot |
|---|
